Taiyo Yuden JMK212ABJ105KA-T Notice for taiyo yuden product Datasheet

Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
11
notice_e-01
HIGH VALUE MULTILAYER CERAMIC CAPACITORS
WAVE
■ FEATURES
■ APPLICATIONS
◦The use of nickel as electrode material and plating processing improve the solderability and heat resistance characteristics. It also
prevents migration and raises the level of reliability.
◦General digital circuit
REFLOW
◦Power supply bypass capacitors
Liquid crystal modules
Liquid crystal drive voltage lines
LSI, IC, converters(both for input and output)
◦Low equivalent series resistance(ESR) provides superior noise absorption characteristics.
◦Smoothing capacitors
DC-DC converters (for both input and output)
Switching power supplies (secondary side)
◦Compared to tantalum or aluminum electrolytic capacitors, multilayer
ceramic capacitors offer a number of superior features, including:
Higher permissible ripple current values
Smaller case sizes with high rated voltage
Improved reliability due to higher insulation resistance and breakdown
voltage.
■ PART NUMBER
J
M K
❶
❷
❶Rated
voltage
〔VDC〕
A
4
J 6.3
L 10
E 16
T 25
G 35
U 50
3
❸
❷Series name
Multilayer
M ceramic
capacitor
❸End
termination
K Plated
Code Type
△ ALL
107
L
Standard
1.6+0.15/-0.05
212
2.0+0.15/-0.05
316
3.2±0.2
325
3.2±0.3
1
6 △ B
❹
❺
❹Dimension
Type (inch) L×W[mm]
107 (0603) 1.6×0.8
212 (0805) 2.0×1.25
316 (1206) 3.2×1.6
325 (1210) 3.2×2.5
J
1
6 M L - T △
0
❻
❼
❻Temperature
characteristics code
B
BJ
X5R
B7
X7R
F
△F
Y5V
△=Blank space
❽
❼Nominal
capacitance
〔pF〕
example
473
47,000
105 1,000,000
❽Capacitance
tolerance
K
±10%
M
±20%
Z
❿
⓫
❿Special code
- Standard
+80%
-20
❺Dimension tolerance[mm]
T
Code Type
L
W
T
Standard
0.45±0.05
107 1.6+0.2/-0 0.8+0.2/-0
0.8+0.15/-0.05
0.8+0.2/-0
B
0.45±0.05
0.85±0.1
212 2.0+0.2/-0 1.25+0.2/-0
1.25+0.15/-0.05
0.85±0.1
1.25+0.2/-0
1.25+0.15/-0.05
△=Blank space
0.85±0.1
1.6±0.2
1.6±0.2
2.5±0.3
2.5±0.3
W
Standard
0.8+0.15/-0.05
A
❾
⓬
⓬Internal code
△
Standard
△=Blank space
❾
Thickness
〔mm〕
K 0.45
A
0.8
D 0.85
G 1.25
L
1.6
N
1.9
Y 2.0max
M
2.5
T
P
⓫Packaging
φ178mm Taping
(4mm pitch)
All types
φ178mm Taping
(4mm pitch,
1000pcs/reel)
1210Type
Thickness:M
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
L
W
□MK107
(0603 inch)
1.6±0.10
0.8±0.10
□MK212
(0805 inch)
2.0±0.10
1.25±0.10
□MK316
(1206 inch)
3.2±0.15
1.6±0.15
□MK325
(1210 inch)
3.2±0.30
2.5±0.20
Dimension [mm]
T
0.45±0.05
0.8±0.10
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.10
1.25±0.10
1.6±0.20
0.85±0.10
1.9±0.20
1.9+0.1/-0.2
2.5±0.20
Standard quantity [pcs]
Paper tape Embossed tape
e
K
A
K
D
G
D
G
L
D
N
Y
M
0.35±0.25
—
4000
0.5±0.25
0.5+0.35/-0.25
4000
—
—
4000
3000
—
3000
2000
—
2000
—
0.6±0.3
(P)
500
(T), 1000
■ AVAILABLE CAPACITANCE RANGE
107
Type
Cap
X7R
B/X5R
〔μF〕 VDC 50 25 16 10 6.3 50 35 25 16 10
〔3-digit〕
0.1
104
0.15 154
0.22 224 A
A A A
A A A
0.33 334
0.47 474 A A A A A A
A A A
0.68 684
1
105
A A A A A A A A A
2.2 225
A
A A A
3.3 335
4.7
475
A A
6.8 685
10
106
A
22
226
47
476
100 107
212
316
325
F/Y5V
X7R
B/X5R
F/Y5V
X7R
B/X5R
F/Y5V
X7R
B/X5R
F/Y5V
6.3 4 50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 4 35 25 16 10 50 25 16 10 6.3 50 35 25 16 10 6.3 16 10 6.3
A
A
A
G
G
A
G
G
A A
G
G
G
G
G
A A G G G G G
A A
G G G
G G G
A A
A
G G
L
G G G
G G G G
G G G
G G
G
L
L L
L L L L
G
G
G G
L L
L
L L L L
L
L
L L
L L L
L L L L
L L L
L L L
L
L L
L L
N
N
M N N
N
M N N N
N N
M N M.N N N
M M
M M.Y Y N N
N
M M
M M M.N
M M.Y
Note:Letters in the table indicate product thickness. ■■ X5R only
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
4
11
mlcc01_e-01
●Low Profile Multilayer Ceramic Capacitors
Cap
〔μF〕
Type
107
212
316
325
B/X5R
X7R
B/X5R
F/Y5V
B/X5R
F/Y5V
B/X5R
25 16 10 6.3 16 10 50 25 16 10 6.3 50 10 6.3 50 25 16 10 6.3 50 35 10 6.3 25 16 10
VDC
〔3-digit〕
0.1
104
0.22
224
0.33
334
0.47
474
D
D
0.68
684
1
105
K K K K D D D D D D
2.2
225
K K D D
D D D
3.3
335
4.7
475
K K
D
D D D. K
6.8
685
10
106
D D
22
226
47
476
Note:Letters in the table indicate product thickness.
Temp.char.
Code
BJ
D
B7
F
D
D.K
D D
D D D
Capacitance
Capacitance tolerance〔%〕
change〔%〕
±10
±10(K)
±15
±20(M)
±15
+30/-80
+80
(Z)
-20
+22/-82
G
D D D D D
D.K
D
Temperature characteristics
Applicable
Temperature Ref. Temp.
standard
range〔℃〕
〔℃〕
-25~+85
20
JIS
B
EIA
X5R
-55~+85
25
25
EIA
X7R -55~+125
-25~+85
20
JIS
F
EIA
Y5V
-30~+85
25
D D D D
D D D
D
D
D
G D
D D D D
D
■■ X5R only
●107TYPE
【Temperature Characteristic BJ:B/X5R】
・0.8mm thickness
(A)
Rated
voltage
50V
35V
25V
16V
10V
6.3V
4V
Part number 1
Part number 2
UMK107 BJ474□A
UMK107 BJ105□A
GMK107 BJ105□A
TMK107 BJ224□A
TMK107 BJ474□A
TMK107 BJ105□A
TMK107 BJ225□A
EMK107 BJ224□A
EMK107 BJ474□A
EMK107 BJ105□A
EMK107 BJ225□A
EMK107 BJ475□A
LMK107 BJ224□A
LMK107 BJ474□A
LMK107 BJ105□A
LMK107 BJ225□A
LMK107 BJ475□A
LMK107 BJ106MA
JMK107 BJ225□A
JMK107 BJ475□A
JMK107 BJ106MA
AMK107 BJ106MA
AMK107 BJ226MA
UMK107ABJ474□A
TMK107ABJ225□A
EMK107ABJ475□A
LMK107BBJ106MA
JMK107ABJ106MA
AMK107BBJ226MA
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R
B/X5R
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
0.47
1
1
0.22
0.47
1
2.2
0.22
0.47
1
2.2
4.7
0.22
0.47
1
2.2
4.7
10
2.2
4.7
10
10
22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±20
±20
10
10
5
3.5
3.5
5
10
3.5
3.5
5
10
10
3.5
3.5
5
10
10
10
10
10
10
10
10
0.8+0.15/-0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8+0.15/-0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8+0.15/-0.05
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8+0.2/-0
0.8±0.1
0.8±0.1
0.8+0.15/-0.05
0.8±0.1
0.8+0.2/-0
R
R
R
R/W
R
R
R
R/W
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R
X5R
X5R
B/X5R
X5R
X5R
1
1
1
2.2
4.7
1
2.2
4.7
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
150%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
D
Special code:L
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
D
Special code:L
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
Internal
code
(P/N 1)
Note
Note
CAPACITORS
■ REPRESENTATIVE PART NUMBERS
D
D
D
・0.45mm thickness
(K)
Rated
voltage
25V
16V
10V
6.3V
Part number 1
TMK107 BJ105□K
EMK107 BJ105□K
LMK107 BJ105□K
LMK107 BJ225□K
LMK107 BJ475MK
JMK107 BJ105□K
JMK107 BJ225□K
JMK107 BJ475MK
Part number 2
LMK107BBJ475MK
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R】
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK107 B7224□A
UMK107 B7474□A
TMK107 B7474□A
TMK107 B7105□A
EMK107 B7224□A
EMK107 B7474□A
EMK107 B7105□A
LMK107 B7224□A
LMK107 B7474□A
LMK107 B7105□A
LMK107 B7225□A
JMK107 B7224□A
JMK107 B7474□A
JMK107 B7105□A
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
0.47
1
0.22
0.47
1
0.22
0.47
1
2.2
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
3.5
3.5
5
3.5
3.5
5
10
3.5
3.5
5
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R/W
R
R
R/W
R
R
R
R/W
R
R
R
R
R
Capacitance tolerance code is applied to □ of part number.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
11
5
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic F:Y5V】
Rated
voltage
50V
25V
16V
10V
Part number 1
UMK107
TMK107
EMK107
EMK107
EMK107
EMK107
LMK107
LMK107
Part number 2
F104ZA
F474ZA
F224ZA
F474ZA
F105ZA
F225ZA
F105ZA
F225ZA
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.1
0.47
0.22
0.47
1
2.2
1
2.2
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
7
7
7
7
16
16
16
16
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R/W
R/W
R/W
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*
B/X5R*1
B/X5R*1
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
X5R
B/X5R*1
B/X5R*1
X5R
X5R
B/X5R
X5R*1
X5R
X5R
0.1
0.22
0.47
1
2.2
4.7
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±20
3.5
3.5
3.5
5
5
10
5
5
10
5
5
10
10
5
10
10
10
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.15/-0.05
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.2/-0
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.2/-0
R/W
R/W
R/W
R/W
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
B/X5R
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R
X5R
X5R
X5R
X5R
1
0.47
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
4.7
10
22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
3.5
5
5
10
5
5
10
10
3.5
5
10
10
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
150%
150%
150%
150%
150%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
200%
200%
150%
150%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
Internal
code
(P/N 1)
●212TYPE
【Temperature Characteristic BJ:B/X5R】
・1.25mm thickness
(G)
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK212 BJ104□G
UMK212 BJ224□G
UMK212 BJ474□G
UMK212 BJ105□G
TMK212 BJ225□G
TMK212 BJ475□G
EMK212 BJ225□G
EMK212 BJ475□G
EMK212 BJ106□G
LMK212 BJ225□G
LMK212 BJ475□G
LMK212 BJ106□G
LMK212 BJ226MG
JMK212 BJ475□G
JMK212 BJ106□G
JMK212 BJ226MG
JMK212 BJ476MG
Part number 2
1
TMK212ABJ475□G
EMK212ABJ475□G
EMK212ABJ106□G
LMK212ABJ475□G
LMK212ABJ106□G
LMK212BBJ226MG
JMK212ABJ475□G
JMK212ABJ106□G
JMK212ABJ226MG
JMK212BBJ476MG
・0.85mm thickness
(D)
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK212 BJ105□D
TMK212 BJ474□D
TMK212 BJ105□D
TMK212 BJ225□D
TMK212 BJ475□D
EMK212 BJ105□D
EMK212 BJ225□D
EMK212 BJ475□D
EMK212 BJ106□D
LMK212 BJ105□D
LMK212 BJ225□D
LMK212 BJ475□D
LMK212 BJ106□D
JMK212 BJ475□D
JMK212 BJ106□D
JMK212 BJ226MD
UMK212ABJ105□D
TMK212ABJ225□D
TMK212BBJ475□D
EMK212ABJ225□D
EMK212ABJ106□D
LMK212ABJ106□D
JMK212ABJ106□D
JMK212ABJ226MD
D
D
D
・0.45mm thickness
(K)
Rated
voltage
10V
6.3V
Part number 1
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
LMK212 BJ475□K
JMK212 BJ475□K
JMK212 BJ106MK
LMK212ABJ475□K
JMK212ABJ475□K
JMK212ABJ106MK
X5R
X5R
X5R
4.7
4.7
10
±10, ±20
±10, ±20
±20
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
Note
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
6
11
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7:X7R】
・1.25mm thickness
(G)
Rated
voltage
50V
35V
25V
16V
6.3V
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
UMK212 B7104□G
UMK212 B7224□G
UMK212 B7474□G
UMK212 B7105□G
GMK212 B7105□G
TMK212 B7105□G
TMK212 B7225□G
TMK212 B7475□G
EMK212 B7105□G
EMK212 B7225□G
EMK212 B7475□G
LMK212 B7105□G
LMK212 B7225□G
LMK212 B7475□G
LMK212 B7106MG
JMK212 B7106□G
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1
0.22
0.47
1
1
1
2.2
4.7
1
2.2
4.7
1
2.2
4.7
10
10
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
3.5
3.5
3.5
10
3.5
3.5
10
10
3.5
10
10
3.5
5
10
10
10
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.15/-0.05
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
R/W
R/W
R/W
R/W
R/W
R/W
R
R
R/W
R
R
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
0.47
1
2.2
1
2.2
4.7
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
5
5
3.5
5
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R/W
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.47
1
2.2
4.7
10
10
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
7
7
7
9
16
16
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R/W
R/W
R/W
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
0.22
2.2
4.7
+80/-20
+80/-20
+80/-20
7
9
16
0.85±0.1
0.85±0.1
0.85±0.1
R/W
R
R
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
EMK316ABJ226ML
B/X5R*1
X5R
B/X5R*1
B/X5R
X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R
X5R
X5R
X5R
1
4.7
2.2
4.7
10
2.2
4.7
10
22
10
22
47
10
22
47
100
100
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
±10, ±20
±10, ±20
±20
±20
±20
3.5
10
3.5
5
5
3.5
5
5
10
5
10
10
5
10
10
10
10
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
R
Part number 2
TMK212AB7475□G
LMK212AB7106MG
JMK212AB7106□G
HALT
% Rated
voltage
200%
150%
150%
150%
150%
150%
150%
150%
200%
150%
150%
200%
200%
150%
150%
150%
Internal
code
(P/N 1)
HALT
% Rated
voltage
200%
200%
150%
200%
200%
150%
Internal
code
(P/N 1)
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
150%
200%
150%
150%
200%
200%
150%
150%
200%
150%
150%
200%
200%
200%
150%
150%
Internal
code
(P/N 1)
Note
Note
R
D
CAPACITORS
10V
Temp.
char.
