KW1-361 SERIES LED Numeric Display Single Digit (0.36") DESCRIPTION: PACKAGE DIMENSIONS The KW1-361 series is 0.36 inch (9.10mm) height single digit display with right DP designed for viewing distances of up to three meters. This series is suitable for use in instruments, point of sales terminals and electrical appliances. All devices are available as either common anode or common cathode. 4.80 o 5 0.80 + A F 14.00 9.10(0.36") PIN 1 G C E D o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) B DP 7.50 8.50 Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC φ0.45 5.08 NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. 2.54*4=10.16 INTERNAL CIRCUIT DIAGRAM 1, 6 1, 6 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A B C D E F G DP 10 9 8 5 4 2 3 A B C D E F G DP 7 10 9 8 5 4 2 3 7 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Wave C.C or C.A Electro-optical Data(at 10mA) Absolute Maximum Ratings ∆λ Pd If 635 45 100 50 100 1.7 1.9 2.6 10-20 700 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 Super Green 570 30 100 50 100 1.7 2.2 2.6 10-20 850 1900 GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 600 1500 KW1-361C3 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 1.7 1.9 2.6 10-20 700 1800 KW1-361CS GaAlAs Super Red 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 Part No. Raw Material Emitted Color KW1-361A3 GaAsP/GaP Hi-Eff. Red KW1-361AS GaAlAs Super Red GaP Green KW1-361AG GaP KW1-361A6 KW1-361A2 KW1-361C2 Common Anode Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 1800 Common GaP Green Cathode KW1-361CG GaP Super Green 570 30 100 50 100 1.7 2.2 2.6 10-20 850 1900 KW1-361C6 GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 600 1500 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).