YAGEO JR-07330RL General purpose chip resistor Datasheet

Product specification – Jul 02, 2009 V.4 Supersedes Date of Mar. 06, 2003
1100
DATA SHEET
GENERAL PURPOSE CHIP RESISTORS
RC1206
5%, 1%
RoHS compliant
Product specification
Chip Resistor Surface Mount
RC
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC1206 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER
APPLICATIONS
All general purpose application
FEATURES
Halogen Free Epoxy
RoHS compliant
-
-
RC1206
( PREFERRED )
X R - XX XXXX L
(1) (2) (3) (4)
(5)
(6)
(1) TOLERANCE
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
(2) PACKAGING TYPE
R = Paper taping reel
Products with lead free
terminations meet RoHS
requirements
(3) TEMPERATURE COEFFICIENT OF RESISTANCE
Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
(4) TAPING REEL
– = Base on spec
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
Reducing environmentally
hazardous wastes
High component and equipment
reliability
2
9
1206 (RoHS Compliant)
SERIES
(5) RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Saving of PCB space
None forbidden-materials used
in products/production
Detailed resistance rules show in table of “Resistance rule of global part number”.
(6) DEFAULT CODE
Letter L is system default code for order only (Note)
Resistance rule of global part
number
Resistance code rule
Example
0R
0R = Jumper
XRXX
(1 to 9.76 Ω)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
ORDERING EXAMPLE
The ordering code of a RC1206
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC1206FR-0756RL.
NOTE
1. All our RSMD products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
2. On customized label, "LFP" or specific
symbol can be printed
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
3
9
1206 (RoHS Compliant)
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER
( PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC
CODE
2322 / 2350
XXX XXXXX L
(1)
TYPE/ START
1206 IN (1)
(2)
(3)
Last digit of 12NC
Resistance decade (3)
(4)
TOL. RESISTANCE
(%) RANGE
PAPER / PE TAPE ON REEL (units) (2)
5,000
10,000/not preferred
20,000
Last digit
0.01 to 0.0976 X
0.1 to 0.976 X
0
8
7
RC01
2322
±5%
1 to 10 MΩ
711 61xxx
711 51xxx
711 81xxx
1 to 9.76 X
RC02
2322
±1%
1 to 10 MΩ
724 6xxxx
724 7xxxx
724 8xxxx
10 to 97.6 X
9
HRC01 2350
±5%
11 to 22 MΩ
520 10xxx
-
-
100 to 976 X
1
Jumper 2322
-
0Ω
711 91032
711 91005
711 92004
1 to 9.76 KX
2
10 to 97.6 KX
3
(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.
100 to 976 KX
4
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
1 to 9.76 MX
5
10 to 97.6 MX
6
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
(4) Letter L is system default code for order only (Note)
ORDERING EXAMPLE
The ordering code of a RC02 resistor, value 56 X with ±1% tolerance,
supplied in tape of 10,000 units per reel is: 232272465609L or
RC1206FR-0756RL.
Example:
0.02 X
=
0200 or 200
0.3 X
=
3007 or 307
1X
=
1008 or 108
33 KX
=
3303 or 333
10 MX
=
1006 or 106
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol can be printed
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
4
9
1206 (RoHS Compliant)
MARKING
RC1206
E-24 series: 3 digits
03
YNSC001
Fig. 1
Value = 10 KΩ
First two digits for significant figure and 3rd digit for number of zeros
Both E-24 and E-96 series: 4 digits
00
YNSC004
Fig. 2 Value = 10 KΩ
First three digits for significant figure and 4th digit for number of zeros
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Nibarrier) are added. See fig.3
OUTLINES
For dimension see Table 1
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
ceramic substrate
I2
overcoat
I1
W
DIMENSIONS
YNSC066
Table 1
TYPE
L
RC1206
L (mm)
3.10 ± 0.10
W (mm)
1.60 ± 0.10
H (mm)
0.55 ± 0.10
I1 (mm)
0.45 ± 0.20
I2 (mm)
0.40 ± 0.20
Fig. 3 Chip resistor outlines
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
ELECTRICAL CHARACTERISTICS
5
9
1206 (RoHS Compliant)
FOOTPRINT AND SOLDERING
PROFILES
Table 2
RC1206 1/4 W
CHARACTERISTICS
Operating Temperature Range
–55 °C to +155 °C
Maximum Working Voltage
200 V
Maximum Overload Voltage
400 V
Dielectric Withstanding Voltage
500 V
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
5% (E24) 1 Ω to 22 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 10 MΩ
Zero Ohm Jumper < 0.05 Ω
Temperature Coefficient
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
10 MΩ < R ≤ 22 MΩ
±200 ppm/°C
10 Ω < R ≤ 10 MΩ
±100 ppm/°C
Rated Current
2A
Maximum Current
10 A
Jumper Criteria
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
RC1206
Paper Taping Reel (R)
7" (178 mm)
5,000 units
10" (254 mm)
10,000 units
13" (330 mm)
20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
RC1206 rated power at 70°C is 1/4 W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
or max. working voltage whichever is less
handbook, halfpage
P
(%Prated )
MLB206_2
100
50
0
55
0
50
70
100
155
o
Tamb ( C)
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
Fig. 4 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (Tamb)
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
6
9
1206 (RoHS Compliant)
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Temperature
Coefficient of
Resistance
(T.C.R.)