Part number 1
D
・0.85mm thickness
(D)
Rated
voltage
16V
10V
Part number 1
EMK212 B7474□D
EMK212 B7105□D
EMK212 B7225□D
LMK212 B7105□D
LMK212 B7225□D
LMK212 B7475□D
Part number 2
EMK212AB7225□D
LMK212AB7225□D
LMK212AB7475□D
Note
R
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:Y5V】
・1.25mm thickness
(G)
Rated
voltage
Part number 1
50V
UMK212
UMK212
EMK212
LMK212
LMK212
JMK212
16V
10V
6.3V
Part number 2
F474ZG
F105ZG
F225ZG
F475ZG
F106ZG
F106ZG
・0.85mm thickness
(D)
Rated
voltage
Part number 1
50V
10V
6.3V
UMK212 F224ZD
LMK212 F225ZD
JMK212 F475ZD
Part number 2
●316Type
【Temperature Characteristic BJ:B/X5R】
・1.6mm thickness
(L)
Rated
voltage
50V
25V
16V
10V
6.3V
4V
Part number 1
UMK316 BJ105□L
UMK316 BJ475□L
TMK316 BJ225□L
TMK316 BJ475□L
TMK316 BJ106□L
EMK316 BJ225□L
EMK316 BJ475□L
EMK316 BJ106□L
EMK316 BJ226ML
LMK316 BJ106□L
LMK316 BJ226ML
LMK316 BJ476ML
JMK316 BJ106□L
JMK316 BJ226□L
JMK316 BJ476ML
JMK316 BJ107ML
AMK316 BJ107ML
LMK316ABJ226ML
LMK316ABJ476ML
JMK316ABJ226□L
JMK316ABJ476ML
JMK316ABJ107ML
AMK316ABJ107ML
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
11
7
■ REPRESENTATIVE PART NUMBERS
・0.85mm thickness
(D)
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK316 BJ105□D
UMK316 BJ225□D
UMK316 BJ475□D
TMK316 BJ105□D
TMK316 BJ225□D
TMK316 BJ475□D
TMK316 BJ106□D
EMK316 BJ225□D
EMK316 BJ475□D
EMK316 BJ106□D
EMK316 BJ226MD
LMK316 BJ475□D
LMK316 BJ106□D
LMK316 BJ226MD
JMK316 BJ106□D
JMK316 BJ226MD
JMK316 BJ476MD
Part number 2
UMK316ABJ475□D
TMK316ABJ106□D
EMK316ABJ226MD
LMK316ABJ226MD
JMK316ABJ226MD
JMK316ABJ476MD
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
B/X5R
X5R
B/X5R
B/X5R
X5R
X5R
B/X5R
B/X5R
X5R
X5R
B/X5R
B/X5R
X5R
B/X5R
X5R
X5R
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
3.5
3.5
10
3.5
3.5
5
10
3.5
5
10
10
5
10
10
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
1
2.2
4.7
1
2.2
4.7
10
2.2
10
2.2
4.7
10
22
10
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
2.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
3.5
5
10
10
5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R/W
R/W
R
R
R
R/W
R
R
R
R/W
R
R/W
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
10
10
10
22
+80/-20
+80/-20
+80/-20
+80/-20
9
9
9
16
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
2.2
4.7
+80/-20
+80/-20
7
7
1.25±0.1
1.25±0.1
R/W
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
4.7
10
+80/-20
+80/-20
9
16
0.85±0.1
0.85±0.1
R
R
HALT
% Rated
voltage
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
200%
150%
150%
Internal
code
(P/N 1)
HALT
% Rated
voltage
200%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
200%
200%
200%
150%
200%
Internal
code
(P/N 1)
HALT
% Rated
voltage
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
Internal
code
(P/N 1)
Note
Note
D
D
D
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7:X7R】
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK316 B7224□L
UMK316 B7474□L
UMK316 B7105□L
UMK316 B7225□L
UMK316 B7475□L
TMK316 B7105□L
TMK316 B7225□L
TMK316 B7475□L
TMK316 B7106□L
EMK316 B7225□L
EMK316 B7106□L
LMK316 B7225□L
LMK316 B7475□L
LMK316 B7106□L
LMK316 B7226ML
JMK316 B7106□L
Part number 2
UMK316AB7475□L
TMK316AB7475□L
TMK316AB7106□L
EMK316AB7106□L
LMK316AB7106□L
LMK316AB7226ML
Note
D
D
D
D
D
R
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:F/Y5V】
・1.6mm thickness
(L)
Rated
voltage
35V
25V
16V
10V
Part number 1
GMK316
TMK316
EMK316
LMK316
Part number 2
F106ZL
F106ZL
F106ZL
F226ZL
・1.25mm thickness
(G)
Rated
voltage
Part number 1
50V
35V
UMK316 F225ZG
GMK316 F475ZG
Part number 2
・0.85mm thickness
(D)
Rated
voltage
Part number 1
10V
6.3V
LMK316 F475ZD
JMK316 F106ZD
Part number 2
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
8
11
mlcc01_e-01
■ REPRESENTATIVE PART NUMBERS
●325Type
【Temperature Characteristic BJ:B/X5R】
・2.5mm thickness
(M)
Rated
voltage
50V
25V
16V
10V
UMK325 BJ475MM
UMK325 BJ106MM
TMK325 BJ106MM
EMK325 BJ226MM
EMK325 BJ476MM
LMK325 BJ226MM
LMK325 BJ476MM
LMK325 BJ107MM
JMK325 BJ476MM
JMK325 BJ107MM
Part number 2
LMK325ABJ107MM
JMK325ABJ107MM
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
B/X5R*1
B/X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
4.7
10
10
22
47
22
47
100
47
100
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
3.5
5
10
5
10
10
10
10
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.3
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
X5R
B/X5R
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
B/X5R
B/X5R*1
B/X5R
X5R
X5R
2.2
4.7
10
3.3
4.7
10
4.7
10
22
10
22
100
47
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
3.5
10
5
3.5
3.5
5
3.5
3.5
5
3.5
5
10
10
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9+0.1/-0.2
1.9±0.2
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
10
10
22
3.3
4.7
10
±20
±20
±20
±20
±20
±20
5
5
10
3.5
5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
150%
150%
150%
200%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
150%
150%
200%
200%
200%
200%
200%
150%
200%
200%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
200%
200%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
150%
200%
150%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
Internal
code
(P/N 1)
Note
・1.9mm thickness
(Y, N)
Rated
voltage
35V
25V
16V
10V
6.3V
Part number 1
Part number 2
GMK325 BJ225MN
GMK325 BJ475MN
GMK325 BJ106MN
TMK325 BJ335MN
TMK325 BJ475MN
TMK325 BJ106MN
EMK325 BJ475MN
EMK325 BJ106MN
LMK325 BJ226MY
LMK325 BJ106MN
JMK325 BJ226MY
JMK325 BJ107MY
JMK325 BJ476MN
CAPACITORS
6.3V
Part number 1
・0.85mm thickness
(D)
Rated
voltage
25V
16V
10V
*1
Part number 1
Part number 2
TMK325 BJ106MD
EMK325 BJ106MD
EMK325 BJ226MD
LMK325 BJ335MD
LMK325 BJ475MD
LMK325 BJ106MD
We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R】
・2.5mm thickness
(M)
Rated
voltage
Part number 1
50V
25V
16V
10V
6.3V
UMK325 B7475MM
TMK325 B7226MM
EMK325 B7226MM
LMK325 B7476MM
JMK325 B7476MM
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
4.7
22
22
47
47
±20
±20
±20
±20
±20
5
10
10
10
10
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
3.3
4.7
4.7
10
10
±20
±20
±20
±20
±20
3.5
3.5
3.5
3.5
3.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
22
22
47
+80/-20
+80/-20
+80/-20
16
16
16
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
・1.9mm thickness
(Y, N)
Rated
voltage
25V
16V
10V
Part number 1
Part number 2
TMK325 B7335MN
TMK325 B7475MN
EMK325 B7475MN
EMK325 B7106MN
LMK325 B7106MN
【Temperature Characteristic F:F/Y5V】
Rated
voltage
Part number 1
16V
10V
6.3V
EMK325 F226ZN
LMK325 F226ZN
JMK325 F476ZN
Part number 2
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
11
9
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden multilayer ceramic capacitor
EMK212ABJ106KG
EMK212 BJ106KG
TMK107 BJ105KA
JMK107ABJ106MA
JMK107 BJ106MA
JMK212ABJ226MG
JMK212 BJ226MG
TMK316 BJ106KL
JMK316ABJ476ML
JMK316 BJ476ML
JMK316ABJ107ML
JMK316 BJ107ML
GMK325 BJ106MN
EMK325 BJ476MM
JMK325 BJ107MY
UMK107 F104ZA
LMK107 F105ZA
LMK107 F225ZA
UMK212 F224ZD
UMK212 F105ZG
LMK212 F106ZG
UMK316 F225ZG
GMK316 F106ZL
LMK316 F226ZL
AMK107BBJ226MA
AMK107 BJ226MA
JMK325 F476ZN
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
10
11
mlcc01_e-01
CAPACITORS
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
11
11
STANDARD MULTILAYER CERAMIC CAPACITORS
(CLASS1:TEMPERATURE COMPENSATING TYPE)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Improved higher density mounting.
◦General electronic equipment
◦Monolithic structure provides higher reliability.
◦Communication equipment
(cellular phone, wireless applications, etc.)
◦A wide range of capacitance values available in standard case sizes.
■ PART NUMBER
U M K
❶
❷
0
❸
❶Rated voltage
〔VDC〕
E
16
T
25
U
50
M
1
K
❷Series name
Multilayer ceramic
capacitor
5 △ C H
❹
❺
❸End termination
Plated
❹Dimension
Type (inch) L×W
〔mm〕
042 (01005) 0.4×0.2
063 (0201) 0.6×0.3
105 (0402) 1.0×0.5
1
0
❻
1
❼
❻Temperature characteristics〔ppm/℃〕
C□:0
CH、CJ、CK
Tolerance
R□:-220 RH
H:±60
S□:-330 SH、SJ、SK
J:±120
T□:-470 TJ、TK
K:±250
U□:-750 UJ、UK
SL:+350~-1000
□=Tolerance
V - F △
❽
❾
❽Capacitance
tolerance
C
±0.25pF
D
±0.5pF
F
±1pF
J
±5%
K
±10%
❼Nominal capacitance
〔pF〕
example
0R5
0.5
010
1
100
10
※R=decimal point
❺Dimension tolerance
△
Standard
△=Blank space
J
❿
⓫
⓬
❿Special code
- Standard
⓫Packaging
φ178mm Taping
(2mm pitch)
φ178mm Taping
W (1mm pitch, 042 Type)
F
❾Thickness〔mm〕
C
0.2
0.3
P, T
W, V
0.5
⓬Internal code
△
Standard
△=Blank space
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Type
□MK042
(01005 inch)
□MK063
(0201 inch)
□MK105
(0402 inch)
T
e
Standard quantity [pcs]
Paper tape
Embossed tape
L
W
0.4±0.02
0.2±0.02
0.2±0.02
C
0.1±0.03
-
40000
0.6±0.03
0.3±0.03
0.3±0.03
P, T
0.15±0.05
15000
-
1.0±0.05
0.5±0.05
0.5±0.05
W,V
0.25±0.10
10000
-
■ AVAILABLE CAPACITANCE RANGE
Cap
[pF]
Type
042
C□
063
C□
105
U□
VDC
16V
50V
25V
[3-digit]
0.5
0R5
1
010
1.5
1R5
2
020
P
3
030
4
040
5
050
C
T
6
060
7
070
8
080
9
090
10
100
12
120
15
150
18
180
22
220
T
27
270
33
330
39
390
C
47
470
56
560
68
680
82
820
100
101
120
121
150
151
180
181
220
221
270
271
330
331
390
391
470
471
560
561
680
681
820
821
1000
102
Note: Letters in the table indicate thickness.
C□
U□
SL
R□
S□
T□
W
W
50V
W
W
W
V
V
V
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
12
11
mlcc02_e-01
■ REPRESENTATIVE PART NUMBERS
●042TYPE
Class1【C△ characteristic】
Rated
voltage
16V
Part number 1
Part number 2
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
CAPACITORS
EMK042 CK0R5CC
EMK042 CK010CC
EMK042 CK1R5CC
EMK042 CK020CC
EMK042 CJ030CC
EMK042 CH040CC
EMK042 CH050CC
EMK042 CH060DC
EMK042 CH070DC
EMK042 CH080DC
EMK042 CH090DC
EMK042 CH100DC
EMK042 CH120JC
EMK042 CH150JC
EMK042 CH180JC
EMK042 CH220JC
EMK042 CH270JC
EMK042 CH330JC
EMK042 CH390JC
EMK042 CH470JC
EMK042 CH560JC
EMK042 CH680JC
EMK042 CH820JC
EMK042 CH101JC
Temp.
char.
