Part Number: www.SunLED.com LNWA11W T-1 (3mm) SOLID STATE LAMP PRELIMINARY SPEC Features ●LOW POWER CONSUMPTION. ●POPULAR T-1 DIAMETER PACKAGE. ●GENERAL PURPOSE LEADS. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) NWA (InGaN) Operating Characteristics (TA=25°C) Unit NWA (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=20mA) VF 3.2 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Forward Voltage (Max.) (IF=20mA) VF 4.0 V Power Dissipation PT 120 mW Operating Temperature TA -40 ~ +85 Reverse Current (Max.) (VR=5V) IR 10 uA Tstg -40 ~ +85 X 0.31 Y 0.31 C 100 Storage Temperature Electrostatic Discharge Threshold (HBM) 1000 °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LNWA11W Emitting Color White Published Date : MAR 26, 2008 Emitting Material InGaN Chromaticity Coordinates (Typ.) v Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA5133 V4 pF Viewing Angle 2 θ 1/2 min. typ. 280 1195 Checked : B.L.LIU 34° P.1/5 Part Number: www.SunLED.com LNWA11W T-1 (3mm) SOLID STATE LAMP NWA Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com LNWA11W T-1 (3mm) SOLID STATE LAMP LNWA11W White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 b4 0.35 c0 0.34 0.33 b3 0.32 0.31 b1 b2 0.30 a1 0.29 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b2 Reference CCT: 9000~5600k b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Published Date : MAR 26, 2008 Reference CCT: 7600~5600k Reference CCT: 6000~4600k Drawing No : SDSA5133 V4 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com LNWA11W T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or chromaticity), the typical accuracy of the sorting process is as follows: 1. Measurement tolerance of the chromaticity coordinates is ±0.02. 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26, 2008 Drawing No : SDSA5133 V4 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 26, 2008 LNWA11W T-1 (3mm) SOLID STATE LAMP Drawing No : SDSA5133 LNWA11W V4 Checked : B.L.LIU P.5/5