MIC LPBS252 Press fit automotive rectifier Datasheet

PRESS FIT AUTOMOTIVE RECTIFIER
LPB251 THRU LPB256
LPBS251 THRU LPBS256
VOLTAGE RANGE
100 to 600 Volts
CURRENT
25.0 Amperes
LPB
LPBS
TECHNICAL SPECIFICATION:
Φ1.28±0.5
stannum
4.05± 0.2
10.30± 0.2
7.65± 0.5
Technology: Cell with Vacuum soldered
Case: Copper case
Polarity: As marked of case bottom
Lead: Plated lead , solderable per MIL-STD-202E
method 208C
Mounting: Press Fit
Weight: 0.17 ounces, 4.84 grams (LPB)
Weight: 0.14 ounces, 3.96 grams (LPBS)
9.00± 0.2
Φ10.18-10.23
Φ5.5-5.7
Φ5.5-5.7
Φ10.77-10.83
Φ8.2-8.8
Φ9.7-10.4
•
•
•
stannum
3.40± 0.2
MECHANICAL DATA
•
•
•
•
Φ1.28±0.5
34.75± 0.5
Low Leakage
Low forward voltage drop
High current capability
High forward surge current capacity
8.35± 0.5
•
•
•
•
35.45± 0.5
FEATURES
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60HZ, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
LPB251
LPB252
LPB254
LPB256
LPBS251
LPBS252
LPBS254
LPBS256
100
200
400
600
Volts
UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
Maximum RMS Voltage
VRMS
70
140
280
420
Volts
Maximum DC Blocking Voltage
VDC
100
200
400
600
Volts
Maximum Average Forward Rectified Current,
I(AV)
25
Amps
IFSM
400
Amps
Rating for fusing (t<8.3ms)
I2t
664
A2S
Maximum instantaneous Forward Voltage at 80A
VF
1.10
Volts
At Tc=105℃
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage
RθJC
1.0
℃/W
(-65 to +175)
℃
Polarity and voltage demotion color band (button)
Yellow
Silver
Notes:
1.
UA
250
TJ,TSTG
Typical Thermal Resistance
Operating and Storage Temperature Range
5.0
IR
TA=100℃
Enough heatsink must be considered in application.
E-mail: [email protected]
Web Site: www.cnmic.com
Orange
Green
PRESS FIT AUTOMOTIVE RECTIFIER
LPB251 THRU LPB256
LPBS251 THRU LPBS256
VOLTAGE RANGE
100 to 600 Volts
CURRENT
25.0 Amperes
LPB251 THRU LPB256
LPBS2505 THRU LPBS256
RATINGS AND CHARACTERISTIC CURVES
F1G.1 TYPICAL FORWARD CURRENT
DERATING GURVE
F1G.2 MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
PEAK FORWARD SURGE
CURRENT,(A)
AVERAGE FORWARD CURRENT,
(A)
400
30
25
30
20
Single Phase
10
Half Wave 60Hz
8.3ms Single Half Sine-Wave
300
(JEDEC Method) Tj=Tj max
200
100
Resistive or Inductive Load
1 Cycle
0.375″(9.5mm) Lead Length
1
0
0
25
50
75
100
125
150
2
175
4
6
8 10
20
40
60 80 100
NUMBER OF CYCLES AT 60 Hz
CASE TEMPERATURE, (℃)
F1G.3 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE POWER DISSIPATION
(W)
F1G.4 FORWARD ROWER DISSIPATION
INSTANTANEOUS FORWARD CURRENT,
(A)
1000
100
10
30
20
SQUARE WAVE
10
0
0
5
1.0
0.8
1.0
1.2
1.4
1.6
15
20
AVERAGE FORWARD CURRENT, (A)
T1=25℃
PULSE WIDTH=300μS
1%DUTY CYCLE
0.1
0.6
10
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,(V)
E-mail: [email protected]
Web Site: www.cnmic.com
25
Similar pages