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
●063TYPE
Class1【C△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK063 CK0R5CP
UMK063 CK010CP
UMK063 CK1R5CP
UMK063 CK020CP
UMK063 CJ030CP
UMK063 CH040CP
UMK063 CH050CP
UMK063 CH060DP
UMK063 CH070DP
UMK063 CH080DT
UMK063 CH090DT
UMK063 CH100DT
UMK063 CH120JT
UMK063 CH150JT
UMK063 CH180JT
UMK063 CH220JT
UMK063 CH270JT
UMK063 CH330JT
UMK063 CH390JT
UMK063 CH470JT
UMK063 CH560JT
UMK063 CH680JT
UMK063 CH820JT
UMK063 CH101JT
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Special code:G
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
Rated
voltage
25V
Part number 1
TMK063 UK0R5CT
TMK063 UK010CT
TMK063 UK1R5CT
TMK063 UK020CT
TMK063 UK030CT
TMK063 UJ040CT
TMK063 UJ050CT
TMK063 UJ060DT
TMK063 UJ070DT
TMK063 UJ080DT
TMK063 UJ090DT
TMK063 UJ100DT
TMK063 UJ120JT
TMK063 UJ150JT
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
11
13
■ REPRESENTATIVE PART NUMBERS
●105TYPE
Class1【C△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK105 CK0R5CW
UMK105 CK010CW
UMK105 CK1R5CW
UMK105 CK020CW
UMK105 CJ030CW
UMK105 CH040CW
UMK105 CH050CW
UMK105 CH060DW
UMK105 CH070DW
UMK105 CH080DV
UMK105 CH090DV
UMK105 CH100DV
UMK105 CH120JV
UMK105 CH150JV
UMK105 CH180JV
UMK105 CH220JV
UMK105 CH270JV
UMK105 CH330JV
UMK105 CH390JV
UMK105 CH470JV
UMK105 CH560JV
UMK105 CH680JV
UMK105 CH820JV
UMK105 CH101JV
UMK105 CH121JV
UMK105 CH151JV
UMK105 CH181JV
UMK105 CH221JV
UMK105 CH271JV
UMK105 CH331JV
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
Rated
voltage
50V
Part number 1
UMK105 UK0R5CW
UMK105 UK010CW
UMK105 UK1R5CW
UMK105 UK020CW
UMK105 UK030CW
UMK105 UJ040CW
UMK105 UJ050CW
UMK105 UJ060DW
UMK105 UJ070DW
UMK105 UJ080DW
UMK105 UJ090DW
UMK105 UJ100DW
UMK105 UJ120JW
UMK105 UJ150JW
UMK105 UJ180JW
UMK105 UJ220JV
UMK105 UJ270JV
UMK105 UJ330JV
UMK105 UJ390JV
UMK105 UJ470JV
UMK105 UJ560JV
UMK105 UJ680JV
UMK105 UJ820JV
UMK105 UJ101JV
UMK105 UJ121JV
UMK105 UJ151JV
UMK105 UJ181JV
UMK105 UJ221JV
UMK105 UJ271JV
UMK105 UJ331JV
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
14
11
mlcc02_e-01
■ REPRESENTATIVE PART NUMBERS
Class1【SL characteristic】
Rated
voltage
Part number 1
50V
Part number 2
UMK105 SL121JV
UMK105 SL151JV
UMK105 SL181JV
UMK105 SL221JV
UMK105 SL271JV
UMK105 SL331JV
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
SL
SL
SL
SL
SL
SL
120
150
180
220
270
330
±5%
±5%
±5%
±5%
±5%
±5%
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Internal
code
(P/N 1)
Note
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【RH characteristic】
50V
Part number 1
Part number 2
UMK105 RH5R6JW
UMK105 RH6R8JW
UMK105 RH8R2JW
UMK105 RH100JW
UMK105 RH120JW
UMK105 RH150JW
UMK105 RH180JW
UMK105 RH200JW
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
RH
RH
RH
RH
RH
RH
RH
RH
5.6
6.8
8.2
10
12
15
18
20
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
CAPACITORS
Rated
voltage
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【S△ characteristic】
Rated
voltage
50V
Part number 1
Part number 2
UMK105 SK0R5BW
UMK105 SK010BW
UMK105 SK1R2BW
UMK105 SK1R5BW
UMK105 SK1R8BW
UMK105 SK2R2JW
UMK105 SK2R7JW
UMK105 SJ3R3JW
UMK105 SJ3R9JW
UMK105 SH4R7JW
UMK105 SH5R6JW
UMK105 SH6R8JW
UMK105 SH8R2JW
UMK105 SH100JW
UMK105 SH120JW
UMK105 SH150JW
UMK105 SH180JW
UMK105 SH200JW
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
SK
SK
SK
SK
SK
SK
SK
SJ
SJ
SH
SH
SH
SH
SH
SH
SH
SH
SH
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【T△ characteristic】
Rated
voltage
50V
Part number 1
UMK105 TK0R5BW
UMK105 TK010BW
UMK105 TK1R2BW
UMK105 TK1R5BW
UMK105 TK1R8BW
UMK105 TK2R2JW
UMK105 TK2R7JW
UMK105 TK3R3JW
UMK105 TK3R9JW
UMK105 TJ4R7JW
UMK105 TJ5R6JW
UMK105 TJ6R8JW
UMK105 TJ8R2JW
UMK105 TJ100JW
UMK105 TJ120JW
UMK105 TJ150JW
UMK105 TJ180JW
UMK105 TJ200JW
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
TK
TK
TK
TK
TK
TK
TK
TK
TK
TJ
TJ
TJ
TJ
TJ
TJ
TJ
TJ
TJ
0.5
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
20
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
11
15
STANDARD MULTILAYER CERAMIC CAPACITORS
(CLASS2 :HIGH DIELECTRIC CONSTANT TYPE)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Improved higher density mounting.
◦General electronic equipment
◦Monolithic structure provides higher reliability.
◦Communication equipment
(cellular phone, wireless applications, etc.)
◦A wide range of capacitance values available in standard case sizes.
■ PART NUMBER
L M K
❶
❷
❶Rated voltage
〔VDC〕
A
4
J
6.3
L
10
E
16
T
25
G
35
U
50
1
❸
❸End termination
K
Plated
❷Series name
Multilayer ceramic
M
capacitor
0
5 △ B
❹
❺
J
1
0
❻
4
K
V - F △
❽
❾
❼
❻Temperature
characteristics code
❹Dimension
Type (inch) L×W
〔mm〕
042 (01005) 0.4×0.2
063 (0201)
0.6×0.3
105 (0402) 1.0×0.5
BJ
B
X5R
B7
X7R
❽Capacitance
tolerance
K
±10%
M
±20%
+80
Z
-20 %
F
Y5V
△F
❼Nominal capacitance
〔pF〕
example
102
1000
223
22000
⓫
⓬
❿Special code
- Standard
⓫Packaging
φ178mm Taping
(2mm pitch)
φ178mm Taping
W (1mm pitch, 042 Type)
F
△=Blank space
❺Dimension tolerance[mm]
Code Type
L
W
T
△
ALL
Standard
Standard
Standard
A
1.0±0.1
0.5±0.1
0.5±0.1
105
B
1.0+0.15/-0.05 0.5+0.15/-0.05 0.5+0.15/-0.05
△=Blank space
❿
❾Thickness〔mm〕
C
0.2
P
0.3
V
0.5
⓬Internal code
△
Standard
△=Blank space
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
□MK042
(01005 inch)
□MK063
(0201 inch)
□MK105
(0402 inch)
Dimension [mm]
T
L
W
0.4±0.02
0.2±0.02
0.6±0.03
0.3±0.03
0.5±0.05
1.0±0.05
Standard quantity [pcs]
Paper tape
Embossed tape
e
0.2±0.02
-
C
0.1±0.03
40000
0.3±0.03
P
0.15±0.05
15000
-
0.2±0.02
0.3±0.03
0.5±0.05
C
P
V
0.25±0.10
20000
15000
10000
-
-
-
■ AVAILABLE CAPACITANCE RANGE
●Multilayer Ceramic Capacitors
Type
Cap
[pF]
042
X7R B/X5R
X7R
●Low Profile Multilayer Ceramic
Capacitors
063
B/X5R
105
B/X5R
X7R
VDC
10 10 6.3 25 16 25 16 10 6.3 4
〔3-digit〕
C C
P
P
100
101
C C
P
P
150
151
C C
P
P
220
221
C C
P
P
330
331
C C
P
P
470
471
C C
P
P
680
681
C C
P
P
1000
102
C C
P P P
1500
152
C C
P P P
2200
222
C C
P P P
3300
332
C C
P P P
4700
472
C C
P P P
6800
682
C C
P P P
10000
103
15000
153
C
P P
22000
223
P P
33000
333
P P
47000
473
P P
68000
683
P P
100000
104
P P P
220000
224
P
330000
334
P
470000
474
1000000
105
2200000
225
3300000
335
4700000
475
50 25 16 10 6.3 50 35 25 16 10 6.3 4
50 25 16 10 6.3
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
BJ
B7
F
Applicable standard
JIS
EIA
EIA
JIS
EIA
B
X5R
X7R
F
Y5V
V
V
Temperature characteristics
Temperature range
〔℃〕
-25~+85
-55~+85
-55~+125
-25~+85
-30~+85
V
V
V
V
V
V
Note:Letters in the table indicate product thickness. ■■ X5R only
Temp.char.Code
F/Y5V
V
V
V
V
V
Ref. Temp.
〔℃〕
20
25
25
20
25
Cap
[pF]
105
B/X5R
Type
VDC
25 16 10 6.3
〔3-digit〕
100
101
150
151
220
221
330
331
470
471
680
681
1000
102
1500
152
2200
222
3300
332
4700
472
6800
682
P
10000
103
15000
153
22000
223
33000
333
47000
473
68000
683
P
C
100000
104
P
C
220000
224
330000
334
P
C
470000
474
P
1000000
105
2200000
225
3300000
335
4700000
475
Capacitance change
〔%〕
±10
±15
±15
+30/-80
+22/-82
Capacitance tolerance
〔%〕
±10(K)
±20(M)
+80(Z)
-20
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
16
11
mlcc03_e-01
■ REPRESENTATIVE PART NUMBERS
●042TYPE
(01005 case size)
【Temperature Characteristic BJ:B/X5R】
Rated
voltage
10V
Part number 2
LMK042 BJ101□C
LMK042 BJ151□C
LMK042 BJ221□C
LMK042 BJ331□C
LMK042 BJ471□C
LMK042 BJ681□C
LMK042 BJ102□C
LMK042 BJ152□C
LMK042 BJ222□C
LMK042 BJ332□C
LMK042 BJ472□C
LMK042 BJ682□C
LMK042 BJ103□C
JMK042 BJ152□C
JMK042 BJ222□C
JMK042 BJ332□C
JMK042 BJ472□C
JMK042 BJ682□C
JMK042 BJ103□C
JMK042 BJ223□C
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
X5R
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
150%
200%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
CAPACITORS
6.3V
Part number 1
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7S/X7R for some items according to the individual specification.
【Temperature Characteristic B7:X7R】
Rated
voltage
Part number 1
10V
Part number 2
LMK042 B7101□C
LMK042 B7151□C
LMK042 B7221□C
LMK042 B7331□C
LMK042 B7471□C
LMK042 B7681□C
LMK042 B7102□C
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
150
220
330
470
680
1000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
5
5
5
5
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
33000
47000
68000
100000
220000
22000
33000
47000
68000
100000
220000
220000
330000
470000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±20
±20
±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
5
5
5
5
5
5
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Capacitance tolerance code is applied to □ of part number.
●063TYPE
(0201 case size)
【Temperature Characteristic BJ:B/X5R】
Rated
voltage
25V
16V
10V
6.3V
4V
Part number 1
TMK063 BJ101□P
TMK063 BJ151□P
TMK063 BJ221□P
TMK063 BJ331□P
TMK063 BJ471□P
TMK063 BJ681□P
TMK063 BJ102□P
TMK063 BJ152□P
TMK063 BJ222□P
TMK063 BJ332□P
TMK063 BJ472□P
TMK063 BJ682□P
TMK063 BJ103□P
EMK063 BJ152□P
EMK063 BJ222□P
EMK063 BJ332□P
EMK063 BJ472□P
EMK063 BJ682□P
EMK063 BJ103□P
LMK063 BJ223□P
LMK063 BJ333□P
LMK063 BJ473□P
LMK063 BJ683□P
LMK063 BJ104□P
LMK063 BJ224MP
JMK063 BJ223□P
JMK063 BJ333□P
JMK063 BJ473□P
JMK063 BJ683□P
JMK063 BJ104□P
JMK063 BJ224MP
AMK063 BJ224MP
AMK063 BJ334MP
AMK063 BJ474MP
Part number 2
1
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
X5R
X5R
X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
*2
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc03_e-01
11
17
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7:X7R】
Rated
voltage
25V
16V
Part number 1
Part number 2
TMK063 B7101□P
TMK063 B7151□P
TMK063 B7221□P
TMK063 B7331□P
TMK063 B7471□P
TMK063 B7681□P
TMK063 B7102□P
EMK063 B7152□P
EMK063 B7222□P
EMK063 B7332□P
EMK063 B7472□P
EMK063 B7682□P
EMK063 B7103□P
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
B/X5R
B/X5R
X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
X5R
X5R
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
100000
15000
22000
33000
47000
100000
15000
22000
33000
47000
68000
100000
220000
1000000
100000
220000
470000
1000000
220000
470000
1000000
2200000
4700000
3300000
4700000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±20
±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
5
3.5
3.5
3.5
3.5
5
3.5
3.5
3.5
3.5
5
5
5
10
5
5
10
10
5
10
10
10
10
10
10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
150%
200%
150%
200%
200%
150%
150%
150%
200%
200%
200%
200%
200%
150%
150%
150%
200%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
Capacitance tolerance code is applied to □ of part number.
●105TYPE
(0402 case size)
【Temperature Characteristic BJ:B/X5R】
・0.5mm thickness
(V)
Rated
voltage
50V
35V
25V
16V
10V
6.3V
4V
Part number 1
UMK105 BJ221□V
UMK105 BJ331□V
UMK105 BJ471□V
UMK105 BJ681□V
UMK105 BJ102□V
UMK105 BJ152□V
UMK105 BJ222□V
UMK105 BJ332□V
UMK105 BJ472□V
UMK105 BJ682□V
UMK105 BJ103□V
GMK105 BJ104□V
TMK105 BJ153□V
TMK105 BJ223□V
TMK105 BJ333□V
TMK105 BJ473□V
TMK105 BJ104□V
EMK105 BJ153□V
EMK105 BJ223□V
EMK105 BJ333□V
EMK105 BJ473□V
EMK105 BJ683□V
EMK105 BJ104□V
EMK105 BJ224□V
EMK105 BJ105□V
LMK105 BJ104□V
LMK105 BJ224□V
LMK105 BJ474□V
LMK105 BJ105□V
JMK105 BJ224□V
JMK105 BJ474□V
JMK105 BJ105□V
JMK105 BJ225MV
JMK105 BJ475MV
AMK105 BJ335MV
AMK105 BJ475MV
Part number 2
JMK105BBJ475MV
AMK105ABJ475MV
D
*2
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
18
11
mlcc03_e-01
■ REPRESENTATIVE PART NUMBERS
・0.3mm thickness
(P)
Rated
voltage
25V
16V
6.3V
Part number 1
Part number 2
TMK105 BJ103□P
TMK105 BJ104□P
TMK105 BJ224□P
EMK105 BJ474□P
JMK105 BJ105□P
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
X5R
X5R
X5R
X5R
10000
100000
220000
470000
1000000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
10
10
10
10
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
X5R
100000
220000
470000
±10, ±20
±10, ±20
±10, ±20
10
10
10
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
47000
100000
22000
47000
100000
220000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
5
3.5
3.5
5
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
10000
22000
47000
100000
220000
470000
1000000
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
5
5
7
9
11
12.5
20
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
200%
200%
200%
200%
200%
200%
200%
200%
150%
200%
200%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
150%
Internal
code
(P/N 1)
Note
・0.2mm thickness
(C)
Rated
voltage
Part number 2
LMK105 BJ104□C
JMK105 BJ224□C
JMK105 BJ474□C
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7:X7R】
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
Part number 2
UMK105 B7221□V
UMK105 B7331□V
UMK105 B7471□V
UMK105 B7681□V
UMK105 B7102□V
UMK105 B7152□V
UMK105 B7222□V
UMK105 B7332□V
UMK105 B7472□V
UMK105 B7682□V
UMK105 B7103□V
TMK105 B7152□V
TMK105 B7222□V
TMK105 B7332□V
TMK105 B7472□V
TMK105 B7682□V
TMK105 B7103□V
EMK105 B7223□V
EMK105 B7473□V
EMK105 B7104□V
LMK105 B7223□V
LMK105 B7473□V
LMK105 B7104□V
JMK105 B7224□V
CAPACITORS
10V
6.3V
Part number 1
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:Y5V】
Rated
voltage
50V
25V
16V
10V
6.3V
Part number 1
UMK105
TMK105
EMK105
EMK105
LMK105
JMK105
JMK105
F103ZV
F223ZV
F473ZV
F104ZV
F224ZV
F474ZV
F105ZV
Part number 2
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc03_e-01
11
19
MULTILAYER CERAMIC CAPACITORS
FOR HIGH FREQUENCY APPLICATIONS(1GHz+)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Q value in the high frequency range (1 GHz+) is superior compared to
other types of multilayer capacitors.
