STMicroelectronics LMV321LILT Low-power, general-purpose operational amplifier Datasheet

LMV321L, LMV358L, LMV324L
Low-power, general-purpose operational amplifiers
Datasheet - production data
Description
SC70-5
The LMV321L, LMV358L, and LMV324L are
single, dual and quad operational amplifiers with
rail-to-rail output capabilities. They are specifically
designed to operate at low voltages (2.7 V to 5 V)
with enhanced performances compared to the
industry standard LM3xx series.
SOT23-5
The LMV321L, LMV358L, and LMV324L are
offered in tiny packages, allowing the devices to
be used in small portable electronic applications
and to be placed closer to the actual signal.
MiniSO8
TSSOP14
SO8
The LMV321L, LMV358L, and LMV324L are
complete cost-effective solutions for application
designs where cost is of primary importance.
SO14
Features
• Low-power consumption: 250 µA max at 5 V
• Low offset voltage: 7 mV max at 25 °C
• Industrial temperature range: -40 °C to +125 °C
• Low supply voltage: 2.7 V - 5.5 V
• Gain bandwidth product: 1.3 MHz
• Tiny packages
Applications
• Battery-powered applications
• Portable devices
• Signal conditioning
• Active filtering
• Medical instrumentation
December 2013
This is information on a product in full production.
DocID023066 Rev 2
1/20
www.st.com
Contents
LMV321L, LMV358L, LMV324L
Contents
1
Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
4.1
Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.2
Input common-mode range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.3
Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.4
Input offset voltage drift over temperature . . . . . . . . . . . . . . . . . . . . . . . . .11
4.5
PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.6
Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.1
SC70-5 (SOT323-5) package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2
SOT23-5 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.3
MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.4
SO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.5
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.6
SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2/20
DocID023066 Rev 2
LMV321L, LMV358L, LMV324L
1
Package pin connections
Package pin connections
Figure 1. Pin connections for each package (top view)
In+
1
Vcc-
2
In-
3
5
4
Vcc+
Out
Out1
1
8
Vcc+
In1-
2
7
Out2
In1+
3
6
In2-
Vcc-
4
5
In2+
SC70-5/SOT23-5
MiniSO8/SO8
Out1
1
14
Out4
In1-
2
13
In4-
In1+
3
12
In4+
Vcc+
4
11
Vcc-
In2+
5
10
In3+
In2-
6
9
In3-
Out2
7
8
Out3
TSSOP14/SO14
DocID023066 Rev 2
3/20
20
Absolute maximum ratings and operating conditions
2
LMV321L, LMV358L, LMV324L
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
VCC
Vid
Vin
Iin
Tstg
Parameter
Supply voltage
Value
(1)
6
Differential input voltage
(2)
±VCC
(3)
Input pins (IN+ and IN- pins) voltage
Input current
Tj
Storage temperature
ESD
10
mA
-65 to +150
°C
(5)(6)
SC70-5
205
SOT23-5
250
MiniSO8
190
SO8
125
TSSOP14
100
SO14
105
Maximum junction temperature
HBM: human body
MM: machine
model(7)
model(8)
CDM: charged device
V
VCC- - 0.3 to VCC++ 0.2
(4)
Thermal resistance junction to ambient
Rthja
Unit
model(9)
Latch-up immunity
°C/W
150
°C
4000
V
250
1300
200
mA
1. All voltage values, except differential voltage, are with respect to network ground terminal.
2. Differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
3. VCC-Vin must not exceed 6 V, Vin must not exceed 6 V.
4. Input current must be limited by a resistor in series with the inputs.
5. Short-circuits can cause excessive heating and destructive dissipation.
6. Rth are typical values.
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
9. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to the ground.
