NSC LM79L05ACM 3-terminal negative regulator Datasheet

LM320L/LM79LXXAC Series
3-Terminal Negative Regulators
General Description
The LM320L/LM79LXXAC dual marked series of 3-terminal
negative voltage regulators features fixed output voltages of
−5V, −12V, and −15V with output current capabilities in
excess of 100mA. These devices were designed using the
latest computer techniques for optimizing the packaged IC
thermal/electrical performance. The LM79LXXAC series,
even when combined with a minimum output compensation
capacitor of 0.1µF, exhibits an excellent transient response,
a maximum line regulation of 0.07% VO/V, and a maximum
load regulation of 0.01% VO/mA.
The LM320L/LM79LXXAC series also includes, as selfprotection circuitry: safe operating area circuitry for output
transistor power dissipation limiting, a temperature independent short circuit current limit for peak output current limiting,
and a thermal shutdown circuit to prevent excessive junction
temperature. Although designed primarily as fixed voltage
regulators, these devices may be combined with simple
external circuitry for boosted and/or adjustable voltages and
currents. The LM79LXXAC series is available in the 3-lead
TO-92 package, 8-lead SOIC package, and the 6-Bump
micro SMD package. The LM320L series is available in the
3-lead TO-92 package.
For output voltage other than −5V, −12V and −15V, the
LM137L series provides an output voltage range from 1.2V
to 47V.
Features
n Preset output voltage error is less than ± 5% overload,
line and temperature
n Specified at an output current of 100mA
n Easily compensated with a small 0.1µF output
capacitor
n Internal short-circuit, thermal and safe operating area
protection
n Easily adjustable to higher output voltages
n Maximum line regulation less than 0.07% VOUT/V
n Maximum load regulation less than 0.01% VOUT/mA
n See AN-1112 for micro SMD considerations
Typical Applications
Adjustable Output Regulator
Fixed Output Regulator
00774801
*Required if the regulator is located far from the power supply filter. A 1µF
aluminum electrolytic may be substituted.
**Required for stability. A 1µF aluminum electrolytic may be substituted.
00774803
−V0 = −5V − (5V/R1 + IQ) • R2,
5V/R1 > 3 IQ
Connection Diagrams
6-Bump micro SMD
TO-92 Plastic Package (Z)
00774802
Bottom View
00774820
Bump Side Down
© 2006 National Semiconductor Corporation
DS007748
www.national.com
LM320L/LM79LXXAC Series 3-Terminal Negative Regulators
March 2006
LM320L/LM79LXXAC
Connection Diagrams
(Continued)
SO-8 Plastic (Narrow Body)
00774804
Top View
Ordering Information
Package
Part Number
Package Marking
Transport Media
NSC Drawing
8-Lead SOIC
LM79L05ACM
LM79L05ACM
95 Units/Rail
M08A
LM79L05ACMX
LM79L12ACM
2.5k Units Tape and Reel
LM79L12ACM
95 Units/Rail
LM79L12ACMX
LM79L15ACM
2.5k Units Tape and Reel
LM79L15ACM
95 Units/Rail
LM79L15ACMX
3-Pin TO-92
6-Bump
micro SMD
www.national.com
2.5k Units Tape and Reel
LM79L05ACZ
320L79L05
1800 Units Per Box
LM79L12ACZ
320L79L12
1800 Units Per Box
LM79L15ACZ
320L79L15
1800 Units Per Box
LM79L15ACTL
XTPB
250 Units Tape and Reel
LM79L05ACTLX
3k Units Tape and Reel
2
Z03A
TLA06AMA
Operating Temperature Range
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Maximum Junction Temperature
0˚C to +70˚C
+125˚C
Storage Temperature Range
−55˚C to +150˚C
Lead Temperature
Input Voltage
(Soldering, 10 sec.)
VO = −5V, −12V, −15V
260˚C
−35V
Internal Power Dissipation (Note 2)
Internally Limited
Electrical Characteristics (Note 3)
TA = 0˚C to +70˚C unless otherwise noted.
