SunLED LMO11D T-1 (3mm) solid state lamp Datasheet

Part Number:
www.SunLED.com
LMO11D
T-1 (3mm) SOLID STATE LAMP
Features
●LOW POWER CONSUMPTION.
●POPULAR T-1 DIAMETER PACKAGE.
●GENERAL PURPOSE LEADS.
●RELIABLE AND RUGGED.
●LONG LIFE - SOLID STATE RELIABILITY.
●AVAILABLE ON TAPE AND REEL.
●RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute maximum ratings
(TA=25°C)
MO
(InGaAlP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
195
mA
Power Dissipation
PT
75
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
°C
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Part
Number
LMO11D
Emitting
Color
Orange
Published Date : MAR 26,2008
Emitting
Material
InGaAlP
Operating Characteristics
(TA=25°C)
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
2.0
V
Forward Voltage (Max.)
(IF=20mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=20mA)
λP
610
nm
Wavelength of Dominant
Emission (Typ.)
(IF=20mA)
λD
601
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ
29
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
30
pF
Luminous
Intensity
(IF=20mA)
mcd
Lens-color
Orange Diffused
Drawing No : SDSA3523
MO
(InGaAlP)
V4
min.
typ.
280
795
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
610
40 °
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
LMO11D
T-1 (3mm) SOLID STATE LAMP
MO
Published Date : MAR 26,2008
Drawing No : SDSA3523
V4
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
LMO11D
T-1 (3mm) SOLID STATE LAMP
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 26,2008
Drawing No : SDSA3523
V4
Checked : B.L.LIU
P.3/4
Part Number:
www.SunLED.com
T-1 (3mm) SOLID STATE LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 26,2008
LMO11D
Drawing No : SDSA3523
LMO11D
V4
Checked : B.L.LIU
P.4/4
Similar pages