Table 2. Operating conditions
Symbol
4/20
Parameter
VCC
Supply voltage
Vicm
Common mode input voltage range
Toper
Operating free-air temperature range
Value
2.7 to 5.5
DocID023066 Rev 2
VCC- - 0.2 to VCC+ - 1
-40 to +125
Unit
V
°C
LMV321L, LMV358L, LMV324L
3
Electrical characteristics
Electrical characteristics
Table 3. Electrical characteristics at VCC+ = 2.7 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 ° C, and
RL connected to VCC/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
1
7
mV
DC performance
Vio
ΔVio/ΔT
Input offset voltage
Input offset voltage drift
Iio
Input offset current
Iib
Input bias current
CMRR
(1)
Common mode rejection ratio(1)
VO
Output swing
ICC
Supply current (per channel)
-40 °C < T< 125 °C
μV/°C
5
Vout = Vcc/2
0.5
30
27
60
nA
Vic = 0 V to Vcc-1 V, Vout = Vcc/2
70
75
dB
RL = 10 kΩ, high level
2.6
2.69
V
RL = 10 kΩ, low level
65
180
mV
No load, Vout = VCC/2
120
180
µA
AC performance
GBP
Gain bandwidth product
1.3
MHz
60
degrees
10
dB
Φm
Phase margin
Gm
Gain margin
SR
Slew rate
RL > 1 MΩ, CL = 200 pF
Vout = 0.5 V to VCC - 0.5V
0.6
V/μs
en
Equivalent input noise voltage
f = 1 kHz
f = 10 kHz
31
20
nV
-----------Hz
in
Equivalent input noise current
f = 1 kHz
0.30
-----------Hz
RL > 1 MΩ, CL = 200 pF
pA
1. CMRR (dB) = 20 log (ΔVicm/ΔVio).
DocID023066 Rev 2
5/20
20
Electrical characteristics
LMV321L, LMV358L, LMV324L
Table 4. Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and
RL connected to VCC/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
1
7
Unit
DC performance
Vio
ΔVio/ΔT
Iio
Iib
Input offset voltage
Input offset voltage drift(1)
SVRR
VOH
-40 °C < T< 125 °C
0.5
27
-40 °C < T< 125 °C
ratio(2)
72
75
Supply voltage rejection ratio
Vcc = 2.7 to 5 V
72
79
Large signal voltage gain
RL= 2 kΩ,
Vout = 0.5 V to (VCC-0.5 V)
90
100
-40 °C < T< 125 °C
80
RL = 10 kΩ
4.90
RL = 10 kΩ, -40 °C < T< 125 °C
4.80
RL = 2 kΩ
4.70
RL = 2 kΩ, -40 °C < T< 125 °C
4.60
RL = 10 kΩ
VOL
Output swing low level
Output short circuit current
ICC
Supply current (per channel)
dB
V
4.96
65
RL = 10 kΩ, -40 °C < T< 125 °C
180
280
RL = 2 kΩ
120
300
mV
400
Sinking, Vout = VCC
35
43
Sourcing, Vout = 0 V
60
70
No load, Vout = VCC/2
nA
4.99
RL = 2 kΩ, -40 °C < T< 125 °C
Iout
60
110
Vic = 0 V to Vcc-1 V,Vout = Vcc/2
Output swing high level
30
50
Vout = Vcc/2
mV
μV/°C
5
-40 °C < T< 125 °C
Input bias current
Common mode rejection
9
Vout = Vcc/2
Input offset current
CMRR
Avd
-40 °C < T< 125 °C
130
-40 °C < T< 125 °C
mA
250
350
µA
AC performance
GBP
6/20
1.3
Gain bandwidth product
Fu
Unity gain frequency
Φm
Phase margin
Gm
Gain margin
SR
Slew rate
RL > 1 MΩ, CL = 200 pF
RL > 1 MΩ, CL = 200 pF
Vout = 0.5 V to VCC - 0.5V
DocID023066 Rev 2
1
MHz
60
degrees
10
dB
0.7
V/μs
LMV321L, LMV358L, LMV324L
Electrical characteristics
Table 4. Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and
RL connected to VCC/2 (unless otherwise specified) (continued)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