◦Suitable for those high frequency applications in which a capacitor
with both a high Q-value and small size is required such as portable
communications and other wireless applications.
VCO, TCXO etc.
◦The 1005(0402) case size is designed for high density mounting and
weight reduction in various applications.
◦Adjustment of characteristics in high frequency circuit
■ PART NUMBER
U
V
K
❶
❷
❸
❶Rated voltage
〔VDC〕
E
16
U
50
V
1
❹
❸End termination
K
Plated
❷Series name
Multilayer ceramic
capacitor for high
frequency
5 △ R H
0
❺
4
R
❻
J W - F △
3
❼
❺Dimension
tolerance
△
Standard
△=Blank Space
❻Temperature
❹Dimension
Type (inch) L×W〔mm〕 characteristics〔ppm/℃〕
0±60
CH
105 (0402) 1.0×0.5
-220±60
RH
❼Nominal
capacitance〔pF〕
example
020
2
4R3
4.3
※R=Decimal point
❽
❽Capacitance
tolerance
B
±0.1pF
J
±5%
❾
❿
⓫
❿Special code
- Standard
❾Thickness〔mm〕
W
0.5
F
⓬
⓬ Internal code
△ Standard
△=Blank Space
⓫Packaging
φ178mm Taping
(2mm pitch)
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Type
□VK105
(0402 inch)
L
W
T
e
1.0±0.05
0.5±0.05
0.5±0.05
0.25±0.1
Standard quantity [pcs]
Paper tape
Embossed tape
10000
-
■ SPECIFICATIONS
Temperature
Characteristics
Operating
Temperature range
CH
RH
-55~+125℃
Temperature
Coefficient range
[ppm/℃]
0±60
-220±60
Capacitance
Tolerance
●Capacitance vs Q value(Typical for CH characteristic)
±0.1pF
(~2.0pF)
±5%(2.2pF~)
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
20
11
mlcc04_e-01
■ PART NUMBERS
Rated Voltage
(DC)
Part number
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Capacitance
〔pF〕
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
Capacitance
tolerance
±0.1pF
±5%
±0.1pF
±5%
Q
(at 1GHz)
(min.)
300
300
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
84
84
84
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
84
84
84
Thickness
[mm]
Typical Q
0.5±0.05
1200
1200
1200
1100
1100
1000
950
950
930
850
740
710
670
650
610
530
510
460
390
370
360
360
360
340
320
1100
1000
1000
970
950
900
900
740
700
680
640
620
570
480
470
420
360
350
340
340
340
320
310
CAPACITORS
□VK105 CH0R3BW
□VK105 CH0R4BW
□VK105 CH0R5BW
□VK105 CH0R6BW
□VK105 CH0R7BW
□VK105 CH0R8BW
□VK105 CH0R9BW
□VK105 CH010BW
□VK105 CH1R1BW
□VK105 CH1R2BW
□VK105 CH1R3BW
□VK105 CH1R5BW
□VK105 CH1R6BW
□VK105 CH1R8BW
□VK105 CH020BW
□VK105 CH2R2JW
□VK105 CH2R4JW
□VK105 CH2R7JW
□VK105 CH030JW
□VK105 CH3R3JW
□VK105 CH3R6JW
□VK105 CH3R9JW
□VK105 CH4R3JW
□VK105 CH4R7JW
E: 16V
U: 50V
□VK105 CH5R1JW
□VK105 RH0R5BW
□VK105 RH0R6BW
□VK105 RH0R7BW
□VK105 RH0R8BW
□VK105 RH0R9BW
□VK105 RH010BW
□VK105 RH1R1BW
□VK105 RH1R2BW
□VK105 RH1R3BW
□VK105 RH1R5BW
□VK105 RH1R6BW
□VK105 RH1R8BW
□VK105 RH020BW
□VK105 RH2R2JW
□VK105 RH2R4JW
□VK105 RH2R7JW
□VK105 RH030JW
□VK105 RH3R3JW
□VK105 RH3R6JW
□VK105 RH3R9JW
□VK105 RH4R3JW
□VK105 RH4R7JW
□VK105 RH5R1JW
□Please specify the Rated Voltage code.
Temperature
EHS
(Environmental characteristics
Hazardous
CH
RH
Substances)
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc04_e-01
11
21
SUPER LOW DISTORTION MULTILAYER
CERAMIC CAPACITORS(CFCAPTM)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Newly developed dielectric material and the use of nickel for internal
electrodes provide superior temperature characteristics with high capacitance, small case size and low cost.
◦Signal line for AV products
◦Analog signal coupling applications
◦PLL circuit of mobile phones
◦Low distortion and low shock noise make these capacitors appropriate for use in analog or digital mobile devices.
◦Good temperature characteristics for time constant circuits, oscillation circuits and filters
◦Superior heat-resistance, high breakdown voltage, and mechanical
strength make these capacitors appropriate for replacing film capacitors.
■ PART NUMBER
T M K
❶
❷
3
❸
❶Rated
voltage〔VDC〕
U
50
G
35
T
25
E
16
L
10
M
J
6.3
❸End termination
K
Plated
❷Series name
Multilayer ceramic
capacitor
1
6 △ S
❹
❺
Type
105
107
212
316
△
D
1
0
❻
❹Dimension
(inch) L×W〔mm〕
(0402) 1.0×0.5
(0603) 1.6×0.8
(0805) 2.0×1.25
(1206) 3.2×1.6
❼
❻Series symbol
SD Standard
❼Nominal
capacitance〔μF〕
example
223
0.022
104
0.1
❺Dimension tolerance
Standard
4
❽Capacitance
tolerance
K
±10%
△=Blank space
K
L - T △
❽
❾
❾Thickness
〔mm〕
P
0.3
V
0.5
A
0.8
D
0.85
F
1.15
G
1.25
L
1.6
❿
⓫
❿Special code
- Standard
⓬
⓬Internal code
△ Standard
△=Blank space
⓫Packaging
φ178mm Taping
(4mm pitch)
107, 212, 316 Type
φ178mm Taping
(2mm pitch)
105 Type
T
F
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Type
L
W
□MK105
(0402 inch)
1.0±0.05
0.5±0.05
□MK107
(0603 inch)
1.6±0.10
0.8±0.10
□MK212
(0805 inch)
2.0±0.10
1.25±0.10
□MK316
(1206 inch)
3.2±0.15
1.6±0.15
T
0.3±0.03
0.5±0.05
Standard quantity [pcs]
Paper tape
Embossed tape
e
P
V
0.25±0.10
0.8±0.10
A
0.35±0.25
4000
-
0.85±0.10
1.25±0.10
1.15±0.10
1.6±0.20
D
G
F
L
0.5±0.25
4000
-
0.5 +0.35/ー0.25
-
-
3000
3000
2000
-
10000
■ AVAILABLE CAPACITANCE RANGE
Cap
[pF]
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
39000
47000
56000
68000
82000
100000
Type
VDC
[3-digit]
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
50V
25V
105
SD
16V
107
SD
10V
6.3V
50V
25V
212
SD
16V
10V
50V
35V
316
SD
16V
10V
35V
25V
V
V
V
V
V
V
V
V
V
V
V
P
P
V
V
V
A
A
A
A
A
A
A
A
A
D
D
D
D
D
D
A
A
A
A
A
A
A
A
D
D
G
G
G
D
F
F
D
G
G
G
※Letters in the table indicate thickness.
F
F
F
L
L
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
22
11
mlcc05_e-01
■ REPRESENTATIVE PART NUMBERS
●105TYPE
・0.5mm thickness
(V)
Rated
voltage
Part number 1
50V
Part number 2
25V
16V
10V
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
1500
2700
±10
±10
0.1
0.1
0.3±0.03
0.3±0.03
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
・0.3mm thickness
(P)
Rated
voltage
Part number 1
10V
6.3V
LMK105 SD152KP
JMK105 SD272KP
Part number 2
CAPACITORS
UMK105 SD391KV
UMK105 SD471KV
UMK105 SD561KV
TMK105 SD681KV
TMK105 SD821KV
TMK105 SD102KV
TMK105 SD122KV
EMK105 SD152KV
EMK105 SD182KV
EMK105 SD222KV
EMK105 SD272KV
LMK105 SD332KV
LMK105 SD392KV
LMK105 SD472KV
Temp.
char.
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
●107TYPE
Rated
voltage
Part number 1
50V
Part number 2
UMK107 SD102KA
UMK107 SD122KA
UMK107 SD152KA
UMK107 SD182KA
UMK107 SD222KA
UMK107 SD272KA
UMK107 SD332KA
TMK107 SD392KA
TMK107 SD472KA
EMK107 SD562KA
EMK107 SD682KA
EMK107 SD822KA
EMK107 SD103KA
LMK107 SD123KA
LMK107 SD153KA
LMK107 SD183KA
LMK107 SD223KA
25V
16V
10V
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
●212TYPE
・1.25mm thickness
(G)
Rated
voltage
35V
10V
Part number 1
Part number 2
GMK212 SD183KG
GMK212 SD223KG
GMK212 SD273KG
LMK212 SD683KG
LMK212 SD823KG
LMK212 SD104KG
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
18000
22000
27000
68000
82000
100000
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
3900
4700
5600
6800
8200
10000
12000
15000
33000
47000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
・0.85mm thickness
(D)
Rated
voltage
50V
35V
16V
10V
Part number 1
UMK212 SD392KD
UMK212 SD472KD
UMK212 SD562KD
UMK212 SD682KD
UMK212 SD822KD
UMK212 SD103KD
GMK212 SD123KD
GMK212 SD153KD
EMK212 SD333KD
LMK212 SD473KD
Part number 2
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
11
23
■ REPRESENTATIVE PART NUMBERS
●316TYPE
・1.6mm thickness
(L)
Rated
voltage
Part number 1
25V
TMK316 SD823KL
TMK316 SD104KL
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
82000
100000
±10
±10
0.1
0.1
1.6±0.2
1.6±0.2
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
Standard
type
33000
39000
47000
56000
68000
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
・1.15mm thickness
(F)
Rated
voltage
35V
25V
Part number 1
Part number 2
GMK316 SD333KF
GMK316 SD393KF
TMK316 SD473KF
TMK316 SD563KF
TMK316 SD683KF
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
■ ELECTRICAL CHARACTERISTICS
■ Capacitance-temperature characteristics
20
15
SD : Standard Type
10
5
0
-5
-10
-15
-20
-60
-40 -20
0
20
40
60
80
100
120
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
24
11
mlcc05_e-01
CAPACITORS
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
11
25
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic
Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors(CFCAP)
1. Operating Temperature Range
Specified Value
-55 to +125℃
2. Storage Temperature Range
Specified Value
-55 to +125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
(Between terminals)
4. Dielectric Withstanding Voltage
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage×3
Duration: 1 to 5 sec.
Charge/discharge current: 50mA max.
5.Insulation Resistance
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6.Capacitance(Tolerance)
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application: None
7.Dissipation Factor
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application: None
No breakdown or damage
10000 MΩ or 500MΩμF, whichever is smaller
±10%
0.1%max
8.Bending Strength
Appearance: No abnormality
Capacitance change: ±5%
Specified Value
【Test Methods and Remarks】
Warp: 1mm
Speed: 0.5mm/second
Duration:10 seconds
Test board: glass epoxy resin substrate
Thickness: 1.6mm
Capacitance measurement shall be conducted with the board bent.
9.Adhesive Force of Terminal Electrodes
Specified Value
【Test Methods and Remarks】
Applied force: 5N
Duration: 30 ±5 seconds
10.Solderability
Specified Value
【Test Methods and Remarks】
Eutectic solder
Lead-free solder
Solder type
H60A or H63A
Snー3.0Agー0.5Cu
R-230
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
At least 95% of terminal electrode is covered by new solder.
Solder temperature
230±5℃
245±3℃
Duration
4±1 sec.
11.Resistance to Soldering Heat
Specified Value
Appearance: No abnormality
Capacitance change: ±2.5% max.
Dissipation factor : Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
【Test Methods and Remarks】
Solder temp.: 270 ±5℃
Duration: 3 ±0.5 sec.
Preheating conditions:80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
Measurement shall be conducted : 24±2hrs under the standard condition
Note1
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli-R1
11
mlcc05_reli_e-01
■ RELIABILITY DATA
12.Temperature Cycle
(Thermal Shock)
Specified Value
Appearance: No abnormality
Capacitance change: ±2.5% max
Dissipation factor : Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
【Test Methods and Remarks】
+0
Conditions for 1 cycle/ Step 1: Minimum operating temperature -3℃ 30±3 min.
Step 2: Normal temperature
2 to 3 min.
+0
Step 3: Maximum operating temperature -3℃ 30±3 min.
Step 4: Normal temperature
2 to 3 min.
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition
Note1
13.Humidity(Steady state)
Specified Value
Appearance: No abnormality
Capacitance change: ±5% max
Dissipation factor : 0.5% max
Insulation resistance 50MΩμF or 1000MΩ, whichever is smaller
【Test Methods and Remarks】
Temperature:40±2℃
Humidity:90 to 95% RH
+24
Duration:500 -0 hrs
Measurement shall be conducted : 24 ±2hrs under the standard condition
Note1
14.Humidity Loading
Specified Value
Appearance: No abnormality
Capacitance change: ±7.5% max
Dissipation factor : 0.5% max
Insulation resistance: 25MΩμF or 500MΩ, whichever is smaller
【Test Methods and Remarks】
According to JIS C 5102 clause 9.9.
Temperature:40±2℃ Humidity:90 to 95% RH
+24
Duration:500 -0 hrs
Applied voltage: Rated voltage
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition
Note1
15.High Temperature Loading
Specified Value
Appearance: No abnormality
Capacitance change: ±3% max
Dissipation factor : 0.35% max
Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller
【Test Methods and Remarks】
According to JIS C 5102 clause 9.10.
Temperature:125±3℃
+48
Duration:1000 -0 hrs
Applied voltage: Rated voltage x 2
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition
Note1
Note1
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli_e-01
11
mlcc05_reli-R2
MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦The use of nickel as electrode material prevents migration and provides high reliability.
◦General telephone exchange
◦Inverter
◦Small case sizes with high rated voltage.
