STATEK LQXO-4 Low power crystal oscillator Datasheet

LQXO-4 OSCILLATOR
32 kHz to 200 kHz*
Low Power Crystal Oscillator
ā„¢
DESCRIPTION
The LQXO-4 oscillator design consists of a CMOScompatible hybrid circuit, packaged in a standard TO-39
metal package. Permanent, precision tuning of the
oscillator allows for very tight calibration tolerance and
eliminates the need for a trimming capacitor, a major
source of long-term frequency drift. The specifications and
characteristics of the LQXO-4 vary with frequency. The
characteristics of the 32.768 kHz model are presented in
this data sheet.
*Consult factory for other
frequencies.
PACKAGE DIMENSIONS
FEATURES
A
E
Very low power consumption
Low aging
CMOS compatible
TOP VIEW
B
Double hermetically sealed package
Full military testing available
C
3 Volt operation available
D
APPLICATIONS
Industrial, Computer & Communications
G
General purpose clock oscillator
F
Tone generators
3
1
Data loggers
Telephone equipment
2
BOTTOM VIEW
Ultrasonic detectors
Airborne hybrid computer
Flight recorder
DIM
INCHES
mm
A
0. 380 MAX.
9.65 MAX.
PIN CONNECTIONS
B
0. 185 MAX.
4.70 MAX.
VDD
2. Output
3. Ground
C
0. 500 Min.
D
0. 029
0.74
E
0. 326 MAX.
8.28 MAX
F
0. 200 Ref.
5.08 Ref.
1.
G
O
45
12.70 Min.
45O
Note:
1. All metal parts gold plated
2. Leads are 0.019 in.[0.48mm] MAX.
10141 - Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS-LQXO-4 32.768 kHz
ABSOLUTE MAXIMUM RATINGS
Specifications are typical at 25oC unless otherwise noted.
Specifications are subject to change without notice.
Supply Voltage VDD
-0.3V to 7.0V
Storage Temperature
-55OC to +125OC
Maximum Process Temp. 260OC, 10 seconds
Supply Voltage (VDD)
5V +_ 10% (3.3V available)
Calibration
Tolerance*
A:
+
_
0.01% (100ppm)
ELECTRICAL CHARACTERISTICS
B:
+
_
0.03%
LQXO-4 32.768 kHz
C:
+
_
0.1%
O
O
Frequency Stability** 0 C to +50 C -0.0025%
All parameters are measured at ambient temperature
with a 10MV and 10pF load at 5V.
+
_
Typ. 25 ppm
-0.004% MAX. +_ 40 ppm
Voltage Coefficient
Aging, first year
SYMBOL PARAMETER
TYP. MAX. UNIT
4.8
4.95
V
0.05 0.2
V
V
Output Voltage Hi
-0.01% MAX +_ 100 ppm
V
Output Voltage Lo
1 ppm/V Typ.
*tr
Rise Time (10%-90%)
12
25
nsec.
3 ppm/V MAX.
*tf
Fall Time (10%-90%)
12
25
nsec.
50
60
%
mA
mA
SYM
1 ppm/year Typ.
1,000g, 1 msec.,1/2 sine 3 ppm MAX.
Vibration
10g rms10-2000 Hz 3 ppm MAX.
Frequency change vs.
10% Output Load Change 1 ppm MAX.
Duty Cycle
40
Supply Current
IDD
3 ppm/year MAX.
Shock
MIN.
Typ. +_ 70 ppm
-20OC to +70OC -0.007%
V
=5V
7
15
V
=3V
5
10
* Models with faster rise and fall time available, consult factory.
Operating Temperature -10OC to +70OC Commercial
-40OC to +85OC Industrial
-55OC to +125OC Military
PACKAGING
LQXO-4 - Tray Pack (Standard)
* Tighter tolerances available.
** Does not include calibration tolerance. Positive variations small compared to negative
variations.
OUTPUT WAVE FORM
VDD
VOH
TYPICAL CURRENT CONSUMPTION
90%*
CURRENT (uA)
LQXO-4-32.768 kHz
12
VOL
0
10
10%*
* Of VDD
8
tr
tf
6
4
2
3
4
5
6
7
V (Volts)
DD
HOW TO ORDER LQXO-4 CRYSTAL OSCILLATORS
LQXO-4
S
ā€œSā€ if special or
custom design.
Blank if Std.
32.768 kHz
Frequency
(
A
*Calibration
Tolerance
@25OC
(A)
(B)
(C)
/
I
)
Temp. Range:
C = Commercial
I = Industrial
M = Military
S = Specify
*Other calibration fill in ppm
10141 - Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
Similar pages