CLARE LBA120LSTR Dual pole optomos relay Datasheet

LBA120L
DUAL POLE OptoMOS® Relay
Load Voltage
Load Current
Max RON
LBA120L
250
170
20
Description
LBA120L is 250V, 170mA, 20Ω independent 1-Form-A
and 1-Form-B relays. It features low on-resistance combined with enhanced peak load current handling capabilities. Current limiting version is available (“L” suffix, see
specification for variations in performance).
Units
V
mA
Ω
Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Current Limiting Surface Mount and Tape & Reel
Versions Available
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified to:
• BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
• BS EN 41003:1993
Certificate #: 7344
Ordering Information
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Part #
LBA120L
LBA120LS
LBA120LSTR
Description
8 Pin DIP
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount (1000/Reel)
Pin Configuration
LBA120L Pinout
AC/DC Configuration
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
1
8
2
7
3
6
4
5
Switching Characteristics of
Normally Open (Form A) Devices
Normally Closed Pole
Normally Open Pole
Switching Characteristics of
Normally Closed (Form B) Devices
10ms
10ms
CONTROL
CONTROL
+90%
+
90%
LOAD
10%+
10%+
TON
DS-LBA120L-R3
www.clare.com
TOFF
+
90%
+10%
TOFF
TON
1
LBA120L
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Min
Input Power Dissipation
-
-
1501
mW
Input Control Current
Peak (10ms)
-
-
50
1
mA
A
Reverse Input Voltage
-
-
5
V
Total Power Dissipation
-
-
8002
mW
Isolation Voltage
Input to Output
3750
-
-
VRMS
Operational Temperature
-40
-
+85
°C
Storage Temperature
-40
-
+125
°C
-
-
+260
+220
°C
°C
Soldering Temperature
DIP Package
Surface Mount Package
(10 Seconds Max.)
1
Derate Linearly 1.33 mw/˚C
2
Derate Linearly 6.67 mw/˚C
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Typ Max Units
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Load Voltage (Peak)
-
VL
-
-
250
V
Load Current*(Continuous)
AC/DC Configuration
-
IL
-
-
150
mA
10ms
ILPK
-
-
-
mA
IL=170mA
VL=250V
RON
ILEAK
-
21
-
25
1
Ω
µA
Switching Speeds
Turn-On
Turn-Off
IF=5mA, VL=10V
IF=5mA, VL=10V
TON
TOFF
-
-
5
5
ms
ms
Output Capacitance
50V; f=1MHz
COUT
-
50
-
pF
Load Current Limiting
Form A only
ICL
190
235
280
mA
IL=120mA
IF
5
-
50
mA
Output Characteristics @ 25°C
Peak Load Current
On-Resistance
AC/DC Configuration
Off-State Leakage Current
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
-
-
0.4
0.7
-
mA
IF=5mA
VF
0.9
1.2
1.4
V
Reverse Input Voltage
-
VR
-
-
5
V
Reverse Input Current
VR=5V
IR
-
-
10
µA
Input Voltage Drop
Input to Output Capacitance
-
CI/O
-
3
-
pF
Input to Output Isolation
-
VI/O
3750
-
-
VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
2
www.clare.com
Rev. 3
LBA120L
PERFORMANCE DATA*
LBA120L - Form A
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
Device Count (N)
Device Count (N)
30
25
20
15
10
35
35
30
30
25
20
15
10
5
5
0
0
1.17
1.19
1.21
1.23
1.25
15
10
14.4
14.8
15.2
15.6
10.4
40
30
35
15
10
5
Device Count (N)
35
20
25
20
15
10
5
0
388
392
396
400
25
20
15
10
0
Blocking Voltage (V)
0.6
LBA120L - Form A
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
25
5
Device Count (N)
35
20
Device Count (N)
25
10
15
10
5
0.81
0.99
1.17
1.35
1.53
0.5
LED Current (mA)
15
10
0.7
0.9
1.1
1.3
1.5
0.45
LBA120L - Form B
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
30
5
Device Count (N)
35
30
Device Count (N)
35
10
25
20
15
10
5
0.32
0.41
0.50
0.59
Turn-On (ms)
0.68
0.77
0.99
1.17
1.35
25
20
15
10
5
0
0
0.81
LBA120L - Form A
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
25
0.23
0.63
LED Current (mA)
30
15
1.8
20
LED Current (mA)
20
1.6
0
0.3
LBA120L - Form A
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
1.4
5
0
0
1.2
LBA120L - Form B
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
25
15