◦Wireless and Telecommunication base
◦For DC/DC Converter
■ PART NUMBER
H M K
❶
❷
❶Rated
voltage〔VDC〕
H
100
Q
250
S
630
3
❸
❸End
termination
K
Plated
❷Series name
Multilayer ceramic
M
capacitor
1
6 △ B
❹
❺
Type
107
212
316
325
432
❹Dimension
(inch) L×W[mm]
(0603) 1.6×0.8
(0805) 2.0×1.25
(1206) 3.2×1.6
(1210) 3.2×2.5
(1812) 4.5×3.2
J
1
0
❻
4
❼
❻Temperature
characteristics code
B
BJ
X5R
C7
X7S
B7
X7R
❺Dimension
tolerance
△
Standard
△=Blank space
K
L - T △
❽
❾
❾Thickness
〔mm〕
A
0.8
D
0.85
G
1.25
F
1.15
L
1.6
N
1.9
M
2.5
❽Special code
K
±10%
M
±20%
❼Nominal
capacitance〔pF〕
example
104
100,000
105
1,000,000
❿
⓫
⓬
⓬Internal code
△ Standard
△=Blank space
❿Special code
- Standard
⓫Packaging
φ178mm Taping
(4mm pitch)
T
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Type
□MK107
(0603 inch)
L
W
T
1.6±0.10
0.8±0.10
□MK212
(0805 inch)
2.0±0.10
1.25±0.10
□MK316
(1206 inch)
3.2±0.15
1.6±0.15
□MK325
(1210 inch)
3.2±0.3
2.5±0.20
□MK432
(1812 inch)
4.5±0.4
3.2±0.30
Standard quantity [pcs]
Paper tape
Embossed tape
e
0.8±0.10
A
0.85±0.10
1.25±0.10
1.15±0.10
1.6±0.20
1.15±0.10
1.9±0.20
D
G
F
L
F
N
2.5±0.20
M
0.35±0.25
4000
-
0.5±0.25
4000
-
0.5 +0.35/ー0.25
-
-
3000
3000
2000
0.6±0.3
-
2000
0.9±0.6
-
500
■ AVAILABLE CAPACITANCE RANGE
Cap
[μF]
Type
X7R
100
107
212
X7R
B/X5R
X7S B/X5R
100 100 100 250 100 250
VDC
[3-digit]
0.001
102
A
A
0.0015
152
A
A
0.0022
222
A
A
0.0033
332
A
A
0.0047
472
A
A
0.0068
682
A
A
0.01
103
A
A
0.015
153
A
A
0.022
223
A
A
0.033
333
A
A
0.047
473
0.068
683
0.1
104
A
A
0.15
154
0.22
224
0.33
334
0.47
474
0.68
684
1.0
105
1.5
155
2.2
225
※Letters in the table indicate thickness.
G
G
G
G
G
G
G
G
D
D
D
D
G
G
G
G
G
G
G
G
G
G
G
G
G
316
100
X7R
250
D
D
D
D
G
G
G
G
G
630
325
B/X5R
100 250 630
F
F
F
F
F
F
F
L
L
L
L
L
L
L
L
L
L
L
L
L
L
100
X7R
250
630
N
N
N
N
F
F
F
F
F
F
F
L
L
L
L
L
L
L
L
L
L
L
L
L
L
F
N
N
N
N
N
N
N
N
N
N
432
B/X5R
100 250 630
N
F
N
N
N
N
N
N
N
100
X7R
250
630
M
M
M
M
N
N
N
N
N
N
M
100
M
M
M
M
M
M
B/X5R
250 630
M
M
M
M
M
M
M
M
M
M
M
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
26
11
mlcc06_e-01
■ AVAILABLE CAPACITANCE RANGE
Temp.char.Code
Applicable standard
JIS
EIA
EIA
EIA
BJ
C7
B7
B
X5R
X7S
X7R
Temperature characteristics
Temperature range
〔℃〕
-25~+85
-55~+85
-55~+125
-55~+125
Ref. Temp.
〔℃〕
20
25
25
25
Capacitance change
〔%〕
±10
±15
±22
±15
Capacitance tolerance
〔%〕
±10
(K)
±20
(M)
■ REPRESENTATIVE PART NUMBERS
●107TYPE
【Temperature Characteristic BJ:B/X5R】
100V
Part number 1
Part number 2
HMK107 BJ102□A
HMK107 BJ152□A
HMK107 BJ222□A
HMK107 BJ332□A
HMK107 BJ472□A
HMK107 BJ682□A
HMK107 BJ103□A
HMK107 BJ153□A
HMK107 BJ223□A
HMK107 BJ333□A
HMK107 BJ104□A
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
1000
1500
2200
3300
4700
6800
10000
15000
22000
33000
100000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
CAPACITORS
Rated
voltage
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic
Rated
voltage
100V
B7:X7R, C7:X7S】
Part number 1
Part number 2
HMK107 B7102□A
HMK107 B7152□A
HMK107 B7222□A
HMK107 B7332□A
HMK107 B7472□A
HMK107 B7682□A
HMK107 B7103□A
HMK107 B7153□A
HMK107 B7223□A
HMK107 B7333□A
HMK107 C7104□A
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
1000
1500
2200
3300
4700
6800
10000
15000
22000
33000
100000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
10000
15000
22000
33000
47000
68000
100000
220000
4700
6800
10000
15000
22000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
1000
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
Capacitance tolerance code is applied to □ of part number.
●212TYPE
【Temperature Characteristic
・1.25mm thickness
(G)
Rated
voltage
100V
250V
BJ:B/X5R】
Part number 1
Part number 2
HMK212 BJ103□G
HMK212 BJ153□G
HMK212 BJ223□G
HMK212 BJ333□G
HMK212 BJ473□G
HMK212 BJ683□G
HMK212 BJ104□G
HMK212 BJ224□G
QMK212 BJ472□G
QMK212 BJ682□G
QMK212 BJ103□G
QMK212 BJ153□G
QMK212 BJ223□G
・0.85mm thickness
(D)
Rated
voltage
250V
Part number 1
QMK212 BJ102□D
QMK212 BJ152□D
QMK212 BJ222□D
QMK212 BJ332□D
Part number 2
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
11
27
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic
・1.25mm thickness
(G)
Rated
voltage
100V
250V
B7:X7R】
Part number 1
Part number 2
HMK212 B7103□G
HMK212 B7153□G
HMK212 B7223□G
HMK212 B7333□G
HMK212 B7473□G
HMK212 B7683□G
HMK212 B7104□G
HMK212 B7224□G
QMK212 B7472□G
QMK212 B7682□G
QMK212 B7103□G
QMK212 B7153□G
QMK212 B7223□G
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
10000
15000
22000
33000
47000
68000
100000
220000
4700
6800
10000
15000
22000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
1000
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
47000
68000
100000
150000
220000
330000
470000
1000000
33000
47000
68000
100000
15000
22000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
1000
1500
2200
3300
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
120%
120%
120%
120%
120%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
Internal
code
(P/N 1)
Note
・0.85mm thickness
(D)
Rated
voltage
250V
Part number 1
Part number 2
QMK212 B7102□D
QMK212 B7152□D
QMK212 B7222□D
QMK212 B7332□D
Capacitance tolerance code is applied to □ of part number.
●316TYPE
【Temperature Characteristic
・1.6mm thickness
(L)
Rated
voltage
100V
250V
630V
BJ:B/X5R】
Part number 1
Part number 2
1
HMK316 BJ473□L
HMK316 BJ683□L
HMK316 BJ104□L
HMK316 BJ154□L
HMK316 BJ224□L
HMK316 BJ334□L
HMK316 BJ474□L
HMK316 BJ105□L
QMK316 BJ333□L
QMK316 BJ473□L
QMK316 BJ683□L
QMK316 BJ104□L
SMK316 BJ153□L
SMK316 BJ223□L
・1.15mm thickness
(F)
Rated
voltage
630V
Part number 1
Part number 2
1
SMK316 BJ102□F
SMK316 BJ152□F
SMK316 BJ222□F
SMK316 BJ332□F
SMK316 BJ472□F
SMK316 BJ682□F
SMK316 BJ103□F
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic
・1.6mm thickness
(L)
Rated
voltage
100V
250V
630V
B7:X7R】
Part number 1
HMK316 B7473□L
HMK316 B7683□L
HMK316 B7104□L
HMK316 B7154□L
HMK316 B7224□L
HMK316 B7334□L
HMK316 B7474□L
HMK316 B7105□L
QMK316 B7333□L
QMK316 B7473□L
QMK316 B7683□L
QMK316 B7104□L
SMK316 B7153□L
SMK316 B7223□L
Part number 2
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
47000
68000
100000
150000
220000
330000
470000
1000000
33000
47000
68000
100000
15000
22000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
28
11
mlcc06_e-01
■ REPRESENTATIVE PART NUMBERS
・1.15mm thickness
(F)
Rated
voltage
Part number 1
630V
Part number 2
SMK316 B7102□F
SMK316 B7152□F
SMK316 B7222□F
SMK316 B7332□F
SMK316 B7472□F
SMK316 B7682□F
SMK316 B7103□F
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1000
1500
2200
3300
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
150000
220000
330000
470000
680000
1000000
2200000
47000
100000
150000
220000
22000
33000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
100000
±10, ±20
3.5
1.15±0.1
R
HALT
% Rated
voltage
120%
120%
120%
120%
120%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
Internal
code
(P/N 1)
Note
Capacitance tolerance code is applied to □ of part number.
Rated
voltage
100V
250V
630V
BJ:B/X5R】
Part number 1
Part number 2
1
HMK325 BJ154□N
HMK325 BJ224□N
HMK325 BJ334□N
HMK325 BJ474□N
HMK325 BJ684□N
HMK325 BJ105□N
HMK325 BJ225□N
QMK325 BJ473□N
QMK325 BJ104□N
QMK325 BJ154□N
QMK325 BJ224□N
SMK325 BJ223□N
SMK325 BJ333□N
SMK325 BJ473□N
CAPACITORS
●325TYPE
【Temperature Characteristic
・1.9mm thickness
(N)
・1.15mm thickness
(F)
Rated
voltage
Part number 1
100V
Part number 2
HMK325 BJ104□F
B/X5R*
1
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic
・1.9mm thickness
(N)
Rated
voltage
100V
250V
630V
B7:X7R】
Part number 1
Part number 2
HMK325 B7154□N
HMK325 B7224□N
HMK325 B7334□N
HMK325 B7474□N
HMK325 B7684□N
HMK325 B7105□N
HMK325 B7225□N
QMK325 B7473□N
QMK325 B7104□N
QMK325 B7154□N
QMK325 B7224□N
SMK325 B7223□N
SMK325 B7333□N
SMK325 B7473□N
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
150000
220000
330000
470000
680000
1000000
2200000
47000
100000
150000
220000
22000
33000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
100000
±10, ±20
3.5
1.15±0.1
R
・1.15mm thickness
(F)
Rated
voltage
Part number 1
100V
HMK325 B7104□F
Part number 2
Capacitance tolerance code is applied to □ of part number.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
11
29
■ REPRESENTATIVE PART NUMBERS
●432TYPE
【Temperature Characteristic
Rated
voltage
100V
250V
630V
BJ:B/X5R】
Part number 1
Temp.
char.
Part number 2
1
HMK432 BJ474□M
HMK432 BJ105□M
HMK432 BJ155□M
HMK432 BJ225□M
QMK432 BJ104□M
QMK432 BJ224□M
QMK432 BJ334□M
QMK432 BJ474□M
SMK432 BJ473□M
SMK432 BJ683□M
SMK432 BJ104□M
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
470000
1000000
1500000
2200000
100000
220000
330000
470000
47000
68000
100000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
Internal
code
(P/N 1)
Note
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic
Rated
voltage
100V
250V
630V
B7:X7R】
Part number 1
Part number 2
HMK432 B7474□M
HMK432 B7105□M
HMK432 B7155□M
HMK432 B7225□M
QMK432 B7104□M
QMK432 B7224□M
QMK432 B7334□M
QMK432 B7474□M
SMK432 B7473□M
SMK432 B7683□M
SMK432 B7104□M
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
〔%〕
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
470000
1000000
1500000
2200000
100000
220000
330000
470000
47000
68000
100000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
R
R
R
R
Capacitance tolerance code is applied to □ of part number.
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden medium-high voltage ceramic capacitor
HMK212 BJ104KG / HMK212 B7104KG
SMK316 BJ223KL / SMK316 B7223KL
SMK432 BJ104KM / SMK432 B7104KM
QMK432 BJ474KM / QMK432 B7474KM
QMK325 BJ224KN / QMK325 B7224KN
HMK325 BJ105KN / HMK325 B7105KN
●Temperature characteristics
HMK325 BJ105KN / HMK325 B7105KN
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
30
11
mlcc06_e-01
CAPACITORS
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
11
31
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Super Low Distortion Multilayer Ceramic
Capacitors are noted separately.
MediumーHigh Voltage Multilayer Ceramic Capacitor
1. Operating Temperature Range
Specified Value
X7R, X7S:-55~+125℃ X5R:-55~+85℃ B:-25~+85℃
2. Storage Temperature Range
Specified Value
X7R, X7S:-55~+125℃ X5R:-55~+85℃ B:-25~+85℃
3. Rated Voltage
Specified Value
100VDC, 250VDC, 630VDC
(Between terminals)
4. Withstanding Voltage
Specified Value
No breakdown or damage
【Test Methods and Remarks】
Applied voltage:Rated voltage×2.5
(HMK)
, Rated voltage×2
(QMK)
, Rated voltage×1.2
(SMK)
Duration:1 to 5sec.
Charge/discharge current:50mA max.
5.Insulation Resistance
Specified Value
【Test Methods and Remarks】
Applied voltage:Rated voltage
(HMK, QMK)
, 500V
(SMK)
Duration:60±5sec.
Charge/discharge current:50mA max.
6.Capacitance
(Tolerance)
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
100MΩμF or 10GΩ, whichever is smaller.
±10%、±20%
7.Dissipation Factor
3.5%max
(HMK)
2.5%max
(QMK, SMK)
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
8.Temperature Characteristic of Capacitance
B: ±10%(-25~+85℃)
X5R:±15%(-55~+85℃)
X7R:±15%(-55~+125℃)
X7S:±22%(-55~+125℃)
Specified Value
【Test Methods and Remarks】
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
Step
1
2
3
(C-C2)
×100
(%)
C2
B
X5R、X7R、X7S
Minimum operating temperature
20℃
25℃
Maximum operating temperature
C :Capacitance value in Step 1 or Step 3
C2 :Capacitance value in Step 2
9.Deflection
Appearance:No abnormality
Capacitance change:Within±10%
Specified Value
【Test Methods and Remarks】
Warp:1mm
Duration:10sec.
Test board:glass epoxy-resin substrate
Thickness:1.6mm
Capacitance measurement shall be conducted with the board bent.
10.Adhesive Strength of Terminal Electrodes
Specified Value
【Test Methods and Remarks】
Applied force:5N
Duration:30±5sec.
11.Solderability
Specified Value
【Test Methods and Remarks】
Eutectic solder
Lead-free solder
Solder type
H60A or H63A
Snー3.0Agー0.5Cu
R-230
No terminal separation or its indication.
