ETC KNV108

KVM CPU Switch Boxes
Mulltii Port
Features:
•
•
•
•
•
•
•
•
•
Supports both PS/2 and serial mouse
Hot-key functions allow easy computer access
Plug and play system configuration
Cascade configuration expands system capability
High VGA resolution 1,920 × 1,440
Auto-scan automatically selects computers sequentially
Operating system independent, transparent to all
applications
Keyboard and mouse can be hot plugged at any time
Keyboard states automatically saved and restored when
switching computers
One-Console KVM CPU Switches
The KVM CPU Switch Boxes allows you to access multiple computers from one keyboard, mouse and monitor. There is no interface
card or software to configure. Installation is as easy as connecting cables between the CPU Switch and your computers. Operation is
as simple as pressing buttons or entering hot-key commands. The KVM CPU Switch is independent of computer operating systems,
allowing the attached computers to run different applications
Specification Table
Number of Console Supported
Number of PC Supported
Part Number
1
4
KVM510
1
8
KNV108
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
Page <1>
23/06/12 V1.1