NKK LP0115CMKW01F Short body pushbutton Datasheet

Short Body Pushbuttons
Series LP01
Distinctive Characteristics
Environmentally friendly components and packaging materials meet RoHS Directive
restricting use of hazardous materials. Suited for lead-free soldering because of
heat resistant resin materials.
Smooth, slightly concave surface of cap designed to fit fingertip.
Unique design and construction of cap prevents its
removal and limits tampering.
Short body of .551” (14.0mm) conserves
behind-panel space.
Combination solder lug and .110” quick
connect terminals are epoxy sealed to lock
out flux, dust, solvents, and other contaminants.
Crisp actuation and clear circuit status provided by
snap-action contact mechanism. Arc barrier between
movable contacts protects against crossover.
Illuminated models available and shown in the Illuminated
Pushbutton section.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Short Body Pushbuttons
Series LP01
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Travel:
Materials & Finishes
Actuator:
Housing:
Base:
Movable Contact:
Stationary Contacts:
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Installation
Mounting Torque:
Soldering Time & Temperature:
Cleaning:
Standards & Certifications
Flammability Standards:
UL Recognition:
C-UL Recognition:
R
3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
50 milliohms maximum
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts & case for 1 minute minimum
500,000 operations minimum
50,000 operations minimum
1.5N for Single Pole; 3.0N for Double Pole
Nonshorting (break-before-make)
Total Travel .118” (3.0mm)
Polycarbonate
Bushing mount: Glass fiber reinforced polyamide (UL94V-0);
Snap-in mount: Polyphenylene ether (UL94V-0)
Diallyl phthalate (UL94V-0)
Phosphor bronze & silver with silver plating
Common terminal: Phosphor bronze with silver plating;
Contact terminals: Phosphor bronze with tin & copper plating
–25°C through +70°C (–13°F through +158°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
0.8Nm (7.08 lb • in)
Manual Soldering: See Profile A in Supplement section.
Hand clean locally with alcohol based solution.
UL94V-0 housing & base
All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch
All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Series LP01
Short Body Pushbuttons
TYPICAL SWITCH ORDERING EXAMPLE
L P 01
1
POLES
5
C
C
K
MOUNTING TYPES
1
SPDT
C
Bushing
2
DPDT
M
Snap-in
HOUSING
K
Black
ON
A
CAP COLORS
A
Black
C
Red
F
Green
CONTACTS & TERMINALS
CIRCUIT
5
W01
(ON)
W01
( ) = Momentary
Silver Contacts
Rated 3A @ 125V AC/250V AC
Solder Lug/Quick Connect Terminals
IMPORTANT:
Switches are supplied without UL & C-UL marking unless specified. Specific models & ratings
noted on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
LP0115CCKW01A
Black Cap
Bushing Mount
Silver Contacts
Rated 3A @ 125/250V AC
Solder Lug/ Quick Connect Terminals
SPDT
ON-(ON) Circuit
Black Housing
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Series LP01
Short Body Pushbuttons
POLES & CIRCUIT
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch Schematics
Normal
Down
Normal
Down
1-3
1-2
Pole
Model
SP
LP0115
ON
(ON)
DP
LP0125
ON
(ON)
Note: Terminal markings “COM, NO and
NC” are actually on the switch;
terminal numbers are not on the switch.
1 (COM)
SPDT
3
2
1 (COM)
1-3
4-6
1-2
4-5
DPDT
3
2
4
6
5
MOUNTING TYPES
C
M
Bushing
Snap-in
.669” (17.0mm) Diameter
.630” (16.0mm) Diameter
This mounting option is
supplied with a brass
hexagon nut with
nickel plating.
Recommended Panel Thickness:
Recommended Panel Thickness:
.079” ~ .256”
(2.0mm ~ 6.5mm)
.039” ~ .126”
(1.0mm ~ 3.2mm)
(16.0)
.630
+ 0.2
– 0.0
Dia
0.2
(18.1) +– 0.0
.713
(1.7) +– 0.0
0.1
.067
0.1
(7.5) –+ 0.0
.295
0.2
(1.1) +– 0.0
R
.043
0.2
(17.3) +– 0.0
Dia
.681
Allow .827” (21.0mm) distance between
switches when mounted side-by-side.
Allow .984” (25.0mm) distance between
switches when mounted side-by-side.
HOUSING
K
Black
Housing available in black only. The one-piece body and bezel have a matte finish.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Short Body Pushbuttons
Series LP01
CONTACT MATERIALS, RATINGS, & TERMINALS
W01
Silver
Power Level
Solder Lug/.110” (2.8mm) Quick Connect
3A @ 125V AC/250V AC; 3A @ 30V DC
Epoxy Seal
(7.3)
.287
(2.0)
.079
(2.8)
.110
Note: If used at 1A @ 125V AC/250V AC
or 1A @ 30V DC, electrical life will be
100,000 operations minimum.
(0.6) R
.024
(1.2)
.047
Thk = (0.5)
.020
CAP COLORS
A
C
F
Black
The cap is an integral part of the switch and is not available separately.
Red
Material: Polycarbonate
Finish: Matte
Green
TYPICAL SWITCH DIMENSIONS
Bushing Mount • Single Pole
(1.2) x (2.0) Typ
.047 x .079
M16 P1
(0.5) Typ
.020
NO
3
(13.6) Dia
.535
(20.0) Dia
.787
(2.5)
.098
(7.3)
.287
1
COM
(3.0)
.118
(5.55)
.219
(21.3)
.838
(5.5)
.217
L
–+
2
(2.8) Typ
.110
NC
NO
(9.7)
.382
LP0115CCKW01A
Bushing Mount • Double Pole
(1.2) x (2.0) Typ
.047 x .079
M16 P1
(0.5) Typ
.020
NO
(2.8) Typ
.110
(13.6) Dia
.535
(20.0) Dia
.787
(2.5)
.098
(5.5)
.217
(7.3)
.287
(21.3)
.838
NC
6
L
–+
1
NO
3
2
5
(9.7)
.382
4
COM
(6.0)
.236
(11.1)
.437
LP0125CCKW01F
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Short Body Pushbuttons
Series LP01
TYPICAL SWITCH DIMENSIONS
Snap-in • Single Pole
(1.2) x (2.0) Typ
.047 x .079
(0.5) Typ
.020
NO
(13.6) Dia
.535
(20.0) Dia
.787
(2.5)
.098
1
COM
(7.3)
.287
(3.0)
.118
(5.55)
.219
(21.3)
.838
(5.5)
.217
L
–+
2
(2.8) Typ
.110
NC
NO
3
(9.7)
.382
LP0115CMKW01C
Snap-in • Double Pole
(1.2) x (2.0) Typ
.047 x .079
(0.5) Typ
.020
NC
6
L
–+
2
1
(2.8) Typ
.110
(13.6) Dia
.535
(20.0) Dia
.787
(2.5)
.098
(5.5)
.217
NO
NO
3
5
(9.7)
.382
4
COM
(6.0)
.236
(11.1)
.437
(7.3)
.287
(21.3)
.838
LP0125CMKW01A
LEGENDS
LM
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory
or utilize the general information and basic specifications presented below.
Suggested Printable Area for LP01 Cap
R
PW
Recommended Methods:
Pad Print or Laser Etch on cap.
Epoxy based ink is recommended.
(12.07) Dia
.475
(13.6) Dia
.535
(0.76) Typ
.030
Shaded area is printable area
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
Similar pages