Pulse JV006I21NL Pulsejackâ ¢ surface mount 1x1 Datasheet

PulseJack™
Surface Mount 1x1
Description:
100 Base-TX (Fast Ethernet) surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without
LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and
Network Interface Cars (NIC).
Features and Benefits:
RoHS peak wave reflow temperature rating 245°C
J0C SMT product, reduced size and low cost alternative
to JV series
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Minimum 1500Vrms isolation per IEEE 802.3 requirement
SMT Contacts
JV0
J0C
J30
Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C
Tab
1
Option LEDs
Up/Down L/R
Turns
Ratios
RoHS
Compliant
Part No.
BST
Circuit
Insertion
Loss
EMI
Finger (dB MAX)
Return Loss
(dB MIN)
100Ω (±15Ω)
Common Mode
Hipot
Rejection
(Vrms MIN)
(dB MIN)
Crosstalk
(dB MIN)
1-65
MHz
1-10
MHz
30
MHz
60-80
MHz
1-10
MHz
30-60
MHz
60-100
MHz
1-50
MHz
No
-1.0
-18
-14
-10
-35
-35
-30
-20
-20
1500
No
Yes
-1.0
-18
-14
-10
-35
-35
-30
-20
-20
1500
No
Yes
No
-1.0
-18
-14
-10
-35
-35
-30
-20
-20
1500
Down
No
Yes
Yes
-1.0
-18
-14
-10
-35
-35
-30
-20
-20
1500
1CT:1
Down
No
No
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
1CT:1
1CT:1
Down
No
Yes
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
JV026I21NL
1CTS:1
1CT:1
Down
No
Yes
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
J3011G21DNL
1CT:1
1CT:1
Up
G/Y
Yes
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
J3026G01DNL
1CTS:1
1CT:1
Up
G/Y
Yes
No
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
1CTS:1
1CT:1
Up
G/Y
Yes
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
1CT:1
1CT:1
Up
G/Y
Yes
Yes
-1.0
-20
-16
-12
-40
-35
-30
-30
-20
1500
TX
RX
J0C-0003NL
1CT:1
1CT:1
Down
No
No
J0C-0004NL
1CT:1
1CT:1
Down
No
J0C-0005NL
1CT:1
1CT:1
Down
J0C-0006NL
1CT:1
1CT:1
JV006I21NL
1CT:1
JV011I21NL
J3026G21DNL
3
JX30-0005NL
50-130 @ 60 Hz
MHz
1 MIN
Notes:
3
1. LEDs Left/Right:
G = green; Y = yellow.
2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T).
3. Extended Temperature: -40° to 85° C
RJ45 Durability Test Rating
Mating Force
(MAX)
Unmating Force
(MAX)
Durability
Part Number
Plug to Jack
Retention (MIN)
J0C/JV/J3 Series
5 Ibs./2.268 kgs.
5 Ibs./2.268 kgs.
750 Insertions
20 Ibs./9.072 kgs.
USA 858 674 8100
Germany 49 7032 7806 0
1
Singapore 65 6287 8998
pulseelectronics.com
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4356768
J409.N (05/13)
PulseJack™
Surface Mount 1x1
RJ45 Material Specification
Housing
Shield
Part
Number
Material
MSL2
Rating
Contact
Finish
Material
J0C/JV/J3
Brass
20-40µ inches thick
Phosphor
Series
nickel over Brass
Bronze
Notes:
1. Connector dimensions comply with FCC part 68 dimension requirements.
2. MSL = Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5
3. (X) = 30 inches gold for JV and J30 platforms and 15 inches gold for J0C platform.
Plating Area 3
Solder Area4
Material
Specification
(X)µ inches gold over
30-80µ inches nickel
Tin matte finish
High Temp.
Thermoplastic
UL 94 V-0
1
4. NL parts are tin matte finish over nickel.
J0C Platform Schematics
J0C-0005NL/J0C-0006NL
J0C-0003NL/J0C-0004NL
TD+ 1
1 TX+
TD+ 1
CT 4
CT 5
RD- 6
1:1
RECEIVE
6 RX4
5
NC 7
PCB SIDE TO PHY
3 RX+
RD+ 3
CABLE SIDE
PCB SIDE TO PHY
1:1
TRANSMIT
TD- 2
2 TX-
75
2 TX-
1:1
TRANSMIT
RD+ 3
3 RX+
CT 5
75
6 RX-
RD- 6
1:1
RECEIVE
NC 7
4
75
7
8
GND* 8
CABLE SIDE
CT 4
TD- 2
1 TX+
5
7
GND 8
75
8
NOTE: Connect GND to PCB ground.
