Vishay JM38510/11608BCC Cmos analog switch Datasheet

DG304A/305A/306A/307A
Vishay Siliconix
CMOS Analog Switches
Low Level Switching Circuits
Programmable Gain Amplifiers
Portable and Battery Powered
Systems
15-V Input Range
Fast Switching—tON: 110 ns
Low rDS(on): 30 Single Supply Operation
CMOS Logic Levels
Micropower: 30 nW
Full Rail-to-Rail Analog Signal Range
Low Signal Error
Wide Dynamic Range
Low Power Dissipation
The DG304A through DG307A series of monolithic CMOS
switches were designed for applications in communications,
instrumentation and process control. This series is well suited
for applications requiring fast switching and nearly flat
on-resistance over the entire analog range.
applications,
without
sacrificing
switching
speed.
Break-before-make switching action is guaranteed, and an
epitaxial layer prevents latchup. Single supply operation (for
positive switch voltages) is allowed by connecting the V– rail
to 0 V.
Designed on the Vishay Siliconix PLUS-40 CMOS process to
achieve low power consumption and excellent on/off switch
performance, these switches are ideal for battery powered
Each switch conducts equally well in both directions when on,
and blocks up to the supply voltage when off. These switches
are CMOS input compatible.
DG304A
DG304A
Dual-In-Line
Metal Can
V+ (Substrate and Case)
NC
D1
NC
S1
NC
IN1
GND
1
14
2
13
3
12
4
11
V+
D1
D2
D2
10
1
NC
9
S1
2
S2
5
10
NC
6
9
IN2
7
8
V–
S2
IN1
8
7
3
6
4
NC
5
V–
IN2
Logic
Switch
0
OFF
1
ON
Logic “0” 3.5 V
1 11 V
Logic “1”
GND
Top View
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
Top View
www.vishay.com FaxBack 408-970-5600
4-1
DG304A/305A/306A/307A
Vishay Siliconix
DG305A
DG305A
Dual-In-Line
Metal Can
V+ (Substrate and Case)
NC
D1
NC
S1
NC
IN
GND
1
14
2
13
12
3
11
4
V+
D1
D2
NC
10
NC
6
9
NC
7
8
V–
S2
2
IN
9
S1
S2
5
D2
10
1
7
SW1
0
OFF
ON
1
ON
OFF
NC
5
SW2
Logic “0” 3.5 V
1 11 V
Logic “1”
6
4
NC
Logic
8
3
V–
GND
Top View
Top View
DG306A
Dual-In-Line
NC
V+
1
14
S3
2
13
S4
Logic
Switch
D3
3
12
D4
0
OFF
D1
4
11
D2
S1
5
10
S2
IN1
6
9
IN2
7
8
GND
1
ON
Logic “0” 3.5 V
Logic “1” 11 V
V–
Top View
DG307A
Dual-In-Line
NC
S3
D3
Four SPST Switches per Package
14
2
13
S4
Logic
12
D4
0
OFF
ON
1
ON
OFF
3
D1
4
11
D2
S1
5
10
S2
IN1
6
9
IN2
7
8
GND
V+
1
SW1, SW2 SW3, SW4
Logic “0” 3.5 V
Logic “1” 11 V
V–
Top View
www.vishay.com FaxBack 408-970-5600
4-2
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
DG304A/305A/306A/307A
Vishay Siliconix
Temp Range
Package
Part Number
DG304A
–0 to 70_C
14-Pin Plastic DIP
DG304ACJ
DG304AAK/883
14-Pin CerDIP
JM38510/11605BCA
–55
55 to 125
125_C
C
10-Pin Can
JM38510/11605BIA
14-Pin Sidebraze
JM38510/11605BCC
14-Pin CerDIP
JM38510/11605BCA
10-Pin Can
JM38510/11606BIC
14-Pin Sidebraze
JM38510/11606BCA
DG305A
–55
55 to 125_C
125 C
DG306A
–0 to 70_C
14-Pin Plastic DIP
DG306ACJ
DG306AAK/883
14-Pin CerDIP
–55
125_C
55 to 125
C
JM38510/11607BCA
14-Pin Sidebraze
JM38510/11607BCC
DG307A
0 to 70_C
14-Pin Plastic DIP
–25 to 85_C
DG307ACJ
DG307ABK
DG307AAK
14 Pi CerDIP
14-Pin
C DIP
DG307AAK/883
–55
55 to 125
125_C
C
