Seoul LM560A Warm white lamp led Datasheet

Z-Power LED
X10490
Technical
Data
Sheet
Specification
LM560A
SSC
Drawn
Approval
CUSTOMER
Approval
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Contents
1. Features
2. Absolute Maximum Ratings
3. Electric-Optical Characteristics
4. Reliability Tests
5. Characteristic Diagrams
6. Color & Binning
7. Outline Dimensions
8. Packing
9. Soldering
10. Precaution for use
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
LM560A
LM560A
Description
Features
사진
Lamp LEDs are effective in hot thermal
and humid condition. This high brightness
and weather-resistant packaging design
makes these Lamp LEDs
ideal for
Outdoor applications such as traffic
• High luminous Warm
emission
• Non-standoff leads
• 5mm package
• Viewing angle : 60 º
• Color Coordinates :
x=0.45 y=0.41
signals, variable message signs and
backlighting for transparent sign panels.
Applications
• Electronic signs and
signals
• Specialty lighting
• Small area illumination
• Torches and head
lamps
• Backlighting
• Outdoor displays
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
2. Absolute Maximum Ratings ( Ta = 25ºC )
Item
Symbol
Value
Unit
DC Forward Current
IF
30
mA
Forward Peak Pulse Current
IFP [1]
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
114
mW
Operating Temperature
Topr
-40 ~ 100
ºC
Storage Temperature
Tstg
-40 ~ 100
ºC
Solder Temperature
Ts
260ºC for 10seconds [2]
ºC
Notes :
[1] t ≤ 0.1ms, D = 1/10
[2] No lower than 3mm from the base of the epoxy bulb.
3. Electro-Optical Characteristics ( Ta = 25ºC, IF=20mA )
Item
Symbol
Luminous Intensity [3]
Value
Unit
Min.
Typ.
Max.
IV [4]
1250
2500
-
mcd
Luminous Flux
ФV
-
2.7
-
lm
Chromaticity Coordinate [5]
x, y
Forward Voltage [6]
VF
View Angle
2θ ½
60
deg.
Thermal Resistance
RθJ-A
285
ºC /W
Optical Efficiency
Ŋelc
-
42
-
lm/W
Reverse Current (at VR = 5V)
IR
-
-
5
µA
x=0.45, y=0.41
-
3.2
3.8
V
Notes :
[3] SSC maintains a tolerance of ±10% on intensity and power measurements.
[4] IV is the luminous intensity output as measured with a cylinder.
[5] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
Color Coordinates Measurement allowance is ± 0.01
[6] A tolerance of ±0.05V on forward voltage measurements
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
4. Reliability Tests
Item
Condition
Note
Failures
Life Test
Ta = RT, IF = 30mA
1000hrs
0/22
High Temperature Operating
Ta = 85ºC, IF = 8mA
1000hrs
0/22
Low Temperature Operating
Ta = -30ºC, IF = 20mA
1000hrs
0/22
Thermal Shock
Ta = -40ºC (30min) ~ 100º (30min)
(Transfer time : 10sec, 1Cycle = 1hr)
100
cycles
0/40
Resistance to soldering Heat
Ts = 255 ± 5ºC, t = 10sec
1 time
0/22
ESD
(Human Body Model)
1kV, 1.5kΩ ; 100pF
1 time
0/22
High Temperature Storage
Ta = 100ºC
1000hrs
0/22
Low Temperature Storage
Ta = -40ºC
1000hrs
0/22
Temperature Humidity
Storage
Ta = 85ºC, RH = 85%
1000hrs
0/22
Temperature Humidity
Operating
Ta = 85ºC, RH = 85%, IF = 8mA
100hrs
0/22
< Judging Criteria For Reliability Tests >
VF
USL[1] X 1.2
IR
USL X 2.0
ФV
LSL [2] X 0.7
Notes :
[1] USL : Upper Standard Level
[2] LSL : Lower Standard Level.
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
5. Characteristic Diagrams
Ta= 25ºC
Relative Luminous Intensity
Forward Current(mA)
100
10
Ta= 25ºC
4
3
2
1
1
0
2.4
2.8
3.2
3.6
4.0
4.4
0
Forward Voltage [V]
40
60
80
100
Forward Current [mA]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
40
0.43
30
0.42
Ta= 25ºC
100mA
50mA
y
Forward Current IF [mA]
20
20
30mA
20mA
0.41
10mA
5mA
0.40
10
1mA
0
-40
-20
0
20
40
60
80
100
o
Ambient Temperature Ta[ C]
Ambient Temperature
vs. Maximum Forward Current
0.39
0.43
0.44
0.45
0.46
0.47
x
Forward Current vs. Chromaticity Coordinate
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
IF= 20mA
1.2
3.2
Forward Voltage [V]
Relative Luminous Intensity
1.0
0.8
0.6
0.4
0.2
0.0
IF= 20mA
3.4
0
20
40
60
80
3.0
2.8
2.6
2.4
100
0
20
o
Ta= 25ºC, IF= 20mA
Relative Luminous Intensity
1.0
0.5
500
600
Wavelength [nm]
Spectrum
100
Ambient Temperature vs. Forward Voltage
Ta= 25ºC, IF= 20mA
1.0
80
Ambient Temperature Ta[ C]
Ambient Temperature vs. Relative Intensity
Relative Emission Intensity
60
o
Ambient Temperature Ta[ C]
0.0
400
40
700
0.8
0.6
0.4
0.2
0.0
-90
-60
-30
0
30
60
90
Off Axis Angle [deg.]