1.0
LED Current (mA)
30
0.63
0.8
Blocking Voltage (V)
20
12.4
30
291.25 293.75 296.25 298.75 301.25 303.75
LBA120L - Form B
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
12.0
5
0
384
11.6
LBA120L - Form A
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
LBA120L - Form B
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
30
25
11.2
On-Resistance (Ω)
35
380
10.8
On-Resistance (Ω)
Device Count (N)
Device Count (N)
20
0
14.0
LBA120L - Form A
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
Device Count (N)
25
5
LED Forward Voltage Drop (V)
Device Count (N)
LBA120L - Form B
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
Device Count (N)
35
LBA120L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
0
0.30
0.42
0.54
0.66
0.78
0.90
Turn-On (ms)
0.06
0.10
0.14
0.18
0.22
0.26
0.30
Turn-Off (ms)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 3
www.clare.com
3
LBA120L
PERFORMANCE DATA*
LBA120L - Form B
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
LBA120L - Form A
Typical Load Current vs. Temperature
Load Current (mA)
Device Count (N)
30
25
20
15
10
LBA120L - Form B
Typical Load Current vs. Temperature
250
250
200
200
Load Current (mA)
35
150
20mA
10mA
5mA
100
50
150
5mA
100
50
5
0
0
1.125
1.375
1.625
0
-40
1.875
-20
0
20
80
100
120
20
40
60
80
100
LBA120L - Form A
Typical Blocking Voltage
vs. Temperature
0.025
0.14
0.12
0.10
0.020
0.015
0.010
0.005
0
20
40
60
80
0
100
-20
0
LBA120L - Form B
Typical Blocking Voltage
vs. Temperature
305
0.5
Turn-On (ms)
0.6
300
295
290
20
40
60
80
285
-40
80
0.4
10mA
0.3
20mA
0.2
100
Turn-Off (ms)
2.000
0.15
0.10
0.05
-20
0
20
40
60
80
20
40
60
Temperature (°C)
0.04
5mA
-40
-20
0
80
100
5mA
1.000
10mA
0.500
20mA
-20
0
20
40
60
Temperature (°C)
40
60
80
100
LBA120L
Typical LED Forward Voltage Drop
vs. Temperature
1.500
-40
20
Temperature (°C)
0
0
0.06
100
5mA
0
100
0.08
LBA120L - Form B
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
0.20
80
0
LBA120L - Form A
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
2.500
60
0.10
Temperature (°C)
0.25
40
0.02
-40
0.30
20
0.12
5mA
Temperature (°C)
-20
0
LBA120L - Form B
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
80
100
LED Forward Voltage Drop (V)
60
-20
Temperature (°C)
0
40
380
100
0.1
20
385
LBA120L - Form A
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
310
0
390
Temperature (°C)
Temperature (°C)
-20
395
375
-40
Turn-On (ms)
-20
120
400
Blocking Voltage (VRMS)
0.030
-40
0
LBA120L - Form B
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
0.16
-40
-20
LBA120L - Form A
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
0.18
-40
-40
Temperature (°C)
0.06
Blocking Voltage (VRMS)
60
Temperature (°C)
0.08
Turn-Off (ms)
40
Turn-Off (ms)
Leakage (µA)
Leakage (µA)
0.625 0.875
1.8
1.6
1.4
50mA
30mA
20mA
10mA
5mA
1.2
1.0
0.8
-40
-20
0
20
40
60
80
100
120
Temperature (°C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
4
www.clare.com
Rev. 3
LBA120L
PERFORMANCE DATA*
LBA120L - Form B
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
0.160
0.632
0.150
0.25
0.20
0.630
0.628
0.626
0.15
0.624
0.10
0.622
0
2
4
6
8
10
12
14
16
18
Turn-Off (ms)
0.634
0.35
0.30
0.130
0.120
0.100
20
0
5
10
15
20
25
30
35
40
45
50
0
LBA120L - Form A
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mA)
50.000
.4
40
30
20
.2
10
0
0
5
10
15
20
25
30
35
40
45
On-Resistance (Ω)
60.000
50
On-Resistance (Ω)
60
.6
0
20
40
60
80
-40
2.0
1.5
1.0
0
-40
-20
0
20
40
60
80
100
20
40
60
80
100
2.000
1.500
1.000
0.500
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Temperature (°C)
LBA120L - Form B
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
LBA120L - Form A
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
LBA120L - Form B
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
200
200
150
Load Current (mA)
2.0
1.5
1.0
Load Current (mA)