2
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
JV Platform Schematics
JV011
J0C006
TD+ 2
CT 1
3 RX+
RD+ 4
CT 6
RD- 5
6 RX-
1:1
RECEIVE
TD- 3
2 TX-
1:1
TRANSMIT
3 RX+
RD+ 4
CABLE
2 TX-
1:1
TRANSMIT
CABLE
TD- 3
PCB SIDE TO PHY
CT 1
PCB SIDE TO PHY
1 TX+
TD+ 2
1 TX+
CT 6
RD- 5
6 RX-
1:1
RECEIVE
4
4
75Ω
5
75 Ω
7
5
75Ω
7
0.001µ
8
75Ω
75Ω
C1
SHIELD
8
JV026
1 TX+
TD+ 2
TD- 3
2 TX-
1:1
TRANSMIT
3 RX+
RD+ 4
CT 6
RD- 5
75 Ω
75 Ω
1:1
RECEIVE
75 Ω
3
pulseelectronics.com
6 RX4
5
7
0.001µ
C1
SHIELD
CABLE
PCB SIDE TO PHY
CT 1
8
75 Ω
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J3 Platform Schematics
J3011
J3026
CT 5
6 RX-
1:1
RECEIVE
3 RX+
RD+ 7
CT 6
6 RXRD- 8
1:1
RECEIVE
4
75 Ω
9
75 Ω
4
5
75 Ω
N/C 9
10
75 Ω
5
75 Ω
75 Ω
0.001µ
2 TX-
1:1
TRANSMIT
CABLE
CT 6
PCB SIDE TO PHY
3 RX+
RD+ 7
RD- 8
TD- 4
2 TX-
1:1
TRANSMIT
CABLE
PCB SIDE TO PHY
CT 5
TD- 4
1 TX+
TD+ 3
1 TX+
TD+ 3
7
75 Ω
7
8
0.001µ
10
75 Ω
8
C1
JX30-0005NL
1 TX+
TD+ 3
CT1
5
2 TX-
1:1
TRANSMIT
RD+ 7
3 RX+
6
RD- 8
CABLE
PCB SIDE TO PHY
TD- 4
CT2
6 RX-
1:1
RECEIVE
75 Ω
4
75 Ω
75 Ω
9
5
7
10
0.001µ
75 Ω
8
CT1
4
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J0C Platform Mechanicals
J0C-0004NL/06NL
EMI Fingers
EMI Fingers
5
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
JV Platform Mechanicals
JV Series
JV0XX121
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
6
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
J30XXGX1D
Date of Code
Country of Origin
JX30-0005NL
& J3026G21D
With EMI
Tabs
J30-0005NL
J3026G21D
Date of Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
7
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector
Magnetics Modules has been specifically designed for
the implementation of a 10Base-T and 100Base-TX
transmission over data-grade unshielded twisted pair
cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are
suitable for adapter card and multiport applications. Pulse
has worked closely with the leading IC manufacturers
in providing these 10/100 solutions, thereby assuring
compatibility with each transceiver.
The JC0 series meets the stringent open circuit
inductance requirements imposed by IEEE. When an 8mA
DC current is applied across the transformer windings, the
transformer will provide at least 350µH. The transformers
used in each module also provide 1500Vrms minimum
isolation, wide bandwidth with minimal attentuation and
fast rise times to minimize system level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse
are designed to meet all published specifications after
exposure to surface mount soldering temperatures.
The SMT are robust enough to withstand convection
and infrared reflow solder temperatures. Additionally,
compliant leads provide excellent solder-joint reliability
with a coplanarity of 0.10 (0.004”).
Note: Modules are packaged in trays, unless Tape & Reel
is specified (ex: J0C-0003NL for Trays and J0C-0003NLT
for Tape & Reel).
J0C-0003NL/04NL Connector
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to VCC and 50Ω
connections.
2. Connections to ground should be as short as possible.
8
pulseelectronics.com
3. Connections between the 10/100 IC and the
SMT connector should be direct (ideally no change
in direction) and of minimum length.
J409.N (05/13)
PulseJack™
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector
Magnetics Modules has been specifically designed for
the implementation of a 10Base-T and 100Base-TX
transmission over data-grade unshielded twisted pair
cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are
suitable for adapter card and multiport applications. Pulse
has worked closely with the leading IC manufacturers
in providing these 10/100 solutions, thereby assuring
compatibility with each transceiver.
The JC0 series meets the stringent open circuit
inductance requirements imposed by IEEE. When an 8mA
DC current is applied across the transformer windings, the
transformer will provide at least 350µH. The transformers
used in each module also provide 1500Vrms minimum
isolation, wide bandwidth with minimal attentuation and
fast rise times to minimize system level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse
are designed to meet all published specifications after
exposure to surface mount soldering temperatures.
The SMT are robust enough to withstand convection
and infrared reflow solder temperatures. Additionally,
compliant leads provide excellent solder-joint reliability
with a coplanarity of 0.10 (0.004”).
Note: Modules are packaged in trays, unless Tape & Reel is
specified. Please add the suffix “T” for Tape & Reel orders
(ex: JVO006121T). Add the suffix “NL” for RoHS compliant
parts (ex: JV006I21NLT for Trays and JV006I21NLT for
Tape & Reel).
JV006I21 Connector
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to VCC and 50Ω
connections.
2. Connections to ground should be as short as possible.
9
pulseelectronics.com
3. Connections between the 10/100 IC and the
SMT connector should be direct (ideally no change
in direction) and of minimum length.
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J0C Packaging Specifications
J0C Series
Tape and Reel Specification
Weight ..............7.07 grams
Tape & Reel ............ 90/reel
Tray ........................ 80/tray
Tape ................... 44x32mm
Tube ...................... 25/tube
Tray Specification
10
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
JV Packaging Specifications
JV Series
Tape and Reel Specification
Weight ................6.6 grams
Tape & Reel .......... 150/reel
Tray ........................ 45/tray
Tape ................... 44x32mm
Tray Specification
11
pulseelectronics.com
J409.N (05/13)
PulseJack™
Surface Mount 1x1
J3 Packaging Specifications
J3 Series
Tape and Reel Specification
Weight ................8.1 grams
Tape & Reel ............ 75/reel
Tray ........................ 45/tray
Tape ................... 56x32mm
Tray Specification
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Pulse Europe
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 858 674 8100
Tel: 49 7032 7806
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823
(Pulse)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2013. Pulse Electronics, Inc. All rights reserved.
12
pulseelectronics.com
J409.N (05/13)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Pulse:
J3026G01DNLT J3026G21DNL
Similar pages