CREE LC503UHR1-30P-A-CB0GA 5-mm round led Datasheet

Cree® 5-mm Round LED
Model # LC503UHR1-30P-A
Data Sheet
30-degree, 5-mm round LED lamp in red color with water-transparent lens and stopper
Applications
•
•
•
•
Advertising Signs
Indicators
Traffic Lights
Automotive Lighting
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
50
mA
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
130
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Electrostatic Discharge
Classification(MIL-STD-883E)
ESD
Class 2
Forward Current
Peak Forward Current
Note
Note: Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Forward Voltage
VF
Reverse Current
IR
Dominant Wavelength
Luminous Intensity
2
IF = 20
A
VR = 5 V
Unit
Minimum
V
Typical
Maximum
2.1
2.6
A
100
D
IF = 20 mA
nm
618
624
IV
IF = 20 mA
mcd
3000
5100
½H-H
IF = 20 mA
deg
630
30
D-CT038
Data Sheet: CL
50% Power Angle
Condition
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LC503UHR1-30P-A (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (
) bins shown.
D
Orders for LC503UHR1-30P-A may be filled with any or all bins contained as below.
Luminous Intensity (IV)
All luminous intensity (IV) and dominant wavelength (
) values shown and specified are at IF = 20 mA.
D
Z or
above
8200 mcd
Y
5860 mcd
X
4180 mcd
W
3000 mcd
618 nm
630 nm
Dominant Wavelength (
)
D
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of dominant wavelength is ±1 nm.
5. Tolerance of measurement of VF is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT038.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/ledlamps
Document No. SPE/LC503UHR1-30Q-A
Rev. No.
03
GraphsGraphs
-50
-60
If (mA)
100.0
-40
-20
-30
-10
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
20.0
-40.0
0.0
1.8
2.0 2.2
2.4 2.6 2.8
FIG.1 FORWARD CURRENT VS.
Vf(V)
Ir(uA)
-50.0
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
FORWARD VOLTAGE.
Half Power
WL=23nm
Domi WL= 624nm
5.0
4.0
100%
3.0
75%
2.0
50%
1.0
25%
If(mA)
0.0
0.0
20.0 40.0 60.0
WL(nm)
500 600 700 800 900
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
0%
400
80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT.
100
WAVELENGTH.
IF(mA)
50% Power Angle : 30
80
Ie(%)
0
100%
60
80%
40
60%
20
40%
0
0.0
20.0 40.0 60.0
0%
80.0 100.0
-60
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE (Tjmax=105 C)
Items
20%
Ta( C)
-30
0
30
60
90
FIG.6 FAR FIELD PATTERN
Signatures
Date
Revision History
Prepared by
WangFJ
2007-09-21
Rev. No
Checked by
WangDW
2007-09-21
02
2007-07-06 Release. IV from V,W,X,Y(typ)4200 to W,X,Y(typ)5100mcd.
Approved by
David
2007-09-21
03
2007-09-21 Add ESD rank
Date
Change Description
© 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
FCN# Copyright
FCN20070234
Cree logo are registered trademarks of Cree, Inc.
Data is subject
to CLD-CT038.000
change without prior notice; please refer to COTCO Website for the latest version.
Copyright@2002 Cotco International Ltd.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/ledlamps
Mechanical Dimensions
Document No. SPE/LC503UHR1-30P-A
Rev.
01noted.
All dimensions are in mm. Tolerance is ±0.25
mm No.
unless otherwise
An epoxy meniscus may extend about 1.5 mm down the leads.
Dimension Drawing
Burr around bottom of epoxy may be 0.5 mm max.
C
ute maximum
Rating
Unit
50
mA
200
mA
5
V
130
mW
0 ~ + 95
°C
0 ~ +100
°C
260°C Notes
for 3 sec Max.
the base of the epoxy bulb)
RoHS Compliance
Class
II
The levels
of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
s between 10mA and 30mA are recommended. Please contact COTCO
recommended
drive conditions.
Vision Advisory Claim
25°Cbe) cautioned not to stare at the light of this LED product. The bright light can damage the eye.
stics ( Users
Ta =should
Condition
Min.
Typ.
Max.
Unit
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
IF = 20mA
---
CLD-CT038.000
2.1
2.6
V
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . :special request *
Packing type
0: Standard = Bulk pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LC503UHR1-30Q-A-00001
Description
5mm Round 30 Red, Full Rank, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT038.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/ledlamps
Similar pages