150
0.5
100
50
0
-50
-100
-20
0
20
40
60
80
-200
-2.5 -2.0 -1.5 -1.0 -0.5
100
100
50
0
-50
-100
-150
-150
0
Temperature (°C)
0
0.5 1.0 1.5 2.0 2.5
-200
-2.0
-1.5 -1.0 -0.5
0
0.5
1.0
1.5
2.0
Load Voltage (V)
Load Voltage (V)
LBA120L
Typical Current Limiting vs. Temperature
IF = 5mADC
LBA120L
Energy Rating Curve
400
1.2
350
1.0
300
Current (mA)
Load Current (A)
0
Temperature (°C)
2.5
-40
-20
Temperature (°C)
3.0
LED Current (mA)
LED Current (mA)
2.500
LED Current (mA)
3.000
2.5
0
20
LBA120L - Form A
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
3.0
0.5
18
Temperature (°C)
2.500
0.500
16
20.000
3.000
1.000
14
30.000
100
LBA120L - Form B
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
1.500
12
40.000
Temperature (°C)
2.000
10
0
-20
LED Forward Current (mA)
LBA120L - Form A
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC)
8
10.000
-40
50
6
LBA120L - Form B
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
1.0
.8
4
LED Forward Current (mA)
1.2
0
2
LED Forward Current (mA)
LBA120L - Form B
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
Turn-Off (ms)
0.140
0.110
LED Forward Current (mA)
LED Current (mA)
LBA120L - Form A
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
0.40
Turn-On (ms)
Turn-On (ms)
LBA120L - Form A
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
0.8
0.6
0.4
250
200
150
100
0.2
50
0
10µs 100µs 1ms 10ms 100ms
Time
0
1s
10s 100s
-40
-20
0
20
40
60
80
100
Temperature (°C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 3
www.clare.com
5
LBA120L
Mechanical Dimensions
9.652 ± .381
(.380 ± .015)
8 Pin DIP Through Hole (Standard)
7.620 ± .254
(.300 ± .010)
7.239 TYP.
(.285)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
3.302
(.130)
9.144 ± .508
(.360 ± .020)
6.350 ± .127
(.250 ± .005)
9.144 TYP.
(.360)
2.540 ± .127
8-.800 DIA. (.100 ± .005)
(8-.031 DIA.)
.457 ± .076
(.018 ± .003)
7.620 ± .127
(.300 ± .005)
8.077 ± .127
(.318 ± .005 )
3.302
(.130)
.254 TYP.
(.010)
8.305 ± .127
(.327 ± .005)
9.525 ± .254
(.375 ± .010)
6.350 ± .127
(.250 ± .005)
.635 TYP.
(.025)
(.100 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
4.445 ± .127
(.175 ± .005)
PC Board Pattern
(Top View)
2.540 ± .127
9.652 ± .381
(.380 ± .015)
8 Pin DIP Surface Mount (“S” Suffix)
7.620 ± .127
(.300 ± .005)
6.350 ± .127
(.250 ± .005)
1.905 ± .127
(.075 ± .005)
.457 ± .076
(.018 ± .003)
1.498 ± .127
(.059 ± .005)
8.077 ± .127
(.318 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8 Pin Flatpack (“P” Suffix)
2.159 TYP.
(.085)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
2.286 MAX.
.635 ± .127
(.090)
(.025)
6.350 ± .127
(.250 ± .005)
9.398 ± .127
(.370 ± .005)
8.763 ± .127
(.345 ± .005)
.203
(.008)
.457 ± .076
(.018 ± .003)
1.193
(.047)
8.077 ± .127
(.318 ± .005)
.787
(.031)
Dimensions
mm
(inches)
6
www.clare.com
Rev. 3
LBA120L
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Surface Mount Package
330.2 DIA.
(13.00)
6.731 MAX.
1.753 ± .102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
Top Cover
Tape Thickness
.102 MAX.
(.004)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.300
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.989 ± .102
(.472 ± .004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Embossment
Tape and Reel Packaging for 8 Pin Flatpack Package
330.2 DIA.
(13.00)
Top Cover
Tape Thickness
.102 MAX.
(.004)
6.731 MAX.
1.753 ± 0.102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.287
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.988 ± .102
(.472 ± .004)
Embossment
10.287 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Dimensions
mm
(inches)
Rev. 3
www.clare.com
7
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA/PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-LBA120L-R3
©Copyright 2000, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
2/13/01