en
Equivalent input noise voltage
f = 1 kHz
f = 10 kHz
30
20
nV
-----------Hz
in
Equivalent input noise current
f = 1 kHz
0.30
-----------Hz
pA
1. See Section 4.4: Input offset voltage drift over temperature.
2. CMRR (dB) = 20 log (ΔVicm/ΔVio).
DocID023066 Rev 2
7/20
20
Electrical characteristics
LMV321L, LMV358L, LMV324L
Figure 2. Supply current vs. supply voltage at
Vicm = VCC/2
Figure 3. Input offset voltage vs. input common
mode voltage at VCC = 5 V
0.20
1.0
T=25°C
0.9
Input Offset Voltage (mV)
Supply Current (mA)
T=85°C
0.15
0.10
T=-40°C
0.05
0.8
0.7
0.6
0.5
3.5
4.0
4.5
Supply Voltage (V)
5.0
5.5
Figure 4. Output current vs. output voltage at
VCC = 2.7 V
Vcc=5V
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Input Common Mode Voltage (V)
3.5
4.0
Figure 5. Output current vs. output voltage at
VCC = 5 V
30
20
T=-40°C
0.2
0.0
3.0
T=25°C
0.3
0.1
Vicm=Vcc/2
0.00
T=125°C
0.4
100
Sink
Vid=-1V
Sink
75 Vid=-1V
T=-40°C
T=25°C
T=25°C
T=125°C
0
T=-40°C
Vcc=2.7V
-10 T=125°C
T=-40°C
T=25°C
25
1.0
1.5
2.0
Output Voltage (V)
2.5
5.0
-45
T=25°C
-90
20
Vicm=Vcc/2
-25
T=-40°C
10
Phase
0
T=85°C
Source
Vid=1V
4.5
0
30
Gain (dB)
Output Current (mA)
4.0
Gain
T=-40°C
-10
T=125°C
-20
DocID023066 Rev 2
10k
-135
-180
Vcc=5V
Vicm=2.5V
Rl=50kΩ
Cl=200pF
Gain=-100
T=25°C
T=-40°C
-100
2.8 3.0 3.3 3.5 3.8 4.0 4.3 4.5 4.8 5.0 5.3 5.5
Supply Voltage (V)
8/20
1.5 2.0 2.5 3.0 3.5
Output Voltage (V)
T=85°C
0
-75
1.0
40
T=25°C
25
-50
0.5
Figure 7. Voltage gain and phase with
Cl = 200 pF
100
50
Source
Vid=1V
T=-40°C
-100
0.0
Figure 6. Output current vs. supply voltage at
Vicm = VCC/2
Sink
75 Vid=-1V
T=25°C
-75
Source
Vid=1V
0.5
T=125°C
Vcc=5V
-50
-20
-30
0.0
T=125°C
0
-25
100k
1M
Frequency (Hz)
-225
-270
10M
Phase (°)
10
Output Current (mA)
Output Current (mA)
50
LMV321L, LMV358L, LMV324L
Electrical characteristics
Figure 8. Gain margin vs. load capacitor at
VCC = 5 V
Figure 9. Phase margin vs. load capacitor at
VCC = 5 V
20
18
90
70
T=125°C
10
Rl=100kΩ
8
5
T=25°C
T=125°C
1000
100
Load Capacitor (pF)
Figure 11. Phase margin vs. output current at
VCC = 5 V
Sink
Cl=500pF
60
Phase Margin (°)
Cl=200pF
Cl=100pF
-10
100k
Frequency (Hz)
1M
Cl=200pF
40
30
20
Vcc=5V
Vicm=2.5V
Vload=2.5V
Rl=10KΩ
T=25°C
0
-1.0 -0.8 -0.6 -0.4 -0.2 0.0
10M
Figure 12. Positive and negative slew rate vs.
supply voltage
Cl=100pF
50
10
Cl=45pF
10k
Source
70
0
-5
1000
80
Vcc=5V
Vicm=2.5V
10
Rl=10kΩ
T=25°C
5
Cl=1000pF
Gain (dB)
T=-40°C
10
15
0.2
0.4
0.6
0.8
1.0
Output Current (mA)
Figure 13. Positive slew rate at VCC = 5 V with
Cl = 100 pF
2.0
0.8
1.5
0.5
1.0
T=-40°C
0.3
T=25°C
Cl=100pF
Rl=2kΩ
Vicm=Vcc/2
Vload=Vcc/2
T=125°C
0.0
T=125°C
T=25°C
T=-40°C
Output Voltage (V)
Slew rate (V/µs)
30
20
Figure 10. Closed-loop gain in voltage follower
configuration for different capacitive loads
-0.3
Rl=100kΩ
40
0
100
Load Capacitor (pF)
-15
1k
50
T=-40°C
Vcc=5V
3 Vicm=2.5V
Vload=2.5V
0
Rl=600Ω
60
Phase Margin (°)
Gain Margin (dB)
15
13
Vcc=5V
Vicm=2.5V
Vload=2.5V
80
T=25°C
Rl=600Ω
-0.5
T=125°C
0.5
0.0
T=25°C
-0.5
-1.0
Vcc=5V
Vicm=Vcc/2
Cl=100pF
Rl=1MΩ
T=-40°C
-1.5
-0.8
3.0
3.5
4.0
4.5
Supply Voltage (V)
5.0
5.5
DocID023066 Rev 2
-2.0
-1
0
1
2
3
4
5
Time (µs)
6
7
8
9
9/20
20
Electrical characteristics
LMV321L, LMV358L, LMV324L
2.0
Vcc=5V
Vicm=Vcc/2
Cl=100pF
Rl=1MΩ
1.5
Output Voltage (V)
1.0
T=-40°C
0.5
T=25°C
0.0
T=125°C
-0.5
-1.0
-1.5