IEC 60115-1 4.8
At +25/–55 °C and +25/+125 °C
Refer to table 2
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Life/Endurance
IEC 60115-1 4.25.1
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
IEC 60068-2-2
Moisture
Resistance
MIL-STD-202G Method-106G
1,000 hours at 155±5 °C, unpowered
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
Thermal Shock
MIL-STD-202G Method-107G
-55/+125 °C
±(0.5%+0.05 Ω) for 1% tol.
Number of cycles required is 300. Devices
unmounted
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
Short Time
Overload
IEC60115-1 4.13
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
7
9
1206 (RoHS Compliant)
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
IEC 60068-2-21
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 1%, 5% tol.
2 mm bending
No visible damage
<50 mΩ for Jumper
Bending time: 60±5 seconds
Low
Temperature
Operation
IEC 60068-2-1
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω) for 1% tol .
This constitutes shall be repeated for 96 hours
No visible damage
±(1.0%+0.05 Ω) for 5% tol.
However the applied voltage shall not exceed
the maximum operating voltage
Insulation
Resistance
IEC 60115-1 4.6
Rated continuous overload voltage (RCOV)
for 1 minute
Type
Voltage (DC)
Dielectric
Withstand
Voltage
IEC 60115-1 4.7
Resistance to
Solvent
IPC/JEDEC J-STD-020D
Noise
Biased Humidity
(steady state)
IEC 60115-1 4.12
IEC 60115-1 4.37
≥10 GΩ
RC1206
100 V
Maximum voltage (Vrms) applied for 1 minute
Type
RC1206
Voltage (AC)
500 Vrms
No breakdown or flashover
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Maximum voltage (Vrms) applied
Resistors range
Value
R < 100 Ω
10 dB
100 Ω ≤ R < 1 KΩ
20 dB
1 KΩ ≤ R < 10 KΩ
30 dB
10 KΩ ≤ R < 100 KΩ
40 dB
100 KΩ ≤ R < 1 MΩ
46 dB
1 MΩ ≤ R ≤ 22 MΩ
48 dB
Steady state for 1000 hours at 40 °C / 95% R.H.
RCWV applied for 1.5 hours on and
0.5 hour off
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
8
9
1206 (RoHS Compliant)
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Intermittent
Overload
IEC 60115-1 4.39
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
Electrical Test not required
Well tinned (≥95% covered)
Magnification 50X
No visible damage
Solderability
- Wetting
IPC/JEDEC J-STD-002B test B
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
IPC/JEDEC J-STD-002B test D
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
IEC 60068-2-58
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 1% tol .
Leadfree solder, 260 °C, 10 seconds
immersion time
±(1.0%+0.05 Ω) for 5% tol.
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
<50 mΩ for Jumper
www.yageo.com
Jul 02, 2009 V.4
Product specification
Chip Resistor Surface Mount
RC
SERIES
9
9
1206 (RoHS Compliant)
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 4
-
Jul 02, 2009
- Test Items and methods updated
- Test requirements upgraded
Version 3
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC1206 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Sep 03, 2004 -
- New datasheet for 1206 thick film 1% and 5% with lead-free terminations
- Replace the 1206 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC01_5_4
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jul 02, 2009 V.4
Similar pages