Output Voltage
−5V
−12V
−15V
Input Voltage (unless otherwise noted)
−10V
−17V
−20V
Symbol
VO
Parameter
Output
Voltage
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
TJ = 25˚C, IO = 100mA
−5.2
−5
−4.8
−12.5
−12
−11.5
−15.6
−15
−14.4
1mA ≤ IO ≤ 100mA
−5.25
−4.75
−12.6
−11.4
−15.75
VMIN ≤ VIN ≤ VMAX
1mA ≤ IO ≤ 40mA
VMIN ≤ VIN ≤ VMAX
∆VO
Line
Regulation
Units
Conditions
(−20 ≤ VIN ≤ −7.5)
−5.25
−4.75
−11.4
(−27 ≤ VIN ≤ −14.5)
60
45
(−20 ≤ VIN ≤ −7.3)
(−27 ≤ VIN ≤ −14.6)
TJ = 25˚C, IO = 40mA
VMIN ≤ VIN ≤ VMAX
−12.6
(−20 ≤ VIN ≤ −7)
TJ = 25˚C, IO = 100mA
VMIN ≤ VIN ≤ VMAX
(−27 ≤ VIN ≤ −14.8)
−14.25
(−30 ≤ VIN ≤ −18)
−15.75
V
−14.25
(−30 ≤ VIN ≤ −17.5)
45
(−30 ≤ VIN ≤ −17.7)
60
45
(−20 ≤ VIN ≤ −7)
(−27 ≤ VIN ≤ −14.5)
(−30 ≤ VIN ≤ −17.5)
45
50
100
125
mV
V
mV
V
∆VO
Load
Regulation
∆VO
Long Term
Stability
IO = 100mA
20
IQ
Quiescent
Current
IO = 100mA
2
∆IQ
Quiescent
Current
1mA ≤ IO ≤ 100mA
Change
1mA ≤ IO ≤ 40mA
0.1
0.1
0.1
mA
IO = 100mA
0.25
0.25
0.25
mA
(−20 ≤ VIN ≤ −7.5)
(−27 ≤ VIN ≤ −14.8)
(−30 ≤ VIN ≤ −18)
V
40
96
120
µV
TJ = 25˚C
mV
1mA ≤ IO ≤ 100mA
VMIN ≤ VIN ≤ VMAX
Vn
48
6
2
0.3
Output Noise TJ = 25˚C, IO = 100mA
Voltage
60
6
2
0.3
mV/khrs
6
mA
0.3
f = 10Hz − 10kHz
Ripple
Rejection
TJ = 25˚C, IO = 100mA
50
52
50
dB
f = 120Hz
Input Voltage TJ = 25˚C, IO = 100mA
−7.3
−14.6
−17.7
V
Required to
−7.0
−14.5
−17.5
V
IO = 40mA
Maintain Line
Regulation
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits.
Note 2: Thermal resistance of Z package is 60˚C/W θJC, 232˚C/W θJA at still air, and 88˚C/W at 400 ft/min of air. The M package θJA is 180˚C/W in still air. The
maximum junction temperature shall not exceed 125˚C on electrical parameters.
Note 3: To ensure constant junction temperature, low duty cycle pulse testing is used.
3
www.national.com
LM320L/LM79LXXAC
Absolute Maximum Ratings (Note 1)
LM320L/LM79LXXAC
Typical Performance Characteristics
Maximum Average Power Dissipation (TO-92)
Peak Output Current
00774811
00774812
Short Circuit Output Current
Dropout Voltage
00774813
00774814
Output Voltage vs. Temperature
(Normalized to 1V @ 25˚C)
Ripple Rejection
00774815
www.national.com
00774816
4
LM320L/LM79LXXAC
Typical Performance Characteristics
(Continued)
Quiescent Current
Output Impedance
00774817
00774818
Typical Applications
± 15V, 100mA Dual Power Supply
00774806
5
www.national.com
LM320L/LM79LXXAC
Schematic Diagrams
−5V
00774809
−12V and −15V
00774810
www.national.com
6
LM320L/LM79LXXAC
Physical Dimensions
inches (millimeters) unless otherwise noted
SOIC Package (M)
NS Package Number M08A
Molded Offset TO-92 (Z)
NS Package Number Z03A
7
www.national.com
LM320L/LM79LXXAC Series 3-Terminal Negative Regulators
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING.
2. 63Sn/67Pb EUTECTIC BUMP.
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN A1 ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT.
6. REFERENCE JEEC REGISTRATION MO-211, VARIATION BC.
6-Bump micro SMD
NS Package Number TLA06AMA
X1 = 1006µm X2 = 1793µm X3 = 600µm
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
National Semiconductor
Americas Customer
Support Center
Email: [email protected]
Tel: 1-800-272-9959
www.national.com
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Support Center
Email: [email protected]
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: [email protected]
Tel: 81-3-5639-7560
Similar pages