Memory Module Specification KVR333X72RC25/512 512MB 64M x 72-Bit DDR333 CL2.5 Registered 184-Pin ECC DIMM DESCRIPTION: This document describes ValueRAM's 64M x 72-bit (512MB) DDR333 CL2.5 SDRAM (Synchronous DRAM) Registered ECC memory module. The components on this module include eighteen 64M x 4-bit (16M x 4-Bit x 4 Bank) DDR333 SDRAM in TSOP packages and three 16-bit drivers in TSSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) Row Cycle Time (tRC) Refresh Row Cycle Time (tRFC) Row Active Time (tRAS) Single Power Supply of Power (IDD0) UL Rating 6ns (min.) / 12ns (max.) 60ns (min.) 72ns (min.) 42ns (min.) / 70,000ns (max.) +2.5V (+/- .2V) 7.225 W (operating) 94 V - 0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.200" (30.48mm). Figure 1: KVR333X72RC25/512 184-Pin DIMM Part No. VALUERAM0314-001.B00 07/14/04