-2.0
-1
0
1
2
3
4
5
Time (µs)
6
7
8
9
Figure 16. Distortion + noise vs. frequency
Figure 15. Noise vs. frequency
Equivalent Input Noise Voltage Density (nV/VHz)
Figure 14. Negative slew rate at VCC = 5 V with
Cl = 100 pF
-1
100
Vcc=5V
80
60
Vcc=2.7V
40
20
0
100
1000
Frequency (Hz)
10000
-1
10
Vcc=5V
BW=80kHz
Vin=1Vpp
Gain=1
Vicm=Vcc/2
T=25°C
-2
10
Rl=10kΩ
-3
-3
10
-4
10
100
1000
Frequency (Hz)
Rl=2kΩ
-2
10
Rl=2kΩ
THD + N (%)
THD + N (%)
Vicm=Vcc/2
T=25°C
120
Figure 17. Distortion + noise vs. output voltage
10
10/20
140
Vcc=5V
Gain=1
BW=22kHz
Vicm=Vcc/2
T=25°C
10
0.01
10000
DocID023066 Rev 2
Rl=10kΩ
0.1
1
Output Voltage (Vpp)
10
LMV321L, LMV358L, LMV324L
Application information
4
Application information
4.1
Operating voltages
The LMV321L, LMV358L, and LMV324L can operate from 2.7 to 5.5 V. The devices’
parameters are fully specified for 2.7 V and 5 V power supplies. Additionally, the main
specifications are guaranteed in extended temperature ranges from -40 ° C to +125 ° C.
4.2
Input common-mode range
The LMV321L, LMV358L, and LMV324L have an input common-mode range that includes
ground. The input common-mode range is extended from VCC- - 0.2 V to VCC+ - 1 V, with no
output phase reversal.
4.3
Rail-to-rail output
The operational amplifiers’ output levels can go close to the rails: 180 mV maximum above
and below the rail when connected to a 10 kΩ resistive load to VCC/2.
4.4
Input offset voltage drift over temperature
The maximum input voltage drift over the temperature variation is defined as follows.
ΔVio
Vio ( T ) – Vio ( 25° C )
------------- = max ----------------------------------------------------ΔT
T – 25° C
for Tmin < T < Tmax.
4.5
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible
to the power supply pins.
4.6
Macromodel
Accurate macromodels of the LMV321L, LMV358L, and LMV324L are available on
STMicroelectronics’ web site at www.st.com. These models are a trade-off between
accuracy and complexity (that is, time simulation) of the LMV321L, LMV358L, and LMV324L
operational amplifiers. They emulate the nominal performances of a typical device within the
specified operating conditions mentioned in the datasheet. They also help to validate a
design approach and to select the right operational amplifier, but they do not replace onboard measurements.
DocID023066 Rev 2
11/20
20
Package information
5
LMV321L, LMV358L, LMV324L
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
12/20
DocID023066 Rev 2
LMV321L, LMV358L, LMV324L
5.1
Package information
SC70-5 (SOT323-5) package information
Figure 18. SC70-5 (SOT323-5) package mechanical drawing
SIDE VIEW
DIMENSIONS IN MM
GAUGE PLANE
COPLANAR LEADS
SEATING PLANE
TOP VIEW
Table 5. SC70-5 (or SOT323-5) package mechanical data
Dimensions
Ref
Millimeters
Min
A
Typ
0.80
A1
Inches
Max
Min
1.10
0.315
Typ
0.043
0.10
A2
0.80
b
0.90
Max
0.004
1.00
0.315
0.035
0.15
0.30
0.006
0.012
c
0.10
0.22
0.004
0.009
D
1.80
2.00
2.20
0.071
0.079
0.087
E
1.80
2.10
2.40
0.071
0.083
0.094
E1
1.15
1.25
1.35
0.045
0.049
0.053
e
0.65
0.025
e1
1.30
0.051
L
0.26
<
0°
0.36
0.46
0.010
8°
0°
DocID023066 Rev 2
0.014
0.039
0.018
8°
13/20
20
Package information
5.2
LMV321L, LMV358L, LMV324L
SOT23-5 package information
Figure 19. SOT23-5 package mechanical drawing
GAMS1812131437CB
Table 6. SOT23-5 package mechanical data
Dimensions
Ref.