JM38510/11608BCA
14-Pin Sidebraze
JM38510/11608BCC
Voltages Referenced to V–
V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V
GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V
Power Dissipationb
14-Pin Plastic DIPc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 mW
14-Pin CerDIPd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 mW
10-Pin Metal Cane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 mW
Digital Inputsa, VS, VD . . . . . . . . . . . . . . . . . . . . . . . . . (V–) –2 V to (V+) +2V or
30 mA, whichever occurs first
Current, Any Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Continuous Current, S or D
(Pulsed at 1 ms, 10% duty cycle max) . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Storage Temperature
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
(AAA, AAK, ABK Suffix) . . . . . . –65 to 150_C
(ACJ Suffix) . . . . . . . . . . . . . . . . . –65 to 125_C
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V– will be clamped by internal
diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 11 mW/_C above 75_C
d. Derate 6.5 mW/_C above 25_C
e. Derate 6 mW/_C above 75_C
www.vishay.com S FaxBack 408-970-5600
4-3
DG304A/305A/306A/307A
Vishay Siliconix
B, C Suffix
Test Conditions
Unless Specified
A Suffix
–25 to 85_C
0 to 70_C
–55 to 125_C
V+ = 15 V,
V V– = –15 V
VIN = 3.5 V or 11 Vf
Tempb
VANALOG
Full
Drain-Source On-Resistance
rDS(on)
VD = 10 V, IS = 10 mA
Room
Full
30
Source Off Leakage Current
IS(off)
VS = 14 V
VD = 14 V
Room
Full
0.1
–1
–100
1
100
–5
–100
5
100
Drain Off Leakage Current
ID(off)
VS = 14 V
VD = 14 V
Room
Full
0.1
–1
–100
1
100
–5
–100
5
100
Drain On Leakage Current
ID(on)
VD = VS = 14 V
Room
Full
0.1
–2
–200
2
200
–5
–200
5
200
VIN = 5 V
Room
Full
–0.001
–1
–1
VIN = 15 V
Room
Full
0.001
VIN = 0 V
Room
Full
–0.001
Room
110
250
Room
70
150
tOPEN
DG305A/307A ONLY
See Figure 3
Room
50
Q
CL = 1 nF, Rgen = 0
Vgen = 0 V, See Figure 4
Room
30
Room
14
Room
14
P
Parameter
S b l
Symbol
Typc
Mind Maxd Mind Maxd
U i
Unit
Analog Switch
Analog Signal Rangee
–15
15
–15
50
75
15
V
50
75
W
nA
A
Digital Control
Input
p Current
with
ith IInputt Voltage
V lt
High
Hi h
Input Current
with Input Voltage Low
IINH
IINL
–1
1
1
1
–1
–1
mA
A
–1
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
Break-Before-Make Time
Charge Injection
Source-Off Capacitance
CS(off)
Drain-Off Capacitance
CD(off)
Channel-On Capacitance
CD(on)
Input Capacitance
CIN
See Figure 2
f = 1 MHz,
MHz VS = 0 V
VS, VD = 0 V
f = 1 MHz
Room
40
VIN = 0 V
Room
6
VIN = 15 V
Room
7
Off-Isolation
OIRR
VIN = 0 V,, RL = 1 kW
Room
62
Crosstalk (Channel-to-Channel)
XTALK
VS = 1 V rms, f = 500 kHz
Room
74
Room
Full
0.001
Room
Full
–0.001
ns
pC
pF
F
dB
Power Supplies
Positive Supply Current
I+
VIN = 15 V or 0 V
(All Inputs)
I
t )
Negative Supply Current
I–
10
100
–10
–100
100
–100
mA
Notes:
a. Refer to PROCESS OPTION FLOWCHART.
b. Room = 25_C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e. Guaranteed by design, not subject to production test.
f.
VIN = input voltage to perform proper function.
