ETC KVR333X72RC25/1GD

Memory Module Specification
KVR333X72RC25/1GD
1GB 128M x 72-Bit DDR333 Registered
CL2.5 ECC 184-Pin DIMM
DESCRIPTION:
This document describes ValueRAM's 128M x 72-bit 1GB (1024MB) DDR333 CL2.5 SDRAM
(Synchronous DRAM) Registered ECC memory module. The components on this module
include eighteen 64M x 8-bit (16M x 8-Bit x 4 bank) DDR333 SDRAM in TSOP packages and
three 16-bit drivers in TSSOP packages. This 184-pin DIMM uses gold contact fingers and
requires +2.5V. The electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK)
Row Cycle Time (tRC)
Refresh Row Cycle Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power (IDD0)
UL Rating
6ns (min.) / 12ns (max.)
60ns (min.)
72ns (min.)
42ns (min.) / 70,000ns (max.)
+2.5V (+/- .2V)
5.625 W operating
94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.200" (30.48mm).
Units : Inches (Millimeters)
1.200”
(30.48)
(17.80)
0.700”
0.393”
(10.00)
0.250
(6.350)
0.157
(4.00)
0.1496
(3.80)
2.175
0.071
(1.80)
0.100
0.26
(6.62)
(2.50 )
2.886”
(73.30)
5.250”
(133.35)
1
0.000”
(00.00)
0.000”
(00.00)
0.118
(3.00)
0.039 ± 0.002
(1.000 ± 0.050)
0.0787
(2.00)
0.0078 ±0.006
(0.20 ±0.15)
0.050
(1.270)
0.1575
(4.00)
Figure 1: KVR333X72RC25/1GD 184-Pin DIMM
Document No. VALUERAM0354-001.B00
07/14/04