Part Number: www.SunLED.com LMDG11W T-1 (3mm) SOLID STATE LAMP Features z LOW POWER CONSUMPTION. z POPULAR T-1 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Operating Characteristics (TA=25°C) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.9 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 640 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 22 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 150 mA mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LMDG11W Emitting Color Red Published Date : MAR 25, 2008 Unit MDG (InGaAlP) Reverse Voltage Storage Temperature MDG (InGaAlP) Emitting Material InGaAlP Lens-color Water Clear Drawing No : SDSA6555 Luminous Intensity (IF=20mA) mcd min. typ. 900 1495 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 640 34° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LMDG11W T-1 (3mm) SOLID STATE LAMP MDG Published Date : MAR 25, 2008 Drawing No : SDSA6555 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LMDG11W T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 25, 2008 Drawing No : SDSA6555 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 25, 2008 LMDG11W Drawing No : SDSA6555 LMDG11W V1 Checked : B.L.LIU P.4/4