Littelfuse L4008N856 8 amp sensitive, standard & alternistor (high commutation) triac Datasheet

Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx08xx & Qxx08xx & Qxx08xHx Series
®
Description
8 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Sensitive type devices guarantee gate control in Quadrants
I & IV needed for digital control circuitry.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Agency Approval
Agency
Features & Benefits
• RoHS compliant
Agency File Number
• Glass – passivated
junctions
L Package: E71639
®
• Voltage capability up
to 1000 V
Main Features
Symbol
IT(RMS)
VDRM /VRRM
IGT (Q1)
Value
Unit
8
A
400 to 1000
V
5 to 50
mA
• Surge capability up
to 100 A
• Electrically isolated
“L-Package” is UL
recognized for 2500Vrms
• Solid-state switching
eliminates arcing or
Schematic Symbol
contact bounce that
create voltage transients
• No contacts to wear out
from reaction of switching
events
• Restricted (or limited) RFI
generation, depending on
activation point of
sine wave
• Requires only a small gate
activation pulse in each
half-cycle
Applications
MT2
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
MT1
Typical applications are AC solid-state switches, light
dimmers, power tools, home/brown goods and white
goods appliances.
G
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Lxx08xx & Qxx08xx & Qxx08xHx Series
75
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — Sensitive Triac (4 Quadrants)
Symbol
Parameter
RMS on-state current (full sine wave)
IT(RMS)
ITSM
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
I2t
I2t Value for fusing
Lxx08Ly
TC = 80°C
Lxx08Ry / Lxx08Vy / Lxx08Dy
TC = 85°C
Value
Unit
8
A
f = 50 Hz
t = 20 ms
65
f = 60 Hz
t = 16.7 ms
85
tp = 8.3 ms
A
26.5
A2s
di/dt
Critical rate of rise of on-state current
IG = 50mA with 0.1µs rise time
f = 120 Hz
TJ = 110°C
70
A/μs
IGTM
Peak gate trigger current
tp ≤ 10 μs
TJ = 110°C
1.6
A
PG(AV)
Average gate power dissipation
TJ = 110°C
0.4
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
Tstg
TJ
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard Triac
Symbol
Parameter
RMS on-state current (full sine wave)
IT(RMS)
ITSM
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
I 2t
I2t Value for fusing
Unit
8
A
Qxx08Ry / Qxx08Ny
TC = 95°C
Qxx08Ly
TC = 90°C
f = 50 Hz
t = 20 ms
83
f = 60 Hz
t = 16.7 ms
100
A2s
TJ = 125°C
70
A/μs
TJ = 125°C
1.8
A
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Critical rate of rise of on-state current
IG = 200mA with ≤ 0.1µs rise time
IGTM
Peak gate trigger current
PG(AV)
Average gate power dissipation
Tstg
tp = 8.3 ms
A
41
di/dt
TJ
Value
f = 120 Hz
tp ≤ 10 μs;
IGT ≤ TGTM
Note: xx = voltage, y = sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
76
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — Alternistor (3 Quadrants)
Symbol
Parameter
RMS on-state current (full sine wave)
IT(RMS)
Qxx08LHy
TC = 90°C
Qxx08RHy / Qxx08NHy
Qxx08VHy / Qxx08DHy
TC = 95°C
f = 50 Hz
ITSM
t = 20 ms
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
f = 60 Hz
I2t
I2t Value for fusing
di/dt
tp = 8.3 ms
Critical rate of rise of on-state current
tP ≤ 10 μs;
IGT ≤ IGTM
Average gate power dissipation
PG(AV)
8
A
Qxx08VHy /
Qxx08DHy
80
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
83
Qxx08VHy /
Qxx08DHy
85
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
100
Qxx08VHy /
Qxx08DHy
30
A
A 2s
41
TJ = 125°C
70
Qxx08VHy /
Qxx08DHy
1.6
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
2.0
IGT = 10mA
Qxx08VHy /
Qxx08DHy
0.4
IGT = 35mA
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
TJ = 125°C
TJ = 125°C
A/μs
A
W
0.5
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Tstg
TJ
Unit
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
f = 120 Hz
Peak gate trigger current
IGTM
t = 16.7 ms
Value
Note: xx = voltage, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants)
Symbol
IGT
Test Conditions
Quadrant
VD = 12V RL = 60 Ω
VGT
VGD
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IH
IT = 100mA
dv/dt
VD = VDRM Gate Open TJ = 100°C
(dv/dt)c
(di/dt)c = 4.3 A/ms TJ = 110°C
tgt
IG = 100mA PW = 15µs IT = 11.3 A(pk)
Lxx08x6
Lxx08x8
Unit
5
10
10
20
mA
I – II – III
IV
MAX.
ALL
MAX.
1.3
V
ALL
MIN.
0.2
V
MAX.
400V
600V
10
20
mA
30
40
20
30
TYP.
2
2
V/μs
TYP.
3.0
3.2
μs
TYP.
V/μs
Note: xx = voltage, x = package, y = sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
77
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac
Symbol
IGT
Test Conditions
Quadrant
VD = 12V RL = 60 Ω
VGT
VGD
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IH
IT = 200mA
Qxx08x4
Qxx08x5
Unit
25
50
50
75
mA
I – II – III
IV
MAX.
TYP.
I – II – III
MAX.
1.3
V
ALL
MIN.
0.2
V
MAX.
50
400V
dv/dt
600V
VD = VDRM Gate Open TJ = 125°C
800V
50
mA
150
125
MIN.
V/μs
100
1000V
80
(dv/dt)c
(di/dt)c = 4.3 A/ms TJ = 125°C
TYP.
4
4
V/μs
tgt
IG = 100mA PW = 15µs IT = 11.3 A(pk)
TYP.
3.0
3.0
μs
Qxx08xH3
Qxx08xH4
Unit
10
35
mA
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants)
Symbol
IGT
Test Conditions
Quadrant
VD = 12V RL = 60 Ω
VGT
VGD
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IH
IT = 100mA
I – II – III
MAX.
I – II – III
MAX.
1.3
V
I – II – III
MIN.
0.2
V
MAX.
Qxx08LHy /
Qxx08RHy /
Qxx08NHy
dv/dt
VD = VDRM Gate Open TJ = 125°C
MIN.
Qxx08VHy /
Qxx08DHy
15
35
400V
75
400
600V
50
300
800V
200
1000V
100
400V
75
450
600V
50
350
800V
250
1000V
150
mA
V/μs
(dv/dt)c
(di/dt)c = 4.3 A/ms TJ = 125°C
MIN.
20
25
V/μs
tgt
IG = 100mA PW = 15µs IT = 11.3 A(pk)
TYP.
4.0
4.0
μs
Note : xx = voltage, x = package, y = sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
78
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Static Characteristics
Symbol
Test Conditions
ITM = 11.3A tp = 380 µs
VTM
Lxx08xy
Qxx08xy
IDRM
VDRM = VRRM
IRRM
Unit
1.60
V
TJ = 25°C
400 - 600V
20
μA
TJ = 110°C
400 - 600V
0.5
mA
TJ = 25°C
400 - 1000V
50
μA
TJ = 125°C
400 - 800V
2
TJ = 100°C
1000V
MAX.
mA
3
400 - 800V
10
1000V
20
TJ = 125°C
400 - 800V
2
TJ = 100°C
1000V
3
TJ = 25°C
Qxx08xHy
MAX.
Value
μA
mA
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Value
L/Qxx08Ryy /
L/Qxx08Nyy
1.5
L/Qxx08Lyy
2.8
L/Qxx08Vyy
2.1
L/Qxx08Ryy
45
L/Qxx08Lyy
50
L/Qxx08Vyy
64
Unit
°C/W
°C/W
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Figure 2: N
ormalized DC Gate Trigger Current for
All Quadrants vs. Junction Temperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
+
(+)
I GT
GATE
MT1
I GT
REF
(-)
MT1
I GT
GATE
(+)
MT1
REF
REF
QII QI
QIII QIV
MT2
3.0
IGT
I GT
GATE
3.5
MT2
-
+ IGT
MT2
2.5
2.0
1.5
1.0
0.5
I GT
GATE
MT2 NEGATIVE
(Negative Half Cycle)
IGT (TJ = 25°C)
(-)
MT2 POSITIVE
(Positive Half Cycle)
Ratio of
MT2
0.0
-65
MT1
-40
-15
10
35
60
85
110
Junction Temperature (TJ)- ºC
REF
NOTE: Alternistors will not operate in QIV
Note: Alternistors will not operate in QIV
Lxx08xx & Qxx08xx & Qxx08xHx Series
79
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
125
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 4: N
ormalized DC Gate Trigger Voltage for
All Quadrants vs. Junction Temperature
3.5
2.0
VGT
2.0
1.5
VGT (TJ = 25°C)
2.5
1.5
1.0
Ratio of
IH
Ratio of
IH (TJ = 25°C)
3.0
1.0
0.5
0.5
0.0
0.0
-65
-40
-15
10
35
60
85
110
-65
125
-40
-15
35
60
85
110
125
Figure 6: M
aximum Allowable Case Temperature
vs. On-State Current (Sensitive Triac)
18
110
16
105
Lxx08Vy
Lxx08Dy
Lxx08Ry
100
14
Maximum Allowable
Case Temperature (TC) - °C
Average On-State
Power Dissipation (PD(AV)) - Watts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
12
10
8
6
4
95
90
Lxx08Ly
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
CASE TEMPERATURE: Measured as shown on
Dimensional Drawings
75
70
65
2
60
0
0
2
4
6
8
10
0
1
2
RMS On-State Current (IT(RMS)) - Amps
3
4
5
6
7
8
RMS On-State Current (IT(RMS)) - Amps
Figure 7: M
aximum Allowable Case Temperature
vs. On-State Current (Standard / Alternistor Triac)
Figure 8: O
n-State Current vs. On-State Voltage
(Typical)
20
Postitive or Negative Instantaneous
On-State Current (iT) - Amps
130
Qxx08Ryy
Qxx08Nyy
Qxx08Vyy
Qxx08Dyy
120
Maximum Allowable
Case Temperature (TC) - °C
10
Junction Temperature (TJ)- ºC
Junction Temperature (TJ)- ºC
110
100
Qxx08Lyy
90
80
70
TC = 25°C
16
12
8
4
0
60
0
1
2
3
4
5
6
7
8
0.6
0.8
1.0
1.2
1.4
Postitive or Negative Instantaneous
On-State Voltage (vT) - Volts
RMS On-State Current (IT(RMS)) - Amps
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
80
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1.6
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Figure 9: Maximum Allowable Ambient Temperature vs. On-State Current
Maximum Allowable
Ambient Temperature (TA) - °C
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive CONDUCTION
ANGLE: 360
FREE AIR RATING - NO HEATSINK
100
80
L/Qxx08Lyy
L/Qxx08Ryy
60
L/Qxx08Vyy
40
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
RMS On-State Current (IT(RMS)) - Amps
Figure 10: Surge Peak On-State Current vs. Number of Cycles
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Peak Surge (Non-Repetitive)
On-State Current (ITSM) - Amps
L/Qxx08Ryy
L/Qxx08Lyy
L/Qxx08Nyy
L/Qxx08Vyy
L/Qxx08Dyy
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
1000
Surge Current Duration- Full Cycles
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
81
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
Time
Environmental Specifications
Test
100% Matte Tin-plated
AC Blocking (VDRM)
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Terminal Material
Copper Alloy
Temperature Cycling
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
Lxx08xx & Qxx08xx & Qxx08xHx Series
Ramp-do
Ramp-down
82
Revised: June 24, 2011 04:57 PM
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
O
A
E
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
P
MT2
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
K
N
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
MT1 MT2 GATE
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
Dimension
8.13
.320
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
K
N
J
MT1 MT2 GATE
Lxx08xx & Qxx08xx & Qxx08xHx Series
M
Inches
AREA (REF.) 0.17 IN2
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
83
Revised: June 24, 2011 04:57 PM
Millimeters
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount
TC MEASURING POINT
B
AREA: 0.11 IN2
C
V
Dimension
E
MT2
7.01
.276
A
8.41
.331
S
W
U
MT1
G
J
K
GATE
8.13
.320
H
D
F
11.68
.460
2.16
.085
7.01
.276
7.01
.276
16.89
.665
8.89
.350
1.40
.055
3.81
.150
Inches
Min
Millimeters
Max
Min
Max
A
0.360
0.370
9.14
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.64
0.89
E
0.045
0.060
1.14
1.52
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.092
0.102
2.34
2.59
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.88
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
2.03
.080
6.60
.260
Dimensions — TO-251AA (V-Package) — V-PAK Through Hole
TC MEASURING POINT
MT2
E
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
MT1
MT2
GATE
F
L
G
I
Lxx08xx & Qxx08xx & Qxx08xHx Series
84
Revised: June 24, 2011 04:57 PM
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.040
0.044
0.050
1.02
1.11
1.27
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.038
0.040
0.044
0.97
1.01
1.12
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
MT2
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
6.71
.264
5.34
.210
C
P
Q
MT1
GATE
F
MT2
1.60
.063
1.80
.071
AREA : 0.040 IN2
3
.118
G
4.60
.181
I
O L
K
J
H
M
N
Lxx08xx & Qxx08xx & Qxx08xHx Series
85
Revised: June 24, 2011 04:57 PM
Millimeters
Typ
Max
Min
Typ
Max
A
0.040
0.043
0.050
1.02
1.09
1.27
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
A
B
Inches
Min
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.038
0.040
0.044
0.97
1.02
1.12
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Product Selector
Part Number
Voltage (xx)
Gate Sensitivity Quadrants
Type
Package
10 mA
Sensitive Triac
TO-220L
5 mA
10 mA
Sensitive Triac
TO-252 D-PAK
X
5mA
10mA
Sensitive Triac
TO-220R
X
X
5 mA
10 mA
Sensitive Triac
TO-251 V-PAK
Lxx08L8
X
X
10 mA
20 mA
Sensitive Triac
TO-220L
Lxx08D8
X
X
10 mA
20 mA
Sensitive Triac
TO-252 D-PAK
Lxx08R8
X
X
10mA
20mA
Sensitive Triac
TO-220R
Lxx08V8
X
X
10 mA
20 mA
Sensitive Triac
TO-251 V-PAK
Qxx08RH3
X
X
10 mA
Alternistor Triac
TO-220R
Qxx08VH3
X
X
10 mA
Alternistor Triac
TO-251 V-PAK
Qxx08DH3
X
X
10 mA
Alternistor Triac
TO-252 D-PAK
Qxx08L4
X
25 mA
Triac
TO-220L
Qxx08R4
X
25 mA
Triac
TO-220R
Qxx08N4
X
25 mA
Triac
TO-263 D²-PAK
Qxx08LH4
X
X
X
X
35 mA
Alternistor Triac
TO-220L
Qxx08RH4
X
X
X
X
35 mA
Alternistor Triac
TO-220R
Qxx08VH4
X
X
X
X
35 mA
Alternistor Triac
TO-251 V-PAK
Qxx08DH4
X
X
X
X
35 mA
Alternistor Triac
TO-252 D-PAK
Qxx08NH4
X
X
X
X
35 mA
Alternistor Triac
TO-263 D²-PAK
Qxx08L5
X
X
X
50 mA
Triac
TO-220L
Qxx08R5
X
X
X
50 mA
Triac
TO-220R
Qxx08N5
X
X
X
50 mA
Triac
TO-263 D²-PAK
400V
600V
Lxx08L6
X
Lxx08D6
800V
1000V
I – II – III
IV
X
5 mA
X
X
Lxx08R6
X
Lxx08V6
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
L/Qxx08L/Ryy
L/Qxx08L/Ryy
2.2 g
Bulk
500
L/Qxx08L/RyyTP
L/Qxx08L/Ryy
2.2 g
Tube Pack
500 (50 per tube)
Qxx08NyyTP
Qxx08Nyy
1.6 g
Tube
500 (50 per tube)
Qxx08NyyRP
Qxx08Nyy
1.6 g
Embossed Carrier
500
L/Qxx08DyyTP
L/Qxx08Dyy
0.3 g
Tube
750 (75 per tube)
L/Qxx08DyyRP
L/Qxx08Dyy
0.3 g
Embossed Carrier
2500
L/Qxx08VyyTP
L/Qxx08Vyy
0.4 g
Tube
750 (75 per tube)
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Lxx08xx & Qxx08xx & Qxx08xHx Series
86
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
* Cover tape
0.315
(8.0)
MT1
XXXXXX
DC
0.059
Dia
(1.5)
XX
DC
XX
XXXXXX
*
XX
0.524
(13.3)
XXXXXX
0.63
(16.0)
DC
Gate
XXXXXX
0.157
(4.0)
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
0.059
DIA
(1.5)
0.945
(24.0)
0.827
(21.0)
Gate
MT1
*
* Cover tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Lxx08xx & Qxx08xx & Qxx08xHx Series
87
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Part Numbering System
Part Marking System
Q 60 08 L 5 56
CURRENT
08: 8A
SENSITIVITY & TYPE
Sensitive Triac:
6 : 5 mA (QI, II, III)
10 mA (QIV)
8 : 10 mA (QI, II, III)
20 mA (QIV)
Standard Triac:
4 : 25 mA (QI, II, III)
5 : 50 mA (QI, II, III)
Alternistor Triac:
H3 : 10 mA (QI, II, III)
H4 : 35 mA (QI, II, III)
Q6008R5
YM
®
®
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
YMLDD
LEAD FORM DIMENSIONS
xx : Lead Form Option
®
Q6008L5
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
N : TO-263 (D2PAK)
V : TO-251 (VPAK)
D : TO-252 (DPAK)
MY
®
®
Lxx08xx & Qxx08xx & Qxx08xHx Series
88
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
L6008V5
DEVICE TYPE
L : Sensitive Triac
Q : Triac or Alternistor
TO-252AA – (D Package)
TO-251AA – (V Package)
Similar pages