Murata LQM2HPN1R5MG0 Chip inductor (chip coil) power inductor (multilayer type) lqm2hp g0 series (1008 size) Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type)
Data Sheet
Chip Inductor (Chip Coil)
1
Power Inductor (Multilayer Type)
LQM2HP_G0 Series (1008 Size)
■ Packaging
0.9±0.1
■ Dimensions
0.6±0.2
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
3000
B
Bulk(Bag)
1000
2.0±0.2
2.5±0.2
(in mm)
■ Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
DC Resistance
Self Resonance Frequency (min.)
LQM2HPNR47MG0p
0.47µH±20%
1800mA
0.04ohm±25%
100MHz
LQM2HPN1R0MG0p
1.0µH±20%
1600mA
0.055ohm±25%
60MHz
LQM2HPN1R5MG0p
1.5µH±20%
1500mA
0.07ohm±25%
50MHz
LQM2HPN2R2MG0p
2.2µH±20%
1300mA
0.08ohm±25%
40MHz
LQM2HPN3R3MG0p
3.3µH±20%
1200mA
0.10ohm±25%
30MHz
4.7µH±20%
1100mA
0.11ohm±25%
25MHz
LQM2HPN4R7MG0p
Test Frequency: 1MHz
Class of Magnetic Shield: Magnetic shield of ferrite
■ Inductance-Frequency Characteristics (Typ.)
10
Operating Temperature Range: -55°C to +125°C
■ Inductance-Current Characteristics (Typ.)
10
4.7µH
3.3µH
4.7µH
2.2µH
3.3µH
2.2µH
Inductance (µH)
Inductance (µH)
1.5µH
1.0µH
1
0.47µH
1.5µH
1
1.0µH
0.47µH
0.1
0.1
0.1
1
10
100
Frequency (MHz)
1
10
100
Current (mA)
1000
10000
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type)
Data Sheet
2
Continued from the preceding page.
■ Temperature Rise Characteristics (Typ.)
40
3.3µH
4.7µH
Temperature Rise (°C)
30
2.2µH
1.5µH
1.0µH
20
0.47µH
10
0
0
500
1000
Current (mA)
1500
2000
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Similar pages