www.vishay.com S FaxBack 408-970-5600
4-4
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
DG304A/305A/306A/307A
Vishay Siliconix
_ rDS(on) vs. VD and Power Supply
rDS(on) vs. VD and + Power Supply Voltage
)
)
100
80
5 V
60
7.5 V
40
10 V
15 V
20
20 V
TA = 25_C
V– = 0 V
100
+7.5 V
r DS(on)– Drain-Source On-Resistance (
r DS(on)– Drain-Source On-Resistance (
TA = 25_C
80
+10 V
60
+15 V
+20 V
40
20
0
0
–20
–15
–10
–5
0
5
10
15
20
0
5
VD – Drain Voltage (V)
10
15
20
VD – Drain Voltage (V)
Input Switching Threshold vs. V+ and V–
Supply Voltages
Leakage Currents vs. Analog Voltage
10
10
TA = 25_C
9
0
ID(off) or IS(off)
8
7
6
ID(on)
V T (V)
I S, I D (pA)
–10
–20
5
4
3
–30
2
1
–40
0
–15 –12
–9
–6
–3
0
3
6
9
12
15
5
0
15
20
V+, V– Positive & Negative Supplies (V)
VD or VS – Drain or Source Voltage (V)
Switching Time vs. Positive Supply Voltage
Switching Time vs. Negative Supply Voltage
240
240
V– = –15 V
TA = 25_C
VINH = 15 V
VINL = 0 V
200
V+ = 15 V
TA = 25_C
VINH = 15 V
VINL = 0 V
200
tON
t ON , t OFF (ns)
t ON , t OFF (ns)
10
160
120
tOFF
80
160
tON
120
tOFF
80
40
40
0
5
10
V+ – Positive Supply Voltage (V)
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
15
0
–5
–10
–15
V– – Negative Supply Voltage (V)
www.vishay.com S FaxBack 408-970-5600
4-5
DG304A/305A/306A/307A
Vishay Siliconix
TYPICAL CHARACTERISTICS (25_C UNLESS NOTED)
Supply Currents vs. Toggle Frequency
8
V+ = 15 V
RL = CL = 0
VS = Open
I+, I– (mA)
6
4
2
0
1k
10 k
100 k
1M
f – Frequency (Hz)
SCHEMATIC DIAGRAM (TYPICAL CHANNEL)
V+
S
V–
Level
Shift/
Drive
VIN
V+
GND
D
V–
FIGURE 1.
TEST CIRCUITS
+15 V
Logic “1” = Switch On
V+
VS = 3 V
S
Logic
Input
D
VINH
50%
VO
0V
IN
RL
300 15 V
CL
33 pF
VS
V–
GND
90%
10%
0V
–15 V
CL (includes fixture and stray capacitance)
VO = VS
4-6
tON
tOFF
RL
RL + rDS(on)
www.vishay.com S FaxBack 408-970-5600
Switch
Output
FIGURE 2. Switching Time
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
DG304A/305A/306A/307A
Vishay Siliconix
+15 V
V+
VS1 = 3 V
VS2 = 3 V
Logic “1” = Switch On
Logic
Input
S1
D1
S2
D2
VO1
VO2
IN
V–
GND
Switch
Output
RL1
300 W
RL2
300 W
CL1
33 pF
CL2
33 pF
VINH
50%
0V
VS1
50%
VO1
0V
VS2
VO2
Switch
Output
50%
0V
tBBM
–15 V
CL (includes fixture and stray capacitance)
FIGURE 3. Break-Before-Make SPDT (DG305A, DG307A)
+15 V
Rg
V+
S
IN
Vg
DVO
D
VO
VO
CL
1 nF
3V
INX
ON
V–
GND
OFF
ON
Q = DVO x CL
–15 V
FIGURE 4. Charge Injection
GND
Voltage
(V)
VIN
Logic Input
Voltage
VINH(min)/VINL(max)
(V)
VS or VD
Analog Voltage
Range
(V)
–15
0
11/3.5
–15 to 15
–20
0
11/3.5
–20 to 20
0
0
11/3.5
0 to 15
V+
Positive Supply
Voltage
(V)
V–
Negative Supply
Voltage
(V)
15
20
15
Notes:
a. Application Hints are for DESIGN AID ONLY, not guaranteed and not subject to production testing.
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
www.vishay.com FaxBack 408-970-5600
4-7
DG304A/305A/306A/307A
Vishay Siliconix
+15 V
–15 V
10 k
VIN
10 k
VOUT
+15 V
–15 V
10 k
10 k
100 k
1 M
A1
A0
DG304A
Binary
Input
Gain
11
10
01
00
1
10
100
1000
FIGURE 5. Low Power Binary to 10n Gain Low Frequency Amplifier
+15 V
–15 V
–15 V
VIN1
+15 V
VOUT
VIN2
CMOS Logic
Input Select
High = VIN1
–15 V
+15 V
CMOS Logic
Gain Select
High = 10x
1x
10x
DG307A
GND
20 k
180 k
FIGURE 6. Low Power Non-Inverting Amplifier with Digitally Selectable Inputs and Gain
www.vishay.com FaxBack 408-970-5600
4-8
Document Number: 70045
S-52880—Rev. C, 28-Apr-97
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1