At least 95% of terminal electrode is covered by new solder
Solder temperature
230±5℃
245±3℃
Duration
4±1 sec.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli-R1
11
mlcc06_reli_e-01
■ RELIABILITY DATA
12.Resistance to Soldering
Appearance:
No abnormality
Capacitance change:
Within±15%
(HMK)
, ±10%
(QMK, SMK)
Dissipation factor :
Initial value
Insulation resistance:
Initial value
Withstanding voltage
(between terminals)
: No abnormality
Specified Value
【Test Methods and Remarks】
Preconditioning:Thermal treatment
(at 150℃ for 1hr) Note1
Solder temperature:270±5℃
Duration:3±0.5sec.
Preheating conditions: 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
Recovery : 24±2hrs under the standard condition Note3
(Thermal Shock)
13.Temperature Cycle
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
Specified Value
【Test Methods and Remarks】
Preconditioning:Thermal treatment
(at 150℃ for 1hr) Note1
Conditions for 1 cycle/ Step 1: Minimum operating temperature
Step 2: Normal temperature
Step 3: Maximum operating temperature
Step 4: Normal temperature
Number of cycles:5 times
Recovery : 24±2hrs under the standard condition Note3
+0
-3℃
+0
-3℃
No abnormality
Within±15%
(HMK)
, ±7.5%
(QMK, SMK)
Initial value
Initial value
30±3min.
2 to 3min.
30±3min.
2 to 3min.
14.Humidity
(Steady state)
Specified Value
Appearance:
Capacitance change:
Dissipation factor :
Insulation resistance:
No abnormality
Within±15%
7%max
(HMK)
, 5%max
(QMK, SMK)
.
25MΩμF or 1000MΩ, whichever is smaller.
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
No abnormality
Within±15%
7%max
(HMK)
, 5%max
(QMK, SMK)
.
10MΩμF or 500MΩ, whichever is smaller.
Appearance:
Capacitance change:
Dissipation factor:
Insulation resistance:
No abnormality
Within±15%
7%max
(HMK)
, 5%max
(QMK, SMK)
.
50MΩμF or 1000MΩ, whichever is smaller.
【Test Methods and Remarks】
Preconditioning:Thermal treatment
(at 150℃ for 1hr) Note1
Temperature:40±2℃
Humidity:90 to 95%RH
+24
Duration: 500 -0 hrs
Recovery : 24±2hrs under the standard condition Note3
15.Humidity Loading
Specified Value
【Test Methods and Remarks】
According to JIS 5102 clause 9.9.
Preconditioning:Voltage treatment Note2
Temperature:40±2℃
Humidity:90 to 95%RH
Applied voltage:Rated voltage
Charge/discharge current:50mA max.
+24
Duration: 500 -0 hrs
Recovery : 24±2hrs under the standard condition
Note3
16.High Temperature Loading
Specified Value
【Test Methods and Remarks】
According to JIS 5102 clause 9.10.
Preconditioning:Voltage treatment Note2
Temperature:125±3℃(B7, C7)
, 85±2℃
(BJ)
Applied voltage:Rated voltage×2
(HMK)
Rated voltage×1.5
(QMK)
Rated voltage×1.2
(SMK)
Charge/discharge current:50mA max.
+24
Duration: 1000 -0 hrs
Recovery : 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Note3 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli_e-01
11
mlcc06_reli-R2
LW REVERSAL DECOUPLING CAPACITORS(LWDCTM)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Low equivalent series resistance(ESR).
◦Decoupling capacitors
◦Low equivalent series inductor(ESL).
◦Filtering capacitors
◦The effect of noise removal in the high frequency.
◦Decreased ripple voltage.
◦Small size with high capacitance.
■ PART NUMBER
J W K
❶
❷
2
❸
❶Rated
voltage〔VDC〕
A
4
J
6.3
L
10
E
16
T
25
❸End
termination
K
Plated
W
Type
105
107
212
❷Series name
LW Reverse Type
1
2 △ B
❹
❺
J
1
❻
❹Dimension
(inch) L×W
〔mm〕
(0204) 0.52×1.0
(0306) 0.8×1.6
(0508) 1.25×2.0
❺Dimension tolerance
△
Standard
△=Blank space
6 M D - T △
0
❼
❽
❿
⓫
⓬
⓬Internal code
△ Standard
△=Blank space
❿Special code
- Standard
❾Thickness
〔mm〕
P
0.3
V
0.5
D
0.85
❽Capacitance
tolerance
K
±10%
M
±20%
❻Temperature
characteristics
code
B
BJ
X5R
C6
X6S
C7
X7S
B7
X7R
❾
⓫Packaging
φ178mm Taping
F (2mm pitch)
0204 Type
φ178mm Taping
T (4mm pitch)
0306, 0508 Type
❼Nominal capacitance
〔μF〕
example
105
1.0
106
10.0
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
Dimension [mm]
W
L
□WK105
(0204 inch)
□WK107
(0306 inch)
□WK212
(0508 inch)
Standard quantity [pcs]
Paper tape
Embossed tape
T
0.30±0.05
0.50±0.05
P
V
10000
-
0.52±0.05
1.00±0.05
0.80±0.10
1.60±0.10
0.50±0.05
V
-
4000
1.25±0.15
2.00±0.15
0.85±0.10
D
4000
-
■ AVAILABLE CAPACITANCE RANGE
Cap
[μF]
0.10
0.22
0.47
1.0
2.2
4.7
10
22
Type
VDC
[3-digit]
104
224
474
105
225
475
106
226
10
P
X7S
6.3
4
P
P
P
16
105
X6S
10
6.3
4
P
25
16
X5R
10
P
P
6.3
P
P
P
V
P
P,V
4
X7R
25
16
107
X6S
4
V
P
P
V
X7S
6.3
4
P
P,V
212
25
X5R
16
10
6.3
X6S
6.3
4
X5R
10
6.3
V
V
V
V
V
V
V
V
V
V
V
V
V
D
D
D
D
D
D
※Letters in the table indicate thickness.
Temp.char.Code
BJ
C6
C7
B7
Applicable standard
JIS
EIA
EIA
EIA
EIA
B
X5R
X6S
X7S
X7R
Temperature characteristics
Temperature range
〔℃〕
-25~+85
-55~+85
-55~+105
-55~+125
-55~+125
Ref. Temp.
〔℃〕
20
25
25
25
25
Capacitance change
〔%〕
±10
±15
±22
±22
±15
Capacitance tolerance
〔%〕
±10
(K)
±20
(M)
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
32
11
mlcc07_e-01
■ REPRESENTATIVE PART NUMBERS
●105TYPE
(0204 case size)
【Temperature Characteristic BJ:X5R】
・0.5mm thickness
(V)
Rated
voltage
Part number 1
10V
6.3V
LWK105 BJ105MV
JWK105 BJ105MV
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R*1
1
1
±20
±20
10
10
0.5±0.05
0.5±0.05
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R*1
0.1
0.22
0.47
0.1
0.47
1
0.22
±20
±20
±20
±20
±20
±20
±20
5
10
10
5
10
10
10
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
HALT
% Rated
voltage
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
・0.3mm thickness
(P)
Rated
voltage
4V
*1
Part number 2
TWK105 BJ104MP
EWK105 BJ224MP
LWK105 BJ474MP
JWK105 BJ104MP
JWK105 BJ474MP
JWK105 BJ105MP
AWK105 BJ224MP
CAPACITORS
25V
16V
10V
6.3V
Part number 1
We may provide X6S/X7S for some itemes according to the individual specification.
【Temperature Characteristic C6:X6S C7:X7S】
・0.5mm thickness
(V)
Rated
voltage
Part number 1
6.3V
4V
JWK105 C6105MV
AWK105 C6105MV
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X6S
X6S
1
1
±20
±20
10
10
0.5±0.05
0.5±0.05
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
0.1
0.1
0.22
0.1
0.22
0.47
0.22
0.47
1
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
10
10
5
10
10
10
10
10
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R
X5R
0.1
0.22
0.47
1
2.2
1
2.2
4.7
±20
±20
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
10
10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
・0.3mm thickness
(P)
Rated
voltage
16V
10V
6.3V
4V
Part number 1
Part number 2
EWK105 C6104MP
LWK105 C7104MP
LWK105 C6224MP
JWK105 C7104MP
JWK105 C7224MP
JWK105 C6474MP
AWK105 C6224MP
AWK105 C6474MP
AWK105 C6105MP
●107TYPE
(0306 case size)
【Temperature Characteristic BJ:X5R】
Rated
voltage
25V
16V
10V
6.3V
*1
Part number 1
Part number 2
TWK107 BJ104MV
EWK107 BJ224MV
EWK107 BJ474MV
LWK107 BJ105MV
LWK107 BJ225MV
JWK107 BJ105MV
JWK107 BJ225MV
JWK107 BJ475MV
We may provide X7R/X7S for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R C7:X7S C6:X6S】
Rated
voltage
25V
16V
6.3V
4V
Part number 1
TWK107 B7104MV
EWK107 B7224MV
EWK107 B7474MV
JWK107 C7105MV
AWK107 C7225MV
AWK107 C6475MV
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7S
X7S
X6S
0.1
0.22
0.47
1
2.2
4.7
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
11
33
■ REPRESENTATIVE PART NUMBERS
●212TYPE
(0508 case size)
【Temperature Characteristic BJ:X5R】
Rated
voltage
10V
6.3V
Part number 2
Part number 1
LWK212 BJ475□D
LWK212 BJ106MD
JWK212 BJ226MD
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
X5R
4.7
10
22
±10, ±20
±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X6S
X6S
X6S
4.7
10
22
±10, ±20
±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
HALT
% Rated
voltage
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
150%
Internal
code
(P/N 1)
Note
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic C6:X6S】
Rated
voltage
6.3V
4V
Part number 2
Part number 1
JWK212 C6475□D
JWK212 C6106MD
AWK212 C6226MD
Capacitance tolerance code is applied to □ of part number.
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■ Taiyo Yuden multilayer ceramic capacitor
JWK105 BJ105MP
JWK107 BJ475MV
M
JWK212 BJ226MD
Z
Z, ESR
Z
Z, ESR
Z, ESR
Z
M
M
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
34
11
mlcc07_e-01
CAPACITORS
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
11
35
ARRAY TYPE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦High density and high efficiency mounting.
◦General electronic equipment
◦Internal electrodes are composed of nickel for improved cost performance and reliability.
◦Communication equipment (cellular phone, wireless applications,
etc.)
■ PART NUMBER
E
4
K
❶
❷
❸
2
1
2 △ B
❹
❺
J
1
4 M D - T △
0
❻
❼
❸End
❻Temperature
❶Rated
❹Dimension
termination
characteristics
voltage〔VDC〕
Type
(inch)
L×W
[mm]
code
K
Plated
A
4
096 (0302) 0.9×0.6
B
BJ
J
6.3
110 (0504) 1.37×1.0
X5R
L
10
212 (0805) 2.0×1.25
B7
X7R
E
16
CH
❷Series name
❺Dimension
tolerance
CH
T
25
C0H
2 circuits
△
Standard
2
U
50
multilayer capacitor
△=Blank space
4 circuits
4
multilayer capacitor
❽
❾
❾Thickness
〔mm〕
P
0.3
K
0.45
V
0.5
B
0.6
A
0.8
D
0.85
❽Capacitance
tolerance
F
±1pF
K
±10%
M
±20%
❼Nominal capacitance
〔pF〕
example
104
100,000
105
1,000,000
❿
⓫
⓬Internal code
△ Standard
△=Blank space
❿Special code
- Standard
T
F
⓬
⓫Packaging
φ178mm Taping
(4mm pitch)
0504, 0805 Type
φ178mm Taping
(2mm pitch)
0302 Type
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
E2
W
L
Type
T
L
W
E1
E2
P
□2K096
(0302 inch)
0.9±0.05
0.6±0.05
0.23±0.10
0.125±0.075
0.45±0.05
□2K110
(0504 inch)
1.37±0.07
1.00±0.08
0.36±0.10
0.2±0.10
0.64±0.10
2.00±0.10
1.25±0.10
0.50±0.20
0.25±0.15
2.00±0.10
1.25±0.10
0.25±0.10
0.25±0.15
P
K
V
B
A
0.30±0.03
0.45±0.05
0.50±0.05
0.60±0.06
0.80±0.08
1.00±0.10
D
0.50±0.10
D
E1
P
W
L
E2
T
□2K212
(0805 inch)
□4K212
(0805 inch)
Standard quantity [pcs]
Embossed
Paper tape
tape
T
10000
-
4000
-
0.85±0.10
4000
-
0.85±0.10
4000
-
E1
P
■ AVAILABLE CAPACITANCE RANGE
BJ/B7
Cap
[μF]
0.001
0.0022
0.0047
0.01
0.022
0.047
0.1
0.22
0.47
1.0
2.2
CH
Type
VDC
[3-digit]
102
222
472
103
223
473
104
224
474
105
225
096 2 circuits
□2K096
B/X5R
X5R
10V 6.3V 4V
110 2 circuits
212 2 circuits
212 4circuits
□2K110
□2K212
□4K212
X7R
B/X5R
X5R
B/X5R X5R X7R
B/X5R
X5R
50V 25V 16V 50V 25V 16V 10V 16V 10V 6.3V 25V 10V 16V 25V 16V 10V 10V
B
B
B
P
B
B
B
B
B
K
K
K
K
B
B
B
B
B
B
B
D
D
B
A
K
D
D
D
A
A,V
V
A
D
D
D
※Letters in the table indicate thickness.
Cap
[pF]
10
12
15
18
22
27
33
39
47
56
68
82
100
Type
VDC
[3-digit]
100
120
150
180
220
270
330
390
470
560
680
820
101
096
2 circuits
□2K096
CH
25V
110
2 circuits
□2K110
CH
50V
P
P
P
P
P
P
P
P
P
P
P
P
P
B
B
B
B
B
B
B
B
B
B
B
B
B
※Letters in the table indicate thickness.
Temp.char.Code
BJ
B7
CH
Applicable standard
JIS
B
EIA
X5R
EIA
X7R
JIS
CH
EIA
C0H
Temperature characteristics
Temperature range
〔℃〕
Ref. Temp.
〔℃〕
20
-25~+85
-55~+85
25
-55~+125
25
-55~+125
20
-55~+125
25
Capacitance change
±10[%]
±15[%]
±15[%]
±60[ppm/℃]
±60[ppm/℃]
Capacitance tolerance
〔%〕
±10(K)
±20(M)
±10(K)
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
36
11
mlcc08_e-01
■ REPRESENTATIVE PART NUMBERS
●096TYPE
2 circuits type
【Temperature Characteristic
・0.45mm thickness
(K)
Rated
voltage
6.3V
4V
BJ:B/X5R】
Part number 1
Part number 2
J2K096 BJ473□K
J2K096 BJ104□K
J2K096 BJ224MK
J2K096 BJ474MK
A2K096 BJ105MK
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
X5R
X5R
X5R
0.047
0.1
0.22
0.47
1
±10, ±20
±10, ±20
±20
±20
±20
5
5
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
0.01
±10, ±20
5
0.3±0.03
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
10
12
15
18
22
27
33
39
47
56
68
82
100
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
B/X5R
X5R
X5R
1
0.47
1
2.2
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
5
10
10
0.8±0.08
0.8±0.08
0.8±0.08
0.8±0.08
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R*
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R*1
B/X5R
0.001
0.0022
0.0047
0.01
0.022
0.1
0.047
0.1
0.22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
5
3.5
5
5
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X5R
X5R
1
1
±20
±10, ±20
10
10
0.5±0.05
0.5±0.05
R
R
HALT
% Rated
voltage
150%
150%
150%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
200%
150%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
150%
150%
Internal
code
(P/N 1)
Note
・0.3mm thickness
(P)
Part number 1
10V
L2K096 BJ103□P
Part number 2
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic
Rated
voltage
25V
CH:CH/C0H】
Part number 1
Part number 2
T2K096 CH100FP
T2K096 CH120KP
T2K096 CH150KP
T2K096 CH180KP
T2K096 CH220KP
T2K096 CH270KP
T2K096 CH330KP
T2K096 CH390KP
T2K096 CH470KP
T2K096 CH560KP
T2K096 CH680KP
T2K096 CH820KP
T2K096 CH101KP
CAPACITORS
Rated
voltage
Capacitance tolerance code is applied to □ of part number.
