RSG LEP150F-24-S Rugged pcb type Datasheet

Ordering information
Rugged PCB type
LEP150F
LEP 150
1
2
F
3
-24
4
Recommended Noise Filter
NAC-06-472
R
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
MODEL
DC OUTPUT
LEP150F-24
+24V 6.3(Peak 12)A
LEP150F-36
+36V 4.2(Peak 8)A
-O
5
1Series name
2Output wattage
3Universal input
4Output voltage
5Optional *1
G :Low leakage current
R :with Remote ON/OFF
S :with Chassis
SN:with Chassis & cover
T :Vertical terminal block
U :Operating stop voltage
is set at a lower value
Z :with ZT
LEP150F-48
+48V 3.2(Peak 6)A
SPECIFICATIONS
MODEL
VOLTAGE[V]
LEP
CURRENT[A]
ACIN 100V
ACIN 200V
FREQUENCY[Hz]
INPUT
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
ACIN 100V
ACIN 200V
ACIN 100V
POWER FACTOR
ACIN 200V
ACIN 100V
INRUSH CURRENT[A]
ACIN 200V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
*2
WATTAGE[W]
LINE REGULATION[mV]
LOAD REGULATION[mV]
0 to +45C *3
RIPPLE[mVp-p]
-10 - 0C *3
0 to +45C *3
RIPPLE NOISE[mVp-p]
-10 - 0C *3
0 to +45C
TEMPERATURE REGULATION[mV]
-10 to +45C
DRIFT[mV]
*4
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION
REMOTE ON/OFF
INPUT-OUTPUT -RC
*5
INPUT-FG
OUTPUT-RC-FG
*5
OUTPUT-RC
*5
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
CE MARKING
CONDUCTED NOISE
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
EFFICIENCY[%]
LEP150F-24
LEP150F-36
LEP150F-48
AC85 - 264 1f or DC 120 - 370
2.0typ (Io=100%)
1.0typ (Io=100%)
50/60 (47 - 63) or DC
82typ (Io=100%)
83typ (Io=100%)
84typ (Io=100%)
85typ (Io=100%)
86typ (Io=100%)
87typ (Io=100%)
0.98typ (Io=100%)
0.93typ (Io=100%)
15typ (Io=100%) (At cold start) (Ta=25 C)
30typ (Io=100%) (At cold start) (Ta=25 C)
0.75max (60Hz, According to IEC60950 and DEN-AN)
+24
+36
+48
0 - 6.3 (Peak 12)
0 - 4.2 (Peak 8)
0 - 3.2 (Peak 6)
151.2 (Peak 288)
151.2 (Peak 288)
153.6 (Peak 288)
48max
48max
48max
76max
90max
150max
120max
120max
150max
160max
160max
300max
150max
150max
250max
180max
180max
350max
120max
150max
240max
145max
180max
300max
48max
48max
48max
500max (ACIN 100V, Io=100%)
20typ (ACIN 100V, Io=100%)
21.4 - 26.4
26.4 - 39.6
39.6 - 52.8
23.0 - 25.0
35.0 - 37.0
46.0 - 50.0
Works over 101% of peak current and recovers automatically
Works at 115 - 140% of rating
Option (Refer to Instruction Manual)
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)
AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature)
-10 to +70C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s2 (20G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input)
Low Voltage Directive, EMC Directive
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
Complies with IEC61000-3-2
85X40X222mm (WXHXD) /490g max (without chassis and cover)
Convection
*1 Specification is changed at option, refer to Instruction Manual 6.
*2 Peak loading for 10sec. And Duty 35% max, refer to Instruction Manual 5. In detail.
*3 This is the value that measured on measuring board with capacitor of 22mF within 150mm
from output terminal.Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to
KEISOKU-GIKEN: RM101).
*4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C,
with the input voltage held constant at the rated input/output.
E-6
*5
*
*
*
Applicable when remote control (optional) is added.
Parallel operation with other model is not possible.
Derating is required when operated with chassis and cover.
A sound may occur from power supply at peak loading.
LEP150F
External view
Voltage adjust
5-º3.5
Mounting
Hole
47
95
CN1
4.5
+V
CN2
1
4
5
8
55-+0.5
35-+0.5
-V
4-M4
Mounting
Hole
8
CN2
C119
(68)
75 -+0.5
85
CN1
5 FG
3 Input(N)
1 Input(L)
235-+0.5
2-º4.5
20
(215)
30
Name plate
CN3
5
CN4
Connector for Remote
ON/OFF (option)
105 -+ 0.5
212 -+ 0.5
CN3
CN4
Connector for
-Z (option)
252
235-+0.5
º4.5
2-M4
8
CN4
4.5
CN3
25
37
Mounting
Hole
(Lead)
RC(-)
3max
51
222
15
5
RC(+)
+ COM -
PCB t=1.6
PIN CONNECTION
I / O Connector Mating Connector
Terminal
Chain : SVH-21T-P1.1
CN1
VHR-5N
B3P5-VH
Loose: BVH-21T-P1.1
Chain : SVH-21T-P1.1
CN2
VHR-8N
B8P-VH
Loose: BVH-21T-P1.1
Chain : SXH-001T-P0.6
CN3
XHP-2
(Option) B2B-XH-A
Loose: BXH-001T-P0.6
Chain : SXH-001T-P0.6
CN4
XHP-3
B3B-XH-A
(Option)
Loose: BXH-001T-P0.6
(Mfr: J.S.T.)
CN1
Pin No. Input
1
AC(L)
2
3
AC(N)
4
5
FG
CN2
Pin No.
Output
1, 2, 3, 4 -V
5, 6, 7, 8
+V
CN3 (Option)
Pin No. Remote ON/OFF
1
RC(+)
2
RC(-)
¶Weight: 490g or less
(Without chassis and cover)
¶Tolerance: t1
¶Dimensions in mm.
¶PCB Material : CEM3
¶Chassis and cover is optional.
¶Mounting torque: 1.5N · m(16kgf · cm)max
CN4 (Option)
Pin No.
-Z
1
+
COM
2
3
¶Keep drawing current per pin below 5A(7A at peak load)for CN2
Performance data
¡RISE TIME & FALL TIME (LEP150F-24)
¡EFFICIENCY (LEP150F-24)
88
86
ACIN 100V Io=100%
EFFICIENCY
84
DC Output
82
80
AC Input
78
100ms/DIV
76
60
20ms/DIV
¡INPUT HARMONIC CURRENT (LEP150F-24)
140
180
220
260
300
V
¡INPUT HARMONIC CURRENT (LEP150F-24)
10
HARMONIC CURRENT
Load factor
100%
Input voltage AC 100V
1
0.1
0.01
10
20
30
Harmonic current standard class A
(at odd number)
A
Harmonic current standard class A
(at odd number)
A
HARMONIC CURRENT
100
INPUT VOLTAGE
10
0.001
0
Load factor100%
Load factor 50%
1
Load factor
100%
Input voltage AC 230V
0.1
0.01
0.001
0
40
HARMONIC ORDER
10
20
Distribution:
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
Änderungen vorbehalten / subject to change without notice
30
40
HARMONIC ORDER
■
■
■
E-7
LEP
Similar pages