PRODUCT SPECIFICATION DATE：01/04/2013 cosmo ELECTRONICS CORPORATION Photocoupler： KTLP260J NO. 61P43004 SHEET 1 OF 6 REV. 4 Mini-flat package Optoisolators Triac Drive Output ( 600V Volts Peak ) Features 1. Pb free and RoHS compliant. 2. Opaque type,mini-flat package. 3. Subminiature type (The volume is smaller than that of our conventional DIP type by as far as 30%). 4. Isolation voltage between input and output (Viso：3750Vrms). 5. Safety Approval： UL approved：UL1577 , No.E169586 CUL approved：C22.2 No.1 & NTC No.5 , No.E169586 VDE approved：EN60747-5-2 , No.40009235 CQC approved：GB8898 / GB4943 CQC10001049555、CQC08001022986 For 115/240 Vac(rms) Application： 1. 2. 3. 4. 5. 6. 7. 8. 9. Solenoid/Valve Controls. Lighting Controls. Static Power Switches. AC Motor Drives. Temperature Controls. E.M. Contactors. AC Motor Staters. Solid State Relays. Programmable controllers. PRODUCT SPECIFICATION DATE：01/04/2013 NO. 61P43004 Photocoupler： cosmo KTLP260J ELECTRONICS CORPORATION SHEET 2 OF 6 REV. 4 Outside dimension：Unit ( mm ) Date Code 2.30 0.1±0.1 3.60 4.40 0.40 0.50±0.3 2.54 7.00±0.4 Tolerance：±0.2mm Schematic：Top View 1 4 2 3 1. Anode 2. Cathode 3. MAIN TERMINAL 4. MAIN TERMINAL PRODUCT SPECIFICATION DATE：01/04/2013 NO. 61P43004 Photocoupler： cosmo ELECTRONICS CORPORATION KTLP260J REV. 4 SHEET 3 OF 6 Absolute Maximum Ratings Parameter Input Output Symbol Rating Unit Forward current IF 50 mA Peak forward current (100us) IFP 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Off-State Output Terminal voltage VDRM 600 V On-State R.M.S. Current IT(RMS) 70 mA ITSM 1 A PD 150 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 3750 Vrms Operating temperature Topr -40 to +115 ℃ Storage temperature Tstg -50 to +125 ℃ Soldering temperature 10 second Tsol 260 ℃ Peak Repetitive Surget Current (PW=10ms.DC 10%) Power dissipation Electro-optical Characteristics Parameter Input Symbol Conditions Forward voltage VF IF = 10mA - 1.2 1.4 V Peak forward voltage VFM IFM = 0.5A - - 3.5 V IR VR = 5V - - 10 μA Peak Blocking Current IDRM VDRM = 600V - - 1.0 μA On-State Voltage VTM ITM = 70mA - 1.6 2.8 V Holding Current IH - 1.0 100 - Reverse current Output Critical rate of rise of Transfer Off-state voltage charac- Isolation resistance teristics Minimum trigger current Tunr-on time MIN. TYP. MAX. Unit dV/dt VDRM = (1/ 2 )‧Rated Riso DC500V IFT Main Terminal Voltage=3V - Ton VD = 6V, RL=100 ohm, IF=20mA - mA - V/μs - Ω 5 10 mA - 100 μS 5×1010 1011 PRODUCT SPECIFICATION DATE：01/04/2013 NO. 61P43004 Photocoupler： cosmo KTLP260J ELECTRONICS CORPORATION 40 30 20 10 0 0 25 75 100 115 100 80 70 60 40 20 0 -30 0 25 50 75 100 115 Ambient Temperature Ta ( ℃ ) Ambient Temperature Ta ( ℃ ) On-State R.M.S. Current vs. Ambient Temperature Total Power Dissipation vs. Ambient Temperature 80 70 60 40 20 0 -30 0 25 55 75 100 115 200 150 100 50 0 -30 0 25 50 75 100 115 Ambient temperature Ta (℃) Ambient temperature Ta (℃) Peak Forward Current vs. Duty Ratio Forward Current vs. Forward Voltage 10000 Trigger Current IFT ( mA ) 55 Total power dissipation Pc (mW) On-State R.M.S. Current(mA) -30 Diode power dissipation P (mW) 50 Diode Power Dissipation vs. Ambient Temperature Pulse width <=100us Ta=25°C Forward current IF (mA) Forward current IF ( mA ) Forward Current vs. Ambient Temperature SHEET 4 OF 6 1000 100 0 -3 10 -2 10 Duty ratio -1 10 1 500 200 Ta=75° 50° 100 50 25° 0° -25° 20 10 5 2 1 0 0.5 1.0 1.5 2.0 2.5 Forward voltage VF (V) 3.0 REV. 4 PRODUCT SPECIFICATION DATE：01/04/2013 NO. 61P43004 Photocoupler： cosmo KTLP260J ELECTRONICS CORPORATION On-State Characteristics On-State Current(mA) +300 Leakage with LED off vs. Ambient Temperature 500 Output Pulse Width 80us IF=30mA,f=60Hz,Ta=25°C Peak Blocking Current IDRM (nA) +400 +200 +100 0 -100 -200 -300 -400 -3 -2 -1 0 +1 +2 +3 On-State Voltage( V ) IFT ,Normalized Trigger Current vs. Ambient Temperature 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 Normalized To Ta=25°C -40 -20 0 20 40 60 SHEET 5 OF 6 80 100 115 Ambient Temperature Ta ( ℃ ) 200 IF=0,VDRM=Rated 100 50 20 10 5 -40 -20 0 20 40 60 80 100 115 Ambient Temperature Ta ( ℃ ) REV. 4 PRODUCT SPECIFICATION DATE：01/04/2013 cosmo ELECTRONICS CORPORATION Photocoupler： KTLP260J NO. 61P43004 SHEET 6 OF 6 NOTICE The information contained in this document is intended to be a general product description and is subject to change without notice. Please contact cosmo in order to obtain the latest device data sheets before using any cosmo device. cosmo does not assume any responsibility for use of any circuitry described. No circuit patent licenses are implied. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or by any means, or transferred to any third party without the prior written consent of cosmo Electronics Corporation. The devices listed in this document are designed for general applications only in electronic equipment. No devices shall be deployed which require higher level of reliability such as： – – – – Medical and other life support equipments. Space application. Telecommunication equipment ( trunk lines ). Nuclear power control equipment. Unless it received prior written approval from cosmo. cosmo takes no responsibility for damages arise form the improper usage of our device. Please contact cosmo for further information regarding the above notices. REV. 4