Panasonic LNJ247W82RA Hight bright surface mounting chip led Datasheet

This product complies with the RoHS Directive (EU 2002/95/EC).
LNJ247W82RA
Hight Bright Surface Mounting Chip LED
1005 Type
 Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol
Rating
Unit
Power dissipation
PD
55
mW
Forward current
IF
20
mA
Pulse forward current *
IFP
60
mA
Reverse voltage
VR
4
V
Operating ambient temperature
Topr
–30 to +85
°C
Storage temperature
Tstg
–40 to +100
°C
 Lighting Color
 Red
Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.
 Electro-Optical Characteristics Ta = 25°C±3°C
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
5.8
16.0
26.8
mcd
100
µA
2.30
V
Luminous intensity *1
IO
IF = 5 mA
Reverse current
IR
VR = 4 V
Forward voltage
VF
IF = 5 mA
1.95
Peak emission wavelength
λP
IF = 5 mA
645
Dominant emission wavelength *2
λd
IF = 5 mA
Spectral half band width
Δλ
IF = 5 mA
620
nm
630
640
nm
20
nm
Note) *1: Measurement tolerance: ±20%
*2: Measurement tolerance: ±2 nm
IO  IF
10
1
10
Forward current IF (mA)
10
1
1.5
100
1 000
Relative luminous intensity (%)
100
1
IF  VF
100
Forward current IF (mA)
Luminous intensity IO (mcd)
1000
1.7
1.9
2.1
2.3
80
Directive characteristics
X
−30°
X
Y −40°
60
0°
−20° −10°
Peak emission wavelength λP (nm)
Publication date: October 2010
60°
70°
20°
−80°
650
50°
40°
−70°
600
40°
60°
−60°
0
550
30°
80°
−50°
−90°
700 100
10° 20°
80
60
40
20
0
60
90
30
20
10
80°
20
40
60
Relative luminous intensity (%)
Ver. AEK
Forward current IF (mA)
Relative luminous intensity (%)
Y
30
IF  Ta
40
100
20
0
Ambient temperature Ta (°C)
Relative luminous intensity  λP
40
100
10
−30
2.5
Forward voltage VF (V)
Relative luminous intensity  Ta
80
90°
100
0
−30
0
30
60
90
Ambient temperature Ta (°C)
1
This product complies with the RoHS Directive (EU 2002/95/EC).
LNJ247W82RA
 Package (Unit: mm)
KLTFTN2K4700
 Pin name
1: Anode
2: Cathode
2
Ver. AEK
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
Similar pages