●110TYPE
2 circuits type
【Temperature Characteristic
・0.8mm thickness
(A)
Rated
voltage
16V
10V
6.3V
BJ:B/X5R】
Part number 1
Part number 2
E2K110 BJ105□A
L2K110 BJ474□A
L2K110 BJ105□A
J2K110 BJ225□A
・0.6mm thickness
(B)
Rated
voltage
50V
25V
16V
10V
Part number 1
Part number 2
1
U2K110 BJ102□B
U2K110 BJ222□B
U2K110 BJ472□B
T2K110 BJ103□B
T2K110 BJ223□B
T2K110 BJ104□B
E2K110 BJ473□B
E2K110 BJ104□B
L2K110 BJ224□B
・0.5mm thickness
(V)
Rated
voltage
Part number 1
10V
6.3V
L2K110 BJ105MV
J2K110 BJ105□V
Part number 2
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
11
37
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic
Rated
voltage
50V
25V
16V
B7:X7R】
Part number 1
Part number 2
U2K110 B7102□B
U2K110 B7222□B
U2K110 B7472□B
T2K110 B7103□B
T2K110 B7223□B
E2K110 B7473□B
E2K110 B7104□B
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.001
0.0022
0.0047
0.01
0.022
0.047
0.1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
5
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔pF〕
Capacitance
tolerance
Q
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
10
12
15
18
22
27
33
39
47
56
68
82
100
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
R
R
R
R
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
X5R
1
2.2
±10, ±20
±20
5
10
0.85±0.1
0.85±0.1
R
R
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
B/X5R
B/X5R*1
B/X5R
B/X5R
X5R
0.1
0.1
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
5
10
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
200%
200%
200%
150%
Internal
code
(P/N 1)
Note
HALT
% Rated
voltage
200%
Internal
code
(P/N 1)
Note
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic
Rated
voltage
50V
CH:CH/C0H】
Part number 1
Part number 2
U2K110 CH100FB
U2K110 CH120KB
U2K110 CH150KB
U2K110 CH180KB
U2K110 CH220KB
U2K110 CH270KB
U2K110 CH330KB
U2K110 CH390KB
U2K110 CH470KB
U2K110 CH560KB
U2K110 CH680KB
U2K110 CH820KB
U2K110 CH101KB
●212TYPE
2 circuits type
【Temperature Characteristic
BJ:B/X5R】
Rated
voltage
Part number 1
25V
10V
T2K212 BJ105□D
L2K212 BJ225MD
Part number 2
Capacitance tolerance code is applied to □ of part number.
●212TYPE
4 circuits type
【Temperature Characteristic
Rated
voltage
25V
16V
10V
BJ:B/X5R】
Part number 1
Part number 2
T4K212 BJ104□D
E4K212 BJ104□D
L4K212 BJ224□D
L4K212 BJ474□D
L4K212 BJ105□D
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic
B7:X7R】
Rated
voltage
Part number 1
16V
E4K212 B7104□D
Part number 2
Temp.
char.
Capacitance
〔μF〕
Capacitance
tolerance
tanδ
〔%〕
Thickness
〔mm〕
Soldering
R:Reflow
W:Wave
X7R
0.1
±10, ±20
5
0.85±0.1
R
Capacitance tolerance code is applied to □ of part number.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
38
11
mlcc08_e-01
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
■Taiyo Yuden multilayer ceramic capacitor
L2K096BJ103MP
100000
10000
1000
1000
100
100
10
10
1
1
0.1
0.1
0.01
0.1
1
10
100
1000 10000 100000
J2K096BJ104MK
100000
10000
0.01
0.1
T2K096CH100FP
1000000
1
10
100
1000 10000 100000
10000
1000
1000
100
100
10
10
1
1
0.1
0.1
10
100
1000
10000
ESR
Impedance
100000
10000
0.01
1
T2K096CH101KP
1000000
ESR
Impedance
100000
0.01
1
10
100
T2K110BJ103MB/T2K110B7103MB
100000
100000
E2K110BJ104MB/E2K110B7104MB
10000
10000
L2K110BJ105MA
1000
10
1
10
10
1
1
1
100
10
100
100
0.1
0.1
0.1
0.1
0.01
0.01
0.001
0.1
0.001
0.1
1
10
100
1000 10000 100000
J2K110BJ225MA
10000
1000
100
1000
1000
10000
1
10
100
1000 10000 100000
CAPACITORS
1000000
1000
〔MHz〕
〔MHz〕
0.01
0.01
0.001
0.1
0.001
0.1
1
10
100
1000 10000 100000
1
10
100
1000 10000 100000
L4K212BJ105KD
10000
1000
100
10
1
0.1
0.01
0.001
0.1
1
10
100
1000 10000 100000
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
11
39
■ PACKAGING
①Minimum Quantity
◦Taped package
Thickness
Type
□MK042
□MK063
□2K096
□WK105
□MK105
□VK105
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
□MK325
□MK432
mm
code
0.2
0.3
0.3
0.45
0.3
0.5
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.5
0.6
0.8
0.45
0.85
1.25
0.85
0.85
0.85
1.15
1.25
1.6
0.85
1.15
1.9
2.0max
2.5
2.5
C
P,T
P
K
P
V
C
P
V, W
W
K
V
A
V
B
A
K
D
G
D
D
D
F
G
L
D
F
N
Y
M
M
Standard quantity [pcs]
Embossed
tape
—
40000
15000
③Representative taping dimensions
◦Paper Tape(8mm wide)
◦Pressed carrier tape(2mm pitch)
㧗0.1/−0
Paper tape
10000
20000
15000
—
T1
Unit:mm
10000
Type
4000
—
4000
4000
—
—
3000
4000
—
□MK063
□WK105
Chip Cavity
A
B
0.37
0.67
0.65
1.15
Insertion Pitch
F
2.0±0.05
Tape Thickness
T
T1
0.45max.
0.42max.
0.45max.
0.42max.
◦Punched carrier tape(2mm pitch)
㧗0.1/−0
—
3000
Unit:mm
2000
—
—
Type
500(T), 1000(P)
500
Chip Cavity
A
B
□2K096
0.72
1.02
□MK105
□VK105
0.65
1.15
Insertion Pitch
F
52.0±0.05
Tape Thickness
T
0.45max.
0.6max.
0.8max.
②Taping material
※No bottom tape for pressed carrier tape
◦Paper tape
◦Punched carrier tape(4mm pitch)
㧗0.1/−0
Unit:mm
Type
◦Embossed tape
□MK107
□WK107
□2K110
□MK212
□WK212
□4K212
□2K212
□MK316
Chip Cavity
A
B
Insertion Pitch
F
Tape Thickness
T
1.0
1.8
1.1max.
1.15
1.55
1.0max.
1.65
2.4
2.0
3.6
4.0±0.1
1.1max.
◦Chip filled
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack-P1
11
mlcc_pack_e-01
■ PACKAGING
◦Embossed tape(4mm wide)
④Trailer and Leader
0.8±0.04
4.0±0.05
1.8±0.02
0.9±0.05
100mm or more
Trailer 160mm min.
Leader 400mm min.
F
1.0±0.02
2.0±0.04
Unit:mm
Type
□MK042
Chip Cavity
A
B
0.23
0.43
Insertion Pitch
F
1.0±0.02
Tape Thickness
K
T
0.5max.
0.25max.
⑤Reel size
t
E
C
◦Embossed tape(8mm wide)
㧗0.1/−0
A
B
D
R
W
Unit:mm
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
E
2.0±0.5
R
1.0
4mm wide tape
8mm wide tape
12mm wide tape
t
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit:mm
Type
□WK107
□MK212
□MK316
□MK325
Chip Cavity
A
B
1.0
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
F
4.0±0.1
Tape Thickness
K
T
1.3max
0.25±0.1
3.4max.
0.6max.
◦Embossed tape(12mm wide)
⑥Top Tape Strength
㧗0.1/−0
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow
as illustrated below.
2.0±0.1
F
Type
□MK432
Chip Cavity
A
B
3.7
4.9
Unit:mm
Insertion Pitch
F
8.0±0.1
Tape Thickness
K
T
4.0max.
0.6max.
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
12±0.1
36+0/−0.2
110±0.7
8.8±0.1
2.0+0/−0.1
1.5+0.1/−0
6.8±0.1
12.0±0.1
+0/−0.2
+0.2/−0
1.0+0/−0.1
Unit:mm
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
11
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Temperature Compensating
(Class 1)
Specified
Value
Standard
High Frequency Type
-55 to +125℃
BJ
B7
C6
C7
High Permittivity(Class 2)
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
2. Storage Conditions
Temperature Compensating
(Class 1)
Specified
Value
Standard
High Frequency Type
-55 to +125℃
BJ
B7
C6
C7
High Permittivity(Class 2)
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
3. Rated Voltage
Temperature Compensating
Specified(Class 1)
Value
High Permittivity(Class 2)
Standard
High Frequency Type
4. Withstanding Voltage
(Between terminals)
Standard
Temperature Compensating
Specified(Class 1)
High Frequency Type
Value
High Permittivity
(Class 2)
【Test Methods and Remarks】
Applied voltage
Duration
Charge/discharge current
50VDC, 25VDC, 16VDC
50VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
No breakdown or damage
Class 1
Class 2
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
High Frequency Type
Specified(Class 1)
Value
High Permittivity(Class 2)Note 1
10000 MΩ min.
C≦0.047μF : 10000 MΩ min.
C>0.047μF : 500MΩ・μF
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance(Tolerance)
Standard
C△
U△
0.5pF≦C≦5pF:±0.25pF
0.5pF<C≦10pF:±0.5pF
C>10pF:±5%
High Frequency Type
CH
RH
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
Temperature Compensating
Specified(Class 1)
Value
High Permittivity(Class 2)
【Test Methods and Remarks】
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
RH
S△
T△
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
BJ, B7, C6,C7:±10% or ±20%, F:-20%/+80%
Class 1
Class 2
High Frequency Type
C≦10μF
C>10μF
None
Thermal treatment(at 150℃ for 1hr) Note 2
1MHz±10%
1kHz±10%
120±10Hz
0.5 to 5Vrms
1±0.2Vrms
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Standard
Temperature Compensating
Specified(Class 1)
High Frequency Type
Value
High Permittivity
(Class 2)Note 1
【Test Methods and Remarks】
C<30 pF:Q≧400+20C、C≧30 pF:Q≧1000 (C:Nominal capacitance)
Refer to detailed specification
BJ, B7, C6,C7:2.5% max., F:7% max.
Class 1
Class 2
High Frequency Type
C≦10μF
C>10μF
None
Thermal treatment(at 150℃ for 1hr) Note 2
1MHz±10%
1GHz
1kHz±10%
120±10Hz
0.5 to 5Vrms
1±0.2Vrms
0.5±0.1Vrms
None
Standard
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment: HP4291A
Measuring jig: HP16192A
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli-R1
11
mlcc_reli_e-01
■ RELIABILITY DATA
8. Temperature Characteristic
(Without voltage application)
Standard
Temperature Compensating
(Class 1)
High Frequency Type
Temperature Characteristic[ppm/℃]
C□ :0
CH, CJ, CK
R□ :ー220 RH
S□ :ー330 SH, SJ, SK
T□ :ー470 TJ, TK
U□ :ー750 UJ, UK
SL :+350 to -1000
Specified
Value
BJ
B7
C6
C7
High Permittivity(Class 2)
F
Specification
B
X5R
X7R
X6S
X7S
F
Y5V
Tolerance
H±60
J±120
K±250
Capacitance change
±10%
±15%
±15%
±22%
±22%
+30/ー80%
+22/ー82%
Reference temperature
20℃
25℃
25℃
25℃
25℃
20℃
25℃
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
【Test Methods and Remarks】
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C85-C20)
6
× 10(ppm/℃)
C20×△T
△T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C-C2)
×100
(%)
B、F
X5R、X7R、X6S、X7S、Y5V
C2
Minimum operating temperature
C :Capacitance in Step 1 or Step 3
20℃
25℃
C2 :Capacitance in Step 2
Maximum operating temperature
Step
1
2
3
9. Deflection
Standard
Temperature Compensating
Specified(Class 1)
Value
High Frequency Type
High Permittivity(Class 2)
Appearance :
Capacitance change :
Appearance :
Capacitance change :
Appearance :
Capacitance change :
No abnormality
Within ±5% or ±0.5 pF, whichever is larger.
No abnormality
Within±0.5 pF
No abnormality
Within ±12.5%
(BJ, B7, C6, C7)
, Within ±30%
(F)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Board
042、063 Type
The other types
glass epoxy-resin substrate
Thickness
0.8mm
1.6mm
Warp
Duration
1mm
10 sec.
Thickness
1.6mm
Warp
1mm
Duration
10 sec.
Board
Warp
Array Type
096、110、212 Type
Board
glass epoxy-resin substrate
Capacitance measurement shall
be conducted with the board bent
10. Body Strength
Standard
High Frequency Type
Temperature Compensating
Specified(Class 1)
Value
High Permittivity(Class 2)
【Test Methods and Remarks】
High Frequency Type
Applied force: 5N
Duration: 10 sec.
—
No mechanical damage.
—
A
A
A
11. Adhesive Strength of Terminal Electrodes
Standard
Temperature Compensating
Specified(Class 1)
High Frequency Type
Value
High Permittivity(Class 2)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
042、063 Type
105 Type or more
Applied force
2N
5N
No terminal separation or its indication.
Array Type
Duration
30±5 sec.
096 Type
110、212 Type
Applied force
2N
5N
Duration
30±5 sec.
12. Solderability
Standard
Temperature Compensating
Specified(Class 1)
At least 95% of terminal electrode is covered by new solder.
High Frequency Type
Value
High Permittivity(Class 2)
【Test Methods and Remarks】
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
4±1 sec.
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
11
mlcc_reli-R2
■ RELIABILITY DATA
13. Resistance to Soldering
Standard
Temperature Compensating
(Class 1)
High Frequency Type
Specified
Value
High Permittivity(Class 2) Note 1
Appearance:
No abnormality
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q:
Initial value
Insulation resistance: Initial value
: No abnormality
Withstanding voltage(between terminals)
Appearance:
No abnormality
Capacitance change: Within ±2.5%
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Dissipation factor:
Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
【Test Methods and Remarks】
Class 1
Class 2
105 Type
Array
(096, 110 Type)
None
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
3±0.5 sec.
