LMS1585A , LMS1587 www.ti.com SNVS061G – MONTH 2003 – REVISED JULY 2013 LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators Check for Samples: LMS1585A , LMS1587 FEATURES DESCRIPTION • Fast Transient Response • Available in Adjustable, 1.5V, and 3.3V versions • Current Limiting and Thermal Protection • Commercial Temp. Tange: 0°C to 125°C • Industrial Temp. Range: −40°C to 125°C • Line Regulation 0.005% (typical) • Load Regulation 0.05% (typical) • Direct Replacement for LT® 1585A/87 The LMS1585A and LMS1587 are low dropout positive regulators with output load current of 5A and 3A respectively. Their low dropout voltage (1.2V) and fast transient response make them an excellent solution for low voltage microprocessor applications. 1 234 APPLICATIONS • • • • Pentium® processor supplies PowerPC® supplies Other microprocessor supplies Low voltage logic supplies The LMS1585A/87 are available in adjustable versions, which can set the output voltage with only two external resistors. In addition, they are also available in 1.5V and 3.3V fixed voltage versions (1). The LMS1585A/87 circuits include a zener trimmed bandgap reference, current limiting and thermal shutdown. The LMS1585A/87 series are available in KTT (TO-263) and NDE (TO-220) packages. (1) Consult factory for other fixed voltage options. Typical Application VIN 4.75V 3.3V 3A, 5A LMS1585A/87-3.3 + + C1 10 µF C2* 10 µF * Required for Stability VOUT INPUT OUTPUT ADJ/GND Figure 1. NDE (TO-220) (Top View) INPUT Tab is VOUT OUTPUT ADJ/GND Figure 2. KTT (TO-263) (Top View) 1 2 3 4 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPC is a registered trademark of IBM. Pentium is a registered trademark of Intel Corporation. LT is a registered trademark of Linear Technology. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2003–2013, Texas Instruments Incorporated LMS1585A , LMS1587 SNVS061G – MONTH 2003 – REVISED JULY 2013 www.ti.com VIN Thermal Limit VOUT Substrate GND (Fixed Output) tADJ. (Adjustable Output)ttt Table 1. LMS1585A/LMS1587 Device Options Part Number Output Voltage LMS1585AIS-1.5 1.5V LMS1585AIS-3.3 3.3V LMS1585ACS-ADJ Adjustable LMS1585ACS-1.5 1.5V LMS1585ACS-3.3 3.3V LMS1585ACT-1.5 1.5V LMS1585ACT-3.3 3.3V LMS1587IS-ADJ Adjustable LMS1587IS-1.5 1.5V LMS1587IS-3.3 3.3V LMS1587CS-ADJ Adjustable LMS1587CS-3.3 3.3V LMS1587CS-1.5 1.5V LMS1587IT-1.5 1.5V LMS1587CT-ADJ Adjustable LMS1587CT-3.3 3.3V Operating Temperature Package Drawing Package Type Output Current -40°C to 125°C KTT TO-263 5A NDE TO-220 5A KTT TO-263 0°C to 125°C –40°C to 125°C 0°C to 125°C 3A –40°C to 125C 0°C to 125°C NDE TO-220 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 LMS1585A , LMS1587 www.ti.com SNVS061G – MONTH 2003 – REVISED JULY 2013 ABSOLUTE MAXIMUM RATINGS (1) (2) Maximum Input to Output Voltage (VIN to GND) Power Dissipation 13V (3) Internally Limited Junction Temperature (TJ) (3) 150˚C Storage Temperature Range -65˚C to 150˚C Lead Temperature 260˚C, 10 sec ESD Tolerance (4) (1) (2) (3) (4) 2000V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test conditions, see the Electrical Characteristics. If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications. The maximum power dissipation is a function of TJ(max) , θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)–T A)/θJA. All numbers apply for packages soldered directly into a PC board. For testing purposes, ESD was applied using human body model, 1.5 kΩ in series with 100 pF. Copyright © 2003–2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 Submit Documentation Feedback 3 LMS1585A , LMS1587 SNVS061G – MONTH 2003 – REVISED JULY 2013 www.ti.com ELECTRICAL CHARACTERISTICS Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade. Symbol VREF Reference Voltage VOUT Output Voltage ∆VOUT Line Regulation VIN−VOUT 4 (3) Load Regulation (3) ∆VOUT (1) (2) (3) Parameter Dropout Voltage Min (1) Typ (2) Max (1) Units LMS1585A-ADJ VIN−VOUT = 3V, IOUT = 10mA 10mA ≤ IOUT ≤ 5A, 1.5V ≤ VIN− VOUT ≤ 5.75V 1.238 1.225 1.250 1.250 1.262 1.275 V V LMS1587-ADJ 10mA ≤ IOUT ≤ 3A, 1.5V ≤ VIN−VOUT ≤ 5.75V 1.225 1.250 1.275 V LMS1585A-1.5 IOUT = 0mA, VIN = 5V 0 ≤ IOUT ≤ 5A, 3V ≤ VIN ≤ 7V 1.485 1.470 1.500 1.515 1.530 V V LMS1585A-3.3 I OUT = 0mA, V IN = 5V 0 ≤ I OUT ≤ 5A, 4.75V ≤ V IN ≤ 7V 3.267 3.235 3.300 3.300 3.333 3.365 V V LMS1587-1.5 V IN = 5V, I OUT = 0mA, TJ = 25˚C 0≤ I OUT ≤ 3A, 3V ≤ VIN ≤ 7V 1.485 1.470 1.500 1.500 1.515 1.530 V V LMS1587-3.3 0 ≤ I OUT ≤ 3A, 4.75V ≤ VIN ≤ 7V 3.235 3.300 3.365 V LMS1585A/87-ADJ IOUT = 10mA, 2.75V ≤ V IN ≤ 7V 0.005 0.2 % LMS1585A/87-3.3 I OUT = 0mA, 4.75V ≤ VIN ≤ 7V 0.005 0.2 % LMS1585A/87-1.5 I OUT = 0mA, 3V ≤ VIN ≤ 7V Conditions 0.005 0.2 % LMS1585A-ADJ VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 5A % 0.05 0.3 0.5 LMS1585A-1.5/LMS1585A-3.3 VIN = 5V, 0 ≤ IOUT ≤ 5A 0.05 0.05 0.3 0.5 % LMS1587-ADJ VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 3A 0.05 0.05 0.3 0.5 % LMS1587-1.5/LMS1587-3.3 VIN = 5V, 0 ≤ IOUT ≤ 3A 0.05 0.05 0.3 0.5 % % LMS1585A-ADJ/LMS1587-ADJ ∆VREF = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 ∆VOUT = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-ADJ ∆VREF = 1%, IOUT = 5A 1.2 1.4 V LMS1585A-1.5/LMS1585A-3.3 ∆VOUT = 1%, IOUT = 5A 1.2 1.4 V All limits are specified by testing or statistical analysis. Typical Values represent the most likely parametric norm. Load and line regulation are measured at constant junction temperature, and are ensured up to the maximum power dissipation of 30W. Power dissipation is determined by the input/output differential and the output current. Ensured maximum power dissipation will not be available over the full input/output range. Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 LMS1585A , LMS1587 www.ti.com SNVS061G – MONTH 2003 – REVISED JULY 2013 ELECTRICAL CHARACTERISTICS (continued) Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade. ILIMIT Current Limit LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5 VIN−VOUT = 5.5V 5.0 6.6 A LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5 VIN−VOUT = 5.5V 3.1 4.3 A Minimum Load Current (4) LMS1585A/87-ADJ 1.5V ≤ VIN−VOUT ≤ 5.75V Quiescent Current LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VIN = 5V Thermal Regulation TA = 25˚C, 30ms Pulse Ripple Rejection LMS1585A-ADJ fRIPPLE = 120Hz, VIN−VOUT = 3V, IOUT = 5A, COUT = 25µF Tantalum LMS1585A-1.5 fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 5A, VIN = 4.5V 7.0 13.0 mA 0.003 %/W 72 dB dB 72 dB LMS1587-ADJ fRIPPLE = 120 Hz, VIN−VOUT = 3V, IOUT = 3A COUT = 25 µF Tantalum 72 dB 72 dB 72 dB Adjust Pin Current 60 55 10mA ≤ IOUT ≤ IFULLLOAD, 1.5V ≤ VIN−VOUT ≤ 5.75V (5) Adjust Pin Current mA 72 LMS1587-3.3 fRIPPLE = 120 Hz, COUT = 25µF Tantalum, IOUT = 3A, VIN = 6.3V Temperature Stability (4) (5) 10.0 LMS1585A-3.3 fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 5A, VIN = 6.3V LMS1587-1.5 fRIPPLE = 120 Hz, COUT = 25µF Tantalum, IOUT = 3A, VIN = 4.5V 60 2.0 120 µA 0.2 µA 0.5 % Long Term Stability TA = 125˚C, 1000Hrs 0.03 % RMS Output Noise (% of VOUT) 10Hz ≤ f ≤ 10kHz 0.003 % Thermal Resistance Junction-to-Case 3-Lead KTT (TO-263): Control/Output Section 3-Lead NDE (TO-220): Control/Output Section 0.65/2.7 0.65/2.7 *C/W *C/W The minimum output current required to maintain regulation. IFULLLOAD is 5A for LMS1585A and 3A for LMS1587. Copyright © 2003–2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 Submit Documentation Feedback 5 LMS1585A , LMS1587 SNVS061G – MONTH 2003 – REVISED JULY 2013 www.ti.com APPLICATION NOTE OUTPUT VOLTAGE The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal. As shown in Figure 3, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage. The current IADJ from the adjustment terminal introduces an output error. But since it is small (120μA max), it becomes negligible when R1 is in the 100Ω range. For fixed voltage devices, R1 and R2 are integrated inside the devices. VIN VIN VOUT VOUT ADJ I1 VREF R1 10 µF 10 µF IADJ R2 R2) + IADJR2 VOUT = VREF (1 + R2 R1 Figure 3. Basic Adjustable Regulator 6 Submit Documentation Feedback Copyright © 2003–2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 PACKAGE OPTION ADDENDUM www.ti.com 16-Feb-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LMS1585ACS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585 ACS-1.5 LMS1585ACS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-1.5 LMS1585ACS-3.3 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585 ACS-3.3 LMS1585ACS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-3.3 LMS1585ACSX-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-1.5 LMS1585ACSX-3.3 NRND DDPAK/ TO-263 KTT 3 TBD Call TI Call TI 0 to 125 LMS1585 ACS-3.3 LMS1585ACSX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-3.3 LMS1585ACSX-ADJ NRND DDPAK/ TO-263 KTT 3 TBD Call TI Call TI 0 to 125 LMS1585 ACS-ADJ LMS1585ACSX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-ADJ LMS1585ACT-1.5 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1585ACT 1.5 LMS1585ACT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585ACT 1.5 LMS1585ACT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585 ACT-3.3 LMS1585AIS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1585 AIS-1.5 LMS1585AIS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-1.5 LMS1585AIS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-3.3 LMS1585AISX-3.3/NO PREVIEW DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-3.3 LMS1587CS-1.5 NRND DDPAK/ TO-263 KTT 3 TBD Call TI Call TI 0 to 125 LMS1587 CS-1.5 500 Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 16-Feb-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LMS1587CS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-1.5 LMS1587CS-3.3 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CS-3.3 LMS1587CS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-3.3 LMS1587CS-ADJ NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CS-ADJ LMS1587CS-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-ADJ LMS1587CSX-1.5 NRND DDPAK/ TO-263 KTT 3 TBD Call TI Call TI 0 to 125 LMS1587 CS-1.5 LMS1587CSX-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-1.5 LMS1587CSX-3.3 NRND DDPAK/ TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1587 CS-3.3 LMS1587CSX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-3.3 LMS1587CSX-ADJ NRND DDPAK/ TO-263 KTT 3 TBD Call TI Call TI 0 to 125 LMS1587 CS-ADJ LMS1587CSX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-ADJ LMS1587CT-3.3 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CT-3.3 LMS1587CT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587 CT-3.3 LMS1587CT-ADJ NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CT-ADJ LMS1587CT-ADJ/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587 CT-ADJ LMS1587IS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-1.5 LMS1587IS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-1.5 LMS1587IS-3.3 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-3.3 Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 16-Feb-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LMS1587IS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-3.3 LMS1587IS-ADJ NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-ADJ LMS1587IS-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-ADJ LMS1587ISX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-3.3 LMS1587ISX-ADJ NRND DDPAK/ TO-263 KTT 3 500 TBD Call TI Call TI -40 to 125 LMS1587 IS-ADJ LMS1587ISX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-ADJ LMS1587IT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 125 LMS1587 IT-1.5 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com 16-Feb-2017 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 2-Sep-2015 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMS1585ACSX-1.5/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1585ACSX-3.3/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1585ACSX-ADJ/NOP DDPAK/ B TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-1.5/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-3.3/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-ADJ/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-3.3 LMS1587ISX-3.3/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587ISX-ADJ DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587ISX-ADJ/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 2-Sep-2015 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMS1585ACSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1585ACSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1585ACSX-ADJ/NOP B DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-3.3 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587ISX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587ISX-ADJ DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587ISX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 Pack Materials-Page 2 MECHANICAL DATA NDE0003B www.ti.com MECHANICAL DATA KTT0003B TS3B (Rev F) BOTTOM SIDE OF PACKAGE www.ti.com IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using any particular TI Resource in any way, you (individually or, if you are acting on behalf of a company, your company) agree to use it solely for this purpose and subject to the terms of this Notice. TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. You understand and agree that you remain responsible for using your independent analysis, evaluation and judgment in designing your applications and that you have full and exclusive responsibility to assure the safety of your applications and compliance of your applications (and of all TI products used in or for your applications) with all applicable regulations, laws and other applicable requirements. You represent that, with respect to your applications, you have all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. You agree that prior to using or distributing any applications that include TI products, you will thoroughly test such applications and the functionality of such TI products as used in such applications. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. You are authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING TI RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY YOU AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. You agree to fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of your noncompliance with the terms and provisions of this Notice. This Notice applies to TI Resources. Additional terms apply to the use and purchase of certain types of materials, TI products and services. These include; without limitation, TI’s standard terms for semiconductor products http://www.ti.com/sc/docs/stdterms.htm), evaluation modules, and samples (http://www.ti.com/sc/docs/sampterms.htm). Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated