133MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13301 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 132.85 133 133.15 Insertion Loss dB - 27.4 28 1.5 dB Bandwidth MHz - 10.12 - 3 dB Bandwidth MHz 10.2 10.23 - 30 dB Bandwidth MHz - 10.8 10.85 40 dB Bandwidth MHz - 10.88 - 45 dB Bandwidth MHz - 10.92 11.2 50 dB Bandwidth MHz - 10.97 11.8 Passband Variation dB - 0.9 1.5 Absolute Delay usec - 4.38 - Ultimate Rejection(f0±10MHz) dB 50 64 - Material Temperature coefficient KHz/°C -2.4 Substrate Material - 112LT Ambient Temperature °C 25 DC Voltage V 0 Input Power dBm ESD Class - - - 10 1A DIP3512 (35.0x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT13301 Rev. Date 2010-12-06 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 133MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13301 www.sipatsaw.com Matching Configuration L1 INPUT 50Ω L1=L2=33nH L2 OUTPUT 50Ω C1=C2=47pF Source/Load Impedance=50 ohm C1 C2 Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBT13301 XXYYZZ 1 Output 5 Ground All Others 4.70 0.50 4.50 0.50 0.45 0.05 Input Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT13301: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 2.54 0.20 2.54 0.20 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 5 6 1 Package: DIP3512 7.62 0.50 4 3 2 25.40 0.50 Part Number LBT13301 Rev. Date 2010-12-06 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 133MHz SAW Filter 10MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13301 www.sipatsaw.com Typical Performance Frequency Response Passband Response Type Performance Type Performance -17.4221 -25.9221 -27.4221 -26.4221 -37.4221 -26.9221 -27.4221 A m plitude ripple(dB ) -57.4221 -67.4221 -77.4221 -27.9221 -28.4221 -87.4221 -28.9221 -97.4221 -29.4221 -107.4221 -117.4221 115 120 125 130 135 Frequency(MHz) Horizontal: 5MHz/Div 140 145 124 150 Vertical: 10dB/Div 126 128 130 132 134 Frequency(MHz) Horizontal: 2MHz/Div Group Delay Variation(f0±5MHz) 136 138 140 142 Vertical: 0.5dB/Div Phase Linearity(f0±5MHz) Type Performance Type Performance 30 4800 4700 20 4600 10 4500 X: 138 Y: 3.902 4400 X: 133 Y: 4377 X: 128 Y: 4349 X: 138 Y: 4354 X: 133 Y: 0.2865 X: 128 Y: -1.596 0 Degree(deg) G roup Delay T im e(ns ) 4300 -10 4200 4100 -20 4000 -30 3900 130 135 -40 125 140 130 135 Frequency(MHz) Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 +j0.2 0.0 -j0.2 -j5.0 ∞ -j5.0 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 5.0 ∞ +j5.0 2.0 5.0 2.0 1.0 0.5 +j5.0 -j0.2 +j2.0 0.5 +j0.2 0.2 +j0.5 -j0.5 Vertical: 10deg/Div Smith Chart S22 +j1.0 0.0 140 Frequency(MHz) 1.0 3800 125 0.2 Magnitude(dB) -47.4221 Part Number LBT13301 Rev. Date 2010-12-06 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3