A
Millimeters
Min.
Typ.
Max.
Min.
Typ.
Max.
0.90
1.20
1.45
0.035
0.047
0.057
A1
14/20
Inches
0.15
0.006
A2
0.90
1.05
1.30
0.035
0.041
0.051
B
0.35
0.40
0.50
0.013
0.015
0.019
C
0.09
0.15
0.20
0.003
0.006
0.008
D
2.80
2.90
3.00
0.110
0.114
0.118
D1
1.90
0.075
e
0.95
0.037
E
2.60
2.80
3.00
0.102
0.110
0.118
F
1.50
1.60
1.75
0.059
0.063
0.069
L
0.10
0.35
0.60
0.004
0.013
0.023
K
0°
10 °
0°
DocID023066 Rev 2
10 °
LMV321L, LMV358L, LMV324L
5.3
Package information
MiniSO8 package information
Figure 20. MiniSO8 package mechanical drawing
Table 7. MiniSO8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.1
A1
0
A2
0.75
b
Max.
0.043
0.15
0
0.95
0.030
0.22
0.40
0.009
0.016
c
0.08
0.23
0.003
0.009
D
2.80
3.00
3.20
0.11
0.118
0.126
E
4.65
4.90
5.15
0.183
0.193
0.203
E1
2.80
3.00
3.10
0.11
0.118
0.122
e
L
0.85
0.65
0.40
0.60
0.006
0.033
0.026
0.80
0.016
0.024
L1
0.95
0.037
L2
0.25
0.010
k
ccc
0°
0.037
8°
0.10
DocID023066 Rev 2
0°
0.031
8°
0.004
15/20
20
Package information
5.4
LMV321L, LMV358L, LMV324L
SO8 package information
Figure 21. SO8 package mechanical drawing
Table 8. SO8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.75
0.25
Max.
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
L1
k
ccc
16/20
Inches
1.04
0°
0.040
8°
0.10
DocID023066 Rev 2
1°
8°
0.004
LMV321L, LMV358L, LMV324L
5.5
Package information
TSSOP14 package information
Figure 22. TSSOP14 package mechanical drawing
Table 9. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.20
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.176
e
L
0.65
0.45
L1
k
aaa
1.00
0.60
0.0256
0.75
0.018
1.00
0°
0.024
0.030
0.039
8°
0.10
DocID023066 Rev 2
0°
8°
0.004
17/20
20
Package information
5.6
LMV321L, LMV358L, LMV324L
SO14 package information
Figure 23. SO14 package mechanical drawing
Table 10. SO14 package mechanical data
Dimensions
Millimeters
Inches
Ref.
Min.
Typ.
Max.
Min.
Max.
A
1.35
1.75
0.05
0.068
A1
0.10
0.25
0.004
0.009
A2
1.10
1.65
0.04
0.06
B
0.33
0.51
0.01
0.02
C
0.19
0.25
0.007
0.009
D
8.55
8.75
0.33
0.34
E
3.80
4.0
0.15
0.15
e
1.27
0.05
H
5.80
6.20
0.22
0.24
h
0.25
0.50
0.009
0.02
L
0.40
1.27
0.015
0.05
k
ddd
18/20
Typ.
8 ° (max.)
0.10
DocID023066 Rev 2
0.004
LMV321L, LMV358L, LMV324L
6
Ordering information
Ordering information
Table 11. Order codes for devices without shutdown feature
Order code
Package
Packing
Marking
LMV321LICT
SC70-5
K25
LMV321LILT
SOT23-5
K170
LMV358LIST
-40° C to +125 ° C
LMV358LIDT
7
Temperature range
MiniSO8
SO8
Tape and reel
K170
LMV358L
LMV324LIPT
TSSOP14
LMV324L
LMV324LIDT
SO14
LMV324L
Revision history
Table 12.
Document revision history
Date
Revision
Changes
04-May-2012
1
Initial release.
19-Dec-2013
2
New template
DocID023066 Rev 2
19/20
20
LMV321L, LMV358L, LMV324L
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
20/20
DocID023066 Rev 2
Similar pages