Emerson Network Power LPT46 Universal input Datasheet

Embedded Power for
Business-Critical Continuity
Rev. 2.16.09_165
LPT40-M Series
of 3
LPT40-M Series
40 Watts
Total Power:
Input Voltage:
# of Outputs:
40 - 55 Watts
85 - 264 VAC
120 - 300VDC
Triple
Special Features
•
•
•
•
•
•
•
•
•
•
•
Universal input
3” x 5” footprint
Less than 1U high
Remote sense on main output
Built-in EMI filter
Low output ripple
Adjustable 5V output
Overvoltage protection
Overload protection
110 KHz switching frequency
LPX40 enclosure kit available
Electrical Specifications
Input
Input ra­nge:
Frequency:
Inrush current:
Input current:
Efficiency:
EMI:
Safety ground
leakage current:
5-264 VAC
8
120-300 VDC
47-440 Hz
< 18A peak @ 115 VAC;
< 36A peak @ 230 VAC, cold start @ 25 °C
1A max. (RMS) @ 115VAC
70% typical at full load (60% for LPT41)
FCC Class A conducted; CISPR 22 Class A conducted
EN55022 Class A conducted;
VDE 0878 PT3 Class A conducted
< 75 µA @ 50/60 Hz, 264 VAC input
Output
Safety
• VDE 0750/EN60601-1 (IEC601)
113769
• UL
UL2601 E182560
• CSA CSA 22.2 No.601.1
LR109492
• CE
Mark (LVD)
Maximum Power:
40W for convection; 55W with 30CFM forced air
Cross regulation:
Adjustment range:
Hold-up time:
Overload protection:
2% on output 1; ±5% on outputs 2, 3
±
-5, +10% minimum
20ms @ 40W load, 115 VAC nominal line
Short circuit protection on all outputs. Case overload protected
@ 110% to 145% above peak rating
5.7 to 6.7 VDC on the main output
LPT41: 3.6 to 4.6VDC
Compensates for 0.5 V lead drop min. Will operate without remote
sense connected. Reverse connection protected.
Overvoltage protection:
Remote sense:
Embedded Power for
Business-Critical Continuity
Rev. 2.16.09_165
LPT40-M Series
of 3
Environmental Specifications
Operating temperature:
0° to 50 °C ambient derate each output at 2.5% per degree from 50° to 70 °C, -20 °C start up.
Electromagnetic
susceptibility:
Humidity:
Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3
Vibration:
Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500
Hz, operational
Storage temperature:
-40° to 85 °C
Temperature coefficient:
±.04% per °C
MTBF demonstrated:
> 550,000 hours at full load and 25 °C ambient conditions
Operating; non-condensing 5% to 95%
Ordering Information
Output
Minimum Maximum Load with Maximum Load with
Peak
Ripple P/P
Regulation2
Voltage
Load
Convection cooling
30CFM Forced Air
Load1
(PARD)3
+5V
0.4A
4A
5A
7A
±2%
50mV
LPT42-M
+12V
0.2A
2A
2.5A
4A
±5%
120mV
-12V
0A
0.5A
0.7A
1A
±5%
120mV
+5V
0.4A
4A
5A
7A
±2%
50mV
LPT45-M
+15V
0.2A
2A
2.5A
3A
±5%
150mV
-15V
0A
0.5A
0.7A
1A
±5%
150mV
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. Minimum Loads are required.
Model Number
Power Derating Curve
55W
30 CFM Forced Air Cooling
40W
30W
Output
Power
(Watts) 20W
Natural
Convection
Cooling
27.5W
20W
10W
0W
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
TA – Ambient Temperature – °C
Embedded Power for
Business-Critical Continuity
­Americas
Mechanical Drawing
0.22"
(5.6)
4.55"
(115.6)
SK201
3.00"
(76.2)
2.55"
(64.8)
3
SK 1
1
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
5.00"
(127)
M1 GND
M2
_ +
1
2
3
4
5
6
N
Rev. 2.16.09_165
LPT40-M Series
of 3
Remote Sense
Connector
Voltage
Adj. Pot
SK 2
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
L
0.15" (4)
DIA (4 places)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.PowerConversion.com
1.14"
(29)
techsupport.embeddedpower
@emerson.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
0.12"
(3)
Mating­ Connectors
Pin Assignments
Connector
SK1-1
SK1-3
SK2-1
SK2- 2
SK2- 3
SK2-4
LPT42-M
Line
Neutral
+12V
+5V
+5V
Common
LPT45-M
Line
Neutral
+15V
+5V
+5V
Common
SK2-5
Common Common
SK2-6
SK201-1
SK201-2
-12V
+Sense
-Sense
-15V
+Sense
-Sense
AC Input: Molex 09-50-8031 (USA)
09-91-0300 (UK)
PINS: 08-58-0111
DC
Molex 09-50-8061 (USA)
Outputs: 09-91-0600 (UK)
PINS: 08-58-0111
Remote Molex 22-01-2025
Sense:
PINS: 08-52-0114
Emerson Network Power Connector Kit #70-841-006,
includes all of the above
1. Specifications subject to change without notice.
­2. All dimensions in inches (mm), tolerance is ±0.02”­­ (±0.5mm)
3. Mounting holes M1 and M2 should be grounded for
EMI purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated.
6. Warranty: 2 year
7. Weight: 0.5lbs/0.23kg
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co. ©2008 Emerson Electric Co.
Similar pages