6 to 24 hrs(Standard condition) Note 5
042, 063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
105, 107, 212 Type
316, 325 Type
Array
(096, 110,212 Type)
Thermal treatment(at 150℃ for 1 hr)Note 2
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs(Standard condition) Note 5
042、063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
14. Temperature Cycle (Thermal Shock)
Standard
Temperature Compensating
(Class 1)
High Frequency Type
Specified
Value
High Permittivity(Class 2) Note 1
Appearance:
No abnormality
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q:
Initial value
Insulation resistance: Initial value
: No abnormality
Withstanding voltage(between terminals)
Appearance:
No abnormality
Capacitance change: Within ±0.25pF
Q:
Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Dissipation factor:
Initial value
Insulation resistance: Initial value
Withstanding voltage(between terminals)
: No abnormality
【Test Methods and Remarks】
Class 1
None
Preconditioning
Step
1
2
3
4
1 cycle
Number of cycles
Recovery
Class 2
Thermal treatment(at 150℃ for 1 hr) Note 2
Temperature
(℃)
Lowest operating temperature +0/-3
Normal temperature
Highest operating temperature +0/-3
Normal temperature
Time
(min.)
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs(Standard condition) Note 5
24±2 hrs(Standard condition) Note 5
15. Humidity(Steady State)
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivity(Class 2) Note 1
Appearance:
No abnormality
Capacitance change: Within ±5% or ±0.5pF, whichever is larger.
Q:
C<10pF:
Q≧200+10C
10≦C<30pF: Q≧275+2.5C
C≧30pF:
Q≧350
(C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
No abnormality
Appearance:
Capacitance change: Within ±0.5pF,
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%
(BJ, B7, C6, C7)
Within ±30%
(F)
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max.
(F)
Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Humidity
Duration
Recovery
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500+24/ー0 hrs
6 to 24 hrs(Standard condition) Note 5
Preconditioning
Temperature
Humidity
Duration
Recovery
All items
Thermal treatment(at 150℃ for 1 hr) Note 2
40±2℃
90 to 95%RH
500+24/ー0 hrs
24±2 hrs(Standard condition) Note 5
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli-R3
11
mlcc_reli_e-01
■ RELIABILITY DATA
16. Humidity Loading
Standard
Temperature Compensating
(Class 1)
High Frequency Type
Specified
Value
High Permittivity(Class 2) Note 1
Appearance:
No abnormality
Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.
Q:
C<30pF:Q≧100+10C/3
C≧30pF:Q≧200
(C:Nominal capacitance)
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: C≦2pF:Within ±0.4 pF
C>2pF:Within ±0.75 pF
(C:Nominal capacitance)
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%
(F)
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max.
(F)
Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500+24/ー0 hrs
Rated voltage
50mA max.
6 to 24 hrs(Standard condition) Note 5
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
All items
Voltage treatment
(Rated voltage are applied for 1 hour at 40℃) Note 3
40±2℃
90 to 95%RH
500+24/ー0 hrs
Rated voltage
50mA max.
24±2 hrs(Standard condition) Note 5
17. High Temperature Loading
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivity(Class 2) Note 1
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Q:
C<10pF:
Q≧200+10C
10≦C<30pF: Q≧275+2.5C
C≧30pF:
Q≧350(C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%
(BJ, B7, C6, C7)
Within ±30%
(F)
Dissipation factor:
5.0% max.
(BJ, B7, C6, C7)
11.0% max.
(F)
Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
Note 1
Note 2
Note 3
Note 4
High Frequency Type
None
125±3℃
1000+48/ー0 hrs
Rated voltage×2
50mA max.
6 to 24hr(Standard condition) Note 5
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
BJ, F
C6
B7, C7
Voltage treatment(Twice the rated voltage shall be
applied for 1 hour at 85℃, 105℃ or 125℃) Note 3, 4
85±2℃
105±3℃
125±3℃
1000+48/ー0 hrs
Rated voltage×2 Note 4
50mA max.
24±2 hrs(Standard condition) Note 5
The figures indicate typical specifications. Please refer to individual specifications in detail.
Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24±2hours.
Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
11
mlcc_reli-R4
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general purpose applications.
◆Operating Voltage(Verification of Rated voltage)
Precautions
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage
having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations(Design of Land-patterns)
1. When capacitors are mounted on PCBs, the amount of solder used(size of fillet)can directly affect the capacitor performance. Therefore, the following items must
be carefully considered in the design of land patterns:
(1)
Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper
amount of solder.
Precautions
(2)
When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist.
(Capacitor layout on PCBs)
◆Pattern configurations
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes(PCB cutting, board inspection,
mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.)
. For this reason, land pattern configurations and positions of capacitors
shall be carefully considered to minimize stresses.
◆Pattern configurations(Design of Land-patterns)
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
(1)
Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions(unit: mm)
Wave-soldering
Land patterns for PCBs
Type
Size
L
W
A
B
C
Land
107
212
316
325
1.6
2.0
3.2
3.2
0.8
51.25
1.6
2.5
0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
Chip capacitor
C
B
Reflow-soldering
Type
Size
L
W
A
B
C
042
063
105
107
0.4
0.6
1.0
1.6
0.2
0.3
0.5
0.8
0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0
0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8
0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8
Solder-resist
212
2.0
51.25
0.8 to 1.2
0.8 to 1.2
0.9 to 1.6
316
3.2
1.6
1.8 to 2.5
1.0 to 1.5
1.2 to 2.0
325
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
432
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
B
A
Chip capacitor
W
L
●LWDC: Recommended land dimensions for reflow-soldering(unit: mm)
LWDC
Type
Size
105
0.52
1.0
0.18 to 0.22
0.2 to 0.25
0.9 to 1.1
L
W
A
B
C
Technical
considerations
107
50.8
1.6
0.25 to 0.3
0.3 to 0.4
1.5 to 1.7
212
1.25
2.0
0.5 to 0.7
0.4 to 0.5
1.9 to 2.1
W
L
●Array type: Recommended land dimensions for reflow-soldering(unit: mm)
Type
Size
a
b
c
d
L
W
2 circuits
096(2 circuits) 110(2 circuits) 212(2 circuits) 212
(4 circuits)
0.9
1.37
2.0
2.0
0.6
1.0
1.25
1.25
0.25 to 0.35
0.35 to 0.45
0.5 to 0.6
0.5 to 0.6
0.15 to 0.25
0.55 to 0.65
0.5 to 0.6
0.5 to 0.6
0.15 to 0.25
0.3 to 0.4
0.5 to 0.6
0.2 to 0.3
0.45
0.64
1.0
0.5
4 circuits
Chip capacitor
c
c
a
b
a
Land
d
a
b
a
d
(2)
Examples of good and bad solder application
Items
Not recommended
Recommended
Mixed mounting of
SMD and leaded
components
Component
placement close to
the chassis
Hand-soldering
of leaded
components
near mounted
components
Horizontal
component
placement
To next page
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec-P1
11
mlcc_prec_e-01
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
2. PCB Design
◆Pattern configurations
(Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or deflection.
Items
Not recommended
Recommended
Deflection of board
Technical
considerations
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from
least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location.
3. Mounting
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2.Maintenance and inspection of mounting machines shall be conducted periodically.
Precautions ◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further
information.
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points
shall be considerable.
(1)The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
(2)The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the
PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement:
Items
Not recommended
Recommended
Single-sided
mounting
Double-sided
mounting
Technical
considerations
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted
periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions
shall be noted in the application of adhesives.
(1)
Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f . The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
(2)
The recommended amount of adhesives is as follows;
[Recommended condition]
Figure
212/316 case sizes as examples
a
0.3mm min
b
100 to 120 μm
c
Adhesives shall not contact land
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
11
mlcc_prec-P2
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)
Flux used shall be less than or equal to 0.1 wt%(in CI equivalent)of halogenated content. Flux having a strong acidity content shall not be applied.
(2)
When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
(3)
When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine,
Chlorine, etc.)
)content is used to activate fl
flux,
ux, or highly acidic fl
flux
ux is used, it may lead to corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect
the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause
a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be
considered carefully when water-soluble flux is used.
Peak260℃
260℃Max.
Max.
Peak
230℃
Within10sec.
10sec.
Within
Within 10 sec.
Preheating
200 60sec.
200
200
Min.
60sec.
Min.
Slow
Slow
cooling
Slowcooling
cooling
300
100
100
100
Peak 260℃ Max.
Withinabove
10sec.
Heating
Preheating 150℃
230℃
200 60sec. Min.
40sec. Max.
0
Slow
cooling
300
100
Peak 260℃ Max.
230〜250℃
Within 10sec.
Heating
above
Heating
above
Within
3sec.
Preheating
Heating
above
Preheating 150℃
150℃
Preheating
230℃
230℃
Preheating
150℃
120sec. Min.
230℃
60sec. Min.
Min.
60sec.
40sec. Max.
Max.
40sec.
200
60sec. Min.
200
00
40sec.
Max.
Slow
0
0
Slow cooling
cooling
Caution
300
①The300
ideal condition is to have solder mass(fillet)controlled
to
1/2
to
1/3
of
the
thickness
of a capacitor.
300
100 excessive dwell times
100
230〜250℃
230〜250℃
②Because
can adversely affect solderability,
soldering duration230〜250℃
shall be kept as
Within
3sec.
Within
3sec.
close to recommended
timesHeating
as possible.
Preheating
Preheating
Within 3sec.
above
Preheating
Preheating
150℃
120sec.
Min.
120sec.
Min.
230℃
120sec. Min.
200
200
60sec. Min.
200
40sec. Max.
[Wave soldering]
0
0
Slow cooling
cooling
Slow
Slow cooling
【Recommended condition for Pb-free
soldering】
【Recommended conditions for eutectic soldering】
200
00
Preheating
120sec. Min.
300
100
200
Slow cooling
300
300
100
200
200
0
230〜250℃
Within 3sec.
Peak260℃
260℃Max.
Max.
Peak
Within10sec.
10sec.
Within
120sec. Min.
Min.
120sec.
Slow
Slow
cooling
Preheating cooling
Preheating
150℃
150℃
120sec. Min.
[Hand200
soldering]
00
120sec. Min.
0
300
100
200
0
Slow
Preheating cooling
150℃
Peak 260℃ Max.
Within 10sec.
120sec. Min.
Slow
100
300
230〜280℃
Within 3 sec.
②The soldering iron shall not directly touch capacitors.
0
Preheating
60sec. Min.
0
400
60sec. Min.
⊿T
Slow cooling
200
400
400
400
100
300
300
300
0
200
200
200
400
100
100
100
300
00
200
100
0
400
Peak 350℃ Max.
Within 3sec.
300
0
【Recommended condition for Pb-free soldering】
200
400
400
Slow cooling
400
Peak 350℃
350℃Max.
Max.
Peak
230〜280℃Within
Within 3sec.
3sec.
100
Within 3 sec.
300
300
300 Preheating
⊿T
⊿T
60sec. Min.
0
Slow cooling
cooling
Slow
0
200
200
200
200
200
Slow cooling
cooling
Slow
Preheating
Preheating
Slow cooling
400
400
150℃
Min.350℃ Max.
150℃
Min.
Peak
230〜280℃
100
100
100
100
Within
3sec.
100
Within 3 sec.
300 Preheating
300
Preheating
Preheating
⊿T
60sec.
Min.
60sec.
Min.
60sec. Min.
Min.
60sec.
60sec. Min.
00
00
0
Slow cooling
⊿T
200
200
Slow cooling
316type or less Preheating
⊿T≦150℃
Caution
150℃ Min.
①Use100
a 50W soldering iron with a maximum tip diameter of100
1.0 mm.
Slow
【Recommended conditions for eutectic soldering】
Preheating cooling
400
400
150℃
100
230〜280℃
230〜280℃
Within 33 sec.
sec.
Within
300
300
T
PC board
Peak 260℃ Max.
Within 10sec.
Caution
Preheating cooling
300
400 as for reflow soldering
①Wave
soldering must not be applied to capacitors designated
150℃ only.
100
100
Peak 260℃ Max.
Within 10sec.
Capacitor
Solder
Temperature(℃) Temperature
Temperature(℃)
(℃) Temperature(℃)
Temperature(℃)
300
100
100
Temperature(℃) Temperature
Temperature(℃)
(℃) Temperature(℃)
Temperature(℃)
Temperature(℃)
Temperature(℃)
Temperature(℃)
Temperature(℃)
Technical
considerations
300
100
0
Preheating
Peak 280℃
280℃Max.
Max.
Peak
150℃ Peak
Min. 350℃ Max.
Within 3sec.
3sec.
Within
Within 3sec.
⊿T Min.
60sec.
⊿T
⊿T
Temperature(℃)
Temperature(℃) Temperature
Temperature(℃)
(℃)Temperature(℃) Temperature
Temperature(℃)
(℃) Temperature(℃) Temperature
Temperature(℃)
(℃) Temperature(℃)
Temperature
(℃)
Temperature
(℃)
Temperature
(℃)
300
300
300
200
Slow
【Recommended condition for Pb-free cooling
soldering】
Slow cooling
cooling
Slow
Slow cooling
Preheating
Preheating
Preheating
150℃
Min.
150℃
Min.
Peak
280℃ Max.
150℃
Min.
Within 3sec.
60sec. Min.
Min.
60sec.
60sec. Min.
⊿T
Slow cooling
⊿T
325type or morePreheating
⊿T≦130℃
150℃ Min.
60sec. Min.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec-P3
11
mlcc_prec_e-01
300
⊿T
200
400
100
Temperature(℃)
【Recommended conditions for eutectic soldering】
Temperature(℃)
[Reflow soldering]
Temperature(℃)
◆Soldering
• Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
• Therefore, the soldering must be conducted with great care so300
as to prevent malfunction of the components due to excessive thermal shock.
Peak 260℃
• Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between
theMax.
capacitors and solder shall be within 100 to 130℃.
• Cooling : The temperature difference between the capacitors and cleaning process shall Within
not be10sec.
greater than 100℃.
300
60sec. M
0
200
⊿T
100
0
60sec.
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning.(e.g. to
remove soldering flux or other materials from the production process.)
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in
a degradation of the capacitor's electrical properties(especially insulation resistance)
.
2. Inappropriate cleaning conditions(insufficient or excessive cleaning)may adversely affect the performance of the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered
portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked;
Ultrasonic output : 20 W/ℓ or less
Ultrasonic frequency : 40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or
Precautions
destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
(1)
If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
Please be careful that the mounted components do not come in contact with or bump against other boards or components.
(2)
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in
the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature
: Below 30℃
Humidity
: Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so care shall be taken to design circuits . Even if
capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour.
Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/
consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability beations
fore using the capacitors.
※RCR-2335B
(Safety Application Guide for fixed ceramic capacitors for use in electronic equipment)
is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
* This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
11
mlcc_prec-P4
Similar pages