Wall LANEW2409R3 3 watt dc/dc converter single and dual outputs 2:1 wide input voltage range Datasheet

LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
FEATURES
● Low Ripple & Noise
● 3 Watts Output Power
● Single and Dual Output
● External ON/OFF Control
UL
TUV
CB
CE MARK
(Pending)
● RoHS Directive Compliant
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● Input to Output Isolation up to 1KVDC
● SIP Package: 0.86 x 0.36 x 0.44 Inches
SPECIFICATIONS: LANEW3 Series
o
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
5V nominal input
12V nominal input
Input Voltage Range
24V nominal input
48V nominal input
Input Current
Input Filter
Input Voltage Variation
dv/dt
Input Surge Voltage (100ms max)
Input Reflected Ripple Current
Start Up Time
(Nominal Vin and constant resistive Load)
5V nominal input
12V nominal input
24V nominal input
48V nominal input
5V nominal input
12V nominal input
24V nominal input
48V nominal input
Power Up
Remote ON/OFF
DC-DC ON
DC-DC OFF
4.5 – 9 VDC
9 – 18 VDC
18 – 36 VDC
36 – 75 VDC
See Table
Capacitor Type
5V/ms, max
(Complies with ETS300 132 part 4.4)
15 VDC
36 VDC
50 VDC
100 VDC
400mAp-p
150mAp-p
380mVp-p
170mVp-p
1ms typ
1ms typ
Open or high impedance
Control pin applied current
4 ~ 8mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
1mA max
Application Circuit
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy (Full load and nominal Vin)
Line Regulation (Low line to high line at full load)
Load Regulation
Cross Regulation (Dual)
Minimum Load (See Note 3)
Single Output (min. load to 100% load)
Dual Output (balanced on all outputs)
Asymmetrical load 25% / 100% FL
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
See Table
±1%
±0.2%
±0.5%
±1%
±5%
See Table
LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
SPECIFICATIONS (CONTINUED)
OUTPUT SPECIFICATIONS (CONTINUED)
Output Power
Output Current
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage (input to output)
Insulation Resistance
Isolation Capacitance
ENVIRONMENTAL SPECIFICATIONS
25% load step change
Continuous, automatic recovery
See Table
100KHz, min.
1600VDC, min.
10GΩ min.
1000pF max.
Full load to minimum load
Operating Temperature
Storage Temperature
Relative Humidity
Thermal Shock
Vibration
MTBF (see Note 1)
3 Watts max.
See Table
75mVp-p
500µs typ.
±0.1% / °C max.
Bellcore TR-NWT-000332
MIL-STD-217F
PHYSICAL SPECIFICATIONS
Weight
Dimensions
Case Material
Base Material
Potting Material
SAFETY & EMC
Safety Standard Pending
-40°C ~ +71°C (without derating)
+71°C ~+100°C (with derating)
-55°C to +125°C
5% to 95% RH
MIL-STD-810D
10-55Hz, 10G, 30 minutes along X, Y, and Z axis
4,386,000 Hours
2,401,000 Hours
4.8 grams (0.17oz)
0.86 x 0.36 x 0.44 inches (21.8 x 9.2 x 11.1 mm)
Non-conductive black plastic
None
Silicon (UL94-V0)
IEC60950-1, UL60950-1, EN60950-1
5V nominal input
12V nominal input
24V nominal input
48V nominal input
100µF & 10µF
100µF & 10µF
10µF & 120µF
10µF & 120µF
Meet EN55022 classes B recommend
circuit with an external L-C filter at input
EMC External Circuit
EMC Characteristics (See Note 2)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number
LANEW533R3
LANEW505R3
LANEW509R3
LANEW512R3
LANEW515R3
LANEW505RD3
LANEW512RD3
LANEW515RD3
LANEW1233R3
LANEW1205R3
LANEW1209R3
LANEW1212R3
LANEW1215R3
LANEW1205RD3
LANEW1212RD3
LANEW1215RD3
LANEW2433R3
LANEW2405R3
LANEW2409R3
LANEW2412R3
LANEW2415R3
LANEW2405RD3
LANEW2412RD3
LANEW2415RD3
LANEW4833R3
LANEW4805R3
LANEW4809R3
LANEW4812R3
LANEW4815R3
LANEW4805RD3
LANEW4812RD3
LANEW4815RD3
Input Range
5 VDC
(4.5 – 9 VDC)
12 VDC
(9 – 18 VDC)
24 VDC
(18 – 36 VDC)
48 VDC
(36 – 75 VDC)
Output
Voltage
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
Output Current
Min. load(3) Full load
35mA
700mA
30mA
600mA
20mA
333mA
17mA
250mA
14mA
200mA
±15mA
±300mA
±10mA
±125mA
±10mA
±100mA
35mA
700mA
30mA
600mA
20mA
333mA
17mA
250mA
14mA
200mA
±15mA
±300mA
±10mA
±125mA
±10mA
±100mA
35mA
700mA
30mA
600mA
20mA
333mA
17mA
250mA
14mA
200mA
±15mA
±300mA
±10mA
±125mA
±10mA
±100mA
35mA
700mA
30mA
600mA
20mA
333mA
17mA
250mA
14mA
200mA
±15mA
±300mA
±10mA
±125mA
±10mA
±100mA
(7)
Input Current
(6) Capacitor
(4)
(5) Efficiency
Load max
No load
Full load
113mA
670mA
73%
1760uF
75mA
822mA
77%
1000uF
83mA
811mA
78%
470uF
83mA
800mA
79%
170uF
53mA
790mA
80%
110uF
45mA
822mA
77%
±470uF
135mA
800mA
79%
±100uF
120mA
790mA
80%
±47uF
45mA
275mA
74%
1760uF
45mA
338mA
78%
1000uF
45mA
333mA
79%
470uF
45mA
329mA
80%
170uF
53mA
325mA
81%
110uF
75mA
329mA
80%
±470uF
60mA
325mA
81%
±100uF
60mA
325mA
81%
±47uF
23mA
138mA
74%
1760uF
10mA
169mA
78%
1000uF
23mA
167mA
79%
470uF
26mA
164mA
80%
170uF
20mA
162mA
81%
110uF
20mA
164mA
80%
±470uF
24mA
162mA
81%
±100uF
24mA
162mA
81%
±47uF
11mA
69mA
74%
1760uF
12mA
84mA
78%
1000uF
8mA
83mA
79%
470uF
8mA
82mA
80%
170uF
18mA
81mA
81%
110uF
12mA
82mA
80%
±470uF
12mA
81mA
81%
±100uF
15mA
81mA
81%
±47uF
NOTES:
1. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC (Ground fixed and controlled environment).
MIL-STD-217F Notice2 @ Ta = 25°C, Full Load (Ground fixed and controlled environment).
2. The LANEW3 Series requires an external filter to meet EN55022 Class B.
3. The LANEW3 Series requires a minimum load at the output to maintain specified regulation. Operation under no-load
condition will not damage these devices, however they may not meet all listed specifications.
4. Typical value at nominal input voltage.
5. Maximum value at nominal input voltage and full load.
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistive load.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
DERATING CURVES
MECHANICAL DRAWING
Pin
1
2
3
5
6
7
8
PIN CONNECTION
Single Output
Dual Output
-INPUT
-INPUT
+INPUT
+INPUT
CTRL
CTRL
NC
NC
+OUTPUT
+OUTPUT
-OUTPUT
COMMON
NC
-OUTPUT
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Similar pages