Directivity
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
6. Color & Binning
0.46
2500K
0.44
3175K
e
CIE(y)
0.42
f
Plankian line
g
0.40
h
0.38
0.36
0.40
0.42
0.44
0.46
0.48
0.50
0.52
CIE(x)
Rank e
Rank f
x
0.4390
0.4323
0.4864
0.4970
x
0.4323
0.4248
0.4769
0.4864
y
0.4310
0.4160
0.4294
0.4466
y
0.4160
0.3993
0.4137
0.4294
Rank g
Rank h
x
0.4248
0.4196
0.4689
0.4769
x
0.4196
0.4129
0.4588
0.4689
y
0.3993
0.3877
0.4004
0.4137
y
0.3877
0.3725
0.3838
0.4004
Note : Color Coordinates Measurement allowance is ± 0.01
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Bin Code Description
Bin Code
Luminous
Intensity
CIE
Forward Voltage
N
f
4
Luminous Intensity (mcd)
@ IF = 20mA
Bin
Code
Min.
Max.
M
1250
1650
N
1650
2500
O
2500
3500
Color Rank
@ IF = 20mA
e
f
Available ranks
g
h
Forward Voltage (V)
@ IF = 20mA
Bin
Code
Min.
Max.
2
2.6
2.8
3
2.8
3.0
4
3.0
3.2
5
3.2
3.4
6
3.4
3.6
7
3.6
3.8
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
7. Outline Dimensions
Unit : mm
-0.1
0.5 +0.2
1.0
DETAIL
0.5 ± 0.05
2.5 ± 0.05
ANODE
1.0 MIN
3.2 ± 0.2
1.0 MAX
1.0
28.0 MIN
8.7 ± 0.2
5.0 ± 0.2
5.9 ± 0.2
Notes : Protruded epoxy is 1.0mm maximum.
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
8. Packing
Unit : mm
* Antistatic poly bag
50
(500pcs max/bag)
95
325
170
* Inner box
(1bag max/box)
27
0
* Cardboard box
(35000pcs max/box)
(70boxes max/box)
480
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Unit : mm
12.0 ± 0.5
12.7 ± 0.2
0 ± 1.3
0 ± 2.0
0.5 ± 0.1
2.5 ± 0.5
12.7 ± 0.2
18 ± 0.5
13 ± 0.5
9.0 ± 0.5
Max 1.0
1.5 Max

4.0 ± 0.2
LXXXX
RANK : XXXX
QTY : 2000pcs
LOT : 20XX.XX.XX
SEOUL SEMICONDUCTOR CO., LTD
1 Box contain quantity.
* 3φ Series : 3000pcs/box
* 5φ Series : 2000pcs/box
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
9. Soldering Profile
1) Wave Soldering Conditions / Profile
• Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max).
• Soldering heat to be at 255 ºC (260ºC max) for 10 seconds
• Soak time above 200 ºC is 5 seconds
300
PEAK
250
200
255 ºC (260 ºC max)
O
Temperature [ C]
10s
150
PREHEAT
20s (60s Max)
100
85 ºC(120 ºC max)
50
0
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
T im e [s ]
2) Hand Soldering conditions
• Not more than 3 seconds at max. 350ºC, under Soldering iron.
3) Caution
• The LEDs must not be repositioned after soldering.
• Do not apply any stress to the lead particularly when heat.
Note : In case the soldered products are reused in soldering process, we don’t guarantee the products.
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
10. Precaution for Use
1) Storage
• Before opening the package
a. Avoid the absorption of moisture, we recommended to store the LEDs in a dry
box(or desiccator) with a desiccant . Otherwise, store them in the following environment:
Temperature : 5℃~30℃ Humidity : 50% max.
b. The products should be used in 3 months. It is recommended that the LEDs be used as
soon as possible.
• After opening the package
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40℃, Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
Components should be dried for 10-12hr at 60±5℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Avoid quick cooling
• Leadframes are silver plated SPCC. The silver plate surface may be affected by
environments which contains corrosive substances. Please avoid conditions which may cause
the LEDs to corrode, tarnish or discolor.
2) Lead Forming
• When the lead forming is required before soldering , care must be taken to avoid any bending
and mechanical stress. The stress to the base may damage the LEDs.
• When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly
aligned with the leads of the LEDs.
• It is recommended that tooling made to precisely form and cut the leads to length rather than
rely on hand operating.
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
3) Static Electricity
• Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist
band or an anti-electrostatic glove be used when handling the LEDs.
• All devices, equipment and machinery must be grounded properly. It is recommended that
precautions should be taken against surge voltage to the equipment that mounts the LEDs.
4) Heat Generation
• Thermal is one of the important parameters to design the end product. Please consider the
heat generation of the LEDs.
• The operating current should be decided after considering the ambient maximum temperature
of LEDs.
5) Others
• The color of the LEDs is changed slightly an operating current and thermal.
• Anti radioactive ray design is not considered for the products listed here.
• Gallium arsenide is used in some of the products listed in this publication. These products
are dangerous if they are burned or smashed in the process of disposal. It is also dangerous
to drink the liquid or inhale the gas generated by such products when chemically disposed.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA(Isopropyl Alcohol) should be used.
• When the LEDs are illuminating, operating current should be decided after considering the
junction temperature.
Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5
• The appearance and specifications of the product may be modified for improvement without
notice.
SEOUL SEMICONDUCTOR CO., LTD.
148-29,
Rev. 00
December 2007
www.ZLED.com
<080924> Rev. 0.1
Document No. : SSC-QP-7-07-24 (Rev.00)
Similar pages