LIGITEK LSD4015-62V-XX Single digit led display (4.0 inch) Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SINGLE DIGIT LED DISPLAY (4.0 Inch)
LSD4015/62V-XX
DATA SHEET
DOC. NO
:
QW0905- LSD4015/62V-XX
REV.
:
A
DATE
:
16 - Feb.- 2006
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/7
PART NO. LSD4015/62V-XX
Package Dimensions
15.0
(0.591")
90.0(3.543")
122.0
(4.803")
101.6
(4.0")
107.0
(4.213")
ψ11.0(0.433")
LSD4015/62V-XX
LIGITEK
7.3±0.5
Ø 0.8
TYP
PIN NO.1
5.08X4=20.32
(0.8")
Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25(0.01") unless otherwise noted.
2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSD4015/62V-XX
Page 2/7
Internal Circuit Diagram
LSD40152V-XX
1,8
A
7
B
6
C
4
D
3
E
2
F
G
DP
9 10 5
LSD40162V-XX
1,8
A
7
B
6
C
4
D
3
E
2
F
G
DP
9 10 5
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/7
PART NO. LSD4015/62V-XX
Electrical Connection
PIN NO.
LSD40152V-XX
PIN NO.
LSD40162V-XX
1
Common Cathode
1
Common Anode
2
Anode E
2
Cathode E
3
Anode D
3
Cathode D
4
Anode C
4
Cathode C
5
Anode DP
5
Cathode DP
6
Anode B
6
Cathode B
7
Anode A
7
Cathode A
8
Common Cathode
8
Common Anode
9
Anode F
9
Cathode F
10
Anode G
10
Cathode G
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO.LSD4015/62V-XX
Page 4/7
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Symbol
Parameter
UNIT
VG
Forward Current Per Chip
IF
30
mA
Peak Forward Current Per
Chip (Duty 1/10,0.1ms
Pulse Width)
IFP
120
mA
Power Dissipation Per Chip
PD
100
mW
Ir
10
μA
Operating Temperature
Topr
-25 ~ +85
℃
Storage Temperature
Tstg
-25 ~ +85
℃
Reverse Current Per Any Chip
Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 ℃
Part Selection And Application Information(Ratings at 25℃)
common
cathode
Material Emitted or anode
CHIP
PART NO
△λ
(nm)
(nm)
Vf(v)
Iