STMicroelectronics L7906C Negative voltage regulator Datasheet

L7900 series
Negative voltage regulators
Feature summary
■
Output current up to 1.5A
■
Output voltages of -5; -6; -8; -12; -15; -18; -20;
-24V
■
Thermal overload protection
■
Short circuit protection
■
Output transition SOA protection
TO-220
TO-220FP
Description
The L7900 series of three-terminal negative
regulators is available in TO-220, TO-220FP, TO-3
and D2PAK packages and several fixed output
voltages, making it useful in a wide range of
applications. These regulators can provide local
on-card regulation, eliminating the distribution
problems associated with single point regulation;
furthermore, having the same voltage option as
the L7800 positive standard series, they are
particularly suited for split power supplies. If
adequate heat sinking is provided, they can
deliver over 1.5A output current.
D2PAK
TO-3
Although designed primarily as fixed voltage
regulators, these devices can be used with
external components to obtain adjustable
voltages and currents.
Schematic diagram
January 2007
Rev. 11
1/24
www.st.com
24
L7900 series
Contents
1
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Test circuit
4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7
Order code
8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2/24
................................................ 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
L7900 series
Pin configuration
1
Pin configuration
Figure 1.
Pin connections (top view)
TO-220
D2PAK (Any Type)
TO220FP
TO-3
3/24
Maximum ratings
L7900 series
2
Maximum ratings
Table 1.
Absolute maximum ratings
Symbol
Parameter
Value
for VO= 5 to 18V
-35
for VO= 20, 24V
-40
Unit
VI
DC Input voltage
IO
Output current
Internally Limited
PD
Power dissipation
Internally Limited
TSTG
Storage temperature range
TOP
Operating junction temperature range
V
-65 to 150
°C
0 to 150
°C
Note:
Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these condition is not implied
Table 2.
Thermal Data
Symbol
Parameter
RthJC
Thermal resistance junction-case
RthJA
Thermal resistance junction-ambient
4/24
D2PAK
TO-220
TO-220FP
TO-3
Unit
3
3
5
4
°C/W
62.5
50
60
35
°C/W
L7900 series
3
Test circuit
Figure 2.
Test circuit
Test circuit
5/24
Electrical characteristics
L7900 series
4
Electrical characteristics
Table 3.
Electrical characteristics of L7905C (refer to the test circuits, TJ = 0 to 125°C, VI = -10V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-4.8
-5
-5.2
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -8 to -20 V
-4.75
-5
-5.25
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -7 to -25 V, TJ = 25°C
100
VI = -8 to -12 V, TJ = 25°C
50
IO = 5 mA to 1.5 A, TJ = 25°C
100
IO = 250 to 750 mA, TJ = 25°C
50
TJ = 25°C
3
mV
mV
IO = 5 mA to 1 A
0.5
VI = -8 to -25 V
1.3
mA
mA
Output voltage drift
IO = 5 mA
-0.4
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
100
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.4
V
Isc
Short circuit current
2.1
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
6/24
L7900 series
Table 4.
Symbol
Electrical characteristics
Electrical characteristics of L7906C (refer to the test circuits, TJ = 0 to 125°C, VI = -11V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-5.75
-6
-6.25
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -9.5 to -21.5 V
-5.7
-6
-6.3
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -8.5 to -25 V, TJ = 25°C
120
VI = -9 to -15 V, TJ = 25°C
60
IO = 5 mA to 1.5 A, TJ = 25°C
120
IO = 250 to 750 mA, TJ = 25°C
60
TJ = 25°C
3
mV
mV
IO = 5 mA to 1 A
0.5
VI = -9.5 to -25 V
1.3
mA
mA
Output voltage drift
IO = 5 mA
-0.6
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
144
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.4
V
Isc
Short circuit current
2
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Table 5.
Symbol
Electrical characteristics of L7908C (refer to the test circuits, TJ = 0 to 125°C, VI = -14V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-7.7
-8
-8.3
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -11.5 to -23 V
-7.6
-8
-8.4
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -10.5 to -25 V, TJ = 25°C
160
VI = -11 to -17 V, TJ = 25°C
80
IO = 5 mA to 1.5 A, TJ = 25°C
160
IO = 250 to 750 mA, TJ = 25°C
80
TJ = 25°C
3
mV
mV
IO = 5 mA to 1 A
mA
0.5
mA
VI = -11.5 to -25 V
1
Output voltage drift
IO = 5 mA
-0.6
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
175
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.1
V
Isc
Short circuit current
1.5
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
7/24
Electrical characteristics
Table 6.
Symbol
L7900 series
Electrical characteristics of L7912C (refer to the test circuits, TJ = 0 to 125°C, VI = -19V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-11.5
-12
-12.5
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -15.5 to -27 V
-11.4
-12
-12.6
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -14.5 to -30 V, TJ = 25°C
240
VI = -16 to -22 V, TJ = 25°C
120
IO = 5 mA to 1.5 A, TJ = 25°C
240
IO = 250 to 750 mA, TJ = 25°C
120
mV
mV
TJ = 25°C
3
IO = 5 mA to 1 A
0.5
VI = -15 to -30 V
1
mA
mA
Output voltage drift
IO = 5 mA
-0.8
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
200
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.1
V
Isc
Short circuit current
1.5
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Table 7.
Symbol
Electrical characteristics of L7915C (refer to the test circuits, TJ = 0 to 125°C, VI = -23V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-14.4
-15
-15.6
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -18.5 to -30 V
-14.3
-15
-15.7
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -17.5 to -30 V, TJ = 25°C
300
VI = -20 to -26 V, TJ = 25°C
150
IO = 5 mA to 1.5 A, TJ = 25°C
300
IO = 250 to 750 mA, TJ = 25°C
150
mV
mV
TJ = 25°C
3
IO = 5 mA to 1 A
mA
0.5
mA
VI = -18.5 to -30 V
1
Output voltage drift
IO = 5 mA
-0.9
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
250
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.1
V
Isc
Short circuit current
1.3
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
8/24
L7900 series
Table 8.
Symbol
Electrical characteristics
Electrical characteristics of L7918C (refer to the test circuits, TJ = 0 to 125°C, VI = -27V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VO
Output voltage
TJ = 25°C
-17.3
-18
-18.7
V
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -22 to -33 V
-17.1
-18
-18.9
V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
VI = -21 to -33 V, TJ = 25°C
360
VI = -24 to -30 V, TJ = 25°C
180
IO = 5 mA to 1.5 A, TJ = 25°C
360
IO = 250 to 750 mA, TJ = 25°C
180
3
IO = 5 mA to 1 A
0.5
VI = -22 to -33 V
1
IO = 5 mA
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
Supply voltage rejection
∆VI = 10 V, f = 120Hz
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
Isc
Short circuit current
SVR
mV
TJ = 25°C
Output voltage drift
eN
mV
mA
mA
54
-1
mV/°C
300
µV
60
dB
1.1
V
1.1
A
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Table 9.
Symbol
Electrical characteristics of L7920C (refer to the test circuits, TJ = 0 to 125°C, VI = -29V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
VO
Output voltage
TJ = 25°C
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -24 to -35 V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
Min.
Typ.
Max.
Unit
-19.2
-20
-20.8
V
-19
-20
-21
V
VI = -23 to -35 V, TJ = 25°C
400
VI = -26 to -32 V, TJ = 25°C
200
IO = 5 mA to 1.5 A, TJ = 25°C
400
IO = 250 to 750 mA, TJ = 25°C
200
mV
mV
TJ = 25°C
3
IO = 5 mA to 1 A
0.5
VI = -24 to -35 V
1
mA
mA
Output voltage drift
IO = 5 mA
-1.1
mV/°C
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
350
µV
Supply voltage rejection
∆VI = 10 V, f = 120Hz
60
dB
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
1.1
V
Isc
Short circuit current
0.9
A
eN
SVR
54
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
9/24
Electrical characteristics
Table 10.
Symbol
L7900 series
Electrical characteristics of L7924C (refer to the test circuits, TJ = 0 to 125°C, VI = -33V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified)
Parameter
Test conditions
VO
Output voltage
TJ = 25°C
VO
Output voltage
IO = -5 mA to -1 A, PO ≤15 W
VI = -27 to -38 V
∆VO(1)
Line regulation
∆VO(1)
Load regulation
Id
∆Id
∆VO/∆T
Quiescent current
Quiescent current change
Max.
Unit
-23
-24
-24.5
V
-22.8
-24
-25.2
V
480
VI = -30 to -36 V, TJ = 25°C
240
IO = 5 mA to 1.5 A, TJ = 25°C
480
IO = 250 to 750 mA, TJ = 25°C
240
mV
mV
TJ = 25°C
3
IO = 5 mA to 1 A
0.5
VI = -27 to -38 V
1
IO = 5 mA
Output noise voltage
B = 10Hz to 100KHz, TJ = 25°C
Supply voltage rejection
∆VI = 10 V, f = 120Hz
Vd
Dropout voltage
IO = 1 A, TJ = 25°C, ∆VO = 100 mV
Isc
Short circuit current
SVR
Typ.
VI = -27 to -38 V, TJ = 25°C
Output voltage drift
eN
Min.
mA
mA
54
-1
mV/°C
400
µV
60
dB
1.1
V
1.1
A
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
10/24
L7900 series
5
Application information
Figure 3.
Fixed output regulator
Application information
1. To specify an output voltage, substitute voltage value for "XX".
2. Required for stability. For value given, capacitor must be solid tantalum. If aluminium electrolytics are used,
at least ten times value should be selected. C1 is required if regulator is located an appreciable distance
from power supply filter.
3. To improve transient response. If large capacitors are used, a high current diode from input to output
(1N4001 or similar) should be introduced to protect the device from momentary input short circuit.
Figure 4.
Split power supply (± 15V - 1 A)
(*) Against potential latch-up problems.
11/24
Application information
Figure 5.
Circuit for increasing output voltage
VO=VXX(R1+R2)/R2
VXX/R2 > 3Id
C3 Optional for improved transient response and ripple rejection.
Figure 6.
12/24
High current negative regulator (-5V/4A with 5A current limiting)
L7900 series
L7900 series
6
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
13/24
Package mechanical data
L7900 series
TO-3 MECHANICAL DATA
mm.
DIM.
MIN.
A
inch
TYP
MAX.
MIN.
TYP.
11.85
B
0.96
MAX.
0.466
1.05
1.10
0.037
0.041
0.043
C
1.70
0.066
D
8.7
0.342
E
20.0
0.787
G
10.9
0.429
N
16.9
0.665
P
26.2
R
3.88
1.031
4.09
U
0.152
39.5
V
1.555
30.10
1.185
A
P
D
C
O
N
B
V
E
G
U
0.161
R
P003C/C
14/24
L7900 series
Package mechanical data
TO-220 (A TYPE) MECHANICAL DATA
DIM.
A
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.067
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.600
0.620
E
10.0
10.40
0.393
0.409
e
2.4
2.7
0.094
0.106
e1
4.95
5.15
0.194
0.203
F
1.23
1.32
0.048
0.051
H1
6.2
6.6
0.244
0.260
J1
2.40
2.72
0.094
0.107
L
13.0
14.0
0.511
0.551
L1
3.5
3.93
0.137
0.154
L20
16.4
0.645
L30
28.9
1.138
φP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
0015988/N
15/24
Package mechanical data
L7900 series
TO-220FP MECHANICAL DATA
DIM.
mm.
MIN.
A
4.40
TYP
inch
MAX.
MIN.
TYP.
MAX.
4.60
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.50
0.045
0.059
F2
1.15
1.50
0.045
0.059
G
4.95
5.2
0.194
0.204
G1
2.4
2.7
0.094
0.106
H
10.0
10.40
0.393
0.409
L2
L3
16
0.630
28.6
30.6
1.126
1.204
L4
9.8
10.6
0.385
0.417
L5
2.9
3.6
0.114
0.142
L6
15.9
16.4
0.626
0.645
L7
9
9.3
0.354
0.366
DIA.
3
3.2
0.118
0.126
7012510A-H
16/24
L7900 series
Figure 7.
Package mechanical data
DRAWING DIMENSION D2PAK (TYPE STD-ST)
0079457/L
17/24
Package mechanical data
Figure 8.
L7900 series
DRAWING DIMENSION D2PAK (TYPE WOOSEOK-SUBCON.)
0079457/L
18/24
L7900 series
Table 11.
Package mechanical data
D2PAK MECHANICAL DATA
DIM.
MIN.
TYPE WOOSEOK-SUBCON.
mm.
mm.
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
4.30
4.70
A1
0.03
0.23
0
0.20
b
0.70
0.93
0.70
0.90
b2
1.14
1.70
1.17
1.37
c
0.45
0.60
0.45
0.50
0.60
c2
1.23
1.36
1.25
1.30
1.40
D
8.95
9.35
9
9.20
9.40
D1
7.50
E
10
E1
8.50
e
7.50
10.40
9.80
10.20
7.50
2.54
2.54
e1
4.88
5.28
H
15
15.85
15
J1
2.49
2.69
2.20
2.60
L
2.29
2.79
1.79
2.79
L1
1.27
1.40
1
1.40
L2
1.30
1.75
1.20
1.60
R
V2
Note:
TYPE STD-ST
5.08
0.4
0°
15.30
15.60
0.30
8°
0°
3°
The D2PAK package coming from the subcontractor Wooseok is fully compatible with the
ST's package suggested footprint.
19/24
Package mechanical data
L7900 series
Figure 9.
D2PAK FOOTPRINT RECOMMENDED DATA
Table 12.
FOOTPRINT DATA
VALUES
20/24
mm.
inch.
A
12.20
0.480
B
9.75
0.384
C
16.90
0.665
D
3.50
0.138
E
1.60
0.063
F
2.54
0.100
G
5.08
0.200
L7900 series
Package mechanical data
Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
180
13.0
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
10.50
10.6
10.70
0.413
0.417
0.421
Bo
15.70
15.80
15.90
0.618
0.622
0.626
Ko
4.80
4.90
5.00
0.189
0.193
0.197
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
11.9
12.0
12.1
0.468
0.472
0.476
21/24
Order code
L7900 series
7
Order code
Table 13.
Order code
Packaging
Part numbers
TO-220
(A Type)
D2PAK
TO-220FP
TO-3
OUT. VOLT.
L7905C
L7905CV
L7905CD2T-TR
L7905CP
L7905CT(1)
-5 V
L7906C
L7906CV
L7906CD2T-TR
L7906CP(1)
L7906CT(1)
-6 V
L7908CD2T-TR
(1)
(1)
-8 V
L7908C
L7908CP
L7908CT
L7912C
L7912CV
L7912CD2T-TR
L7912CP
L7912CT(1)
L7915C
L7915CV
L7915CD2T-TR
L7915CP
L7915CT
-15 V
L7918C
L7918CV
L7918CD2T-TR(1)
L7918CP(1)
L7918CT(1)
-18 V
L7920CV
L7920CD2T-TR(1)
L7920CP(1)
L7920CT(1)
-20 V
L7924CV
L7924CD2T-TR(1)
L7924CP(1)
L7924CT
-24 V
L7920C
L7924C
1.
L7908CV
Available on Request.
22/24
-12 V
L7900 series
Revision history
8
Revision history
Table 14.
Revision history
Date
Revision
Changes
22-Jun-2004
9
Ordering Codes updated Table 3, pag. 3.
31-Aug-2005
10
Add new order codes (TO-220 E Type) on Table 3, pag. 3.
19-Jan-2007
11
D2PAK mechanical data has been updated, add footprint data and the
document has been reformatted.
23/24
L7900 series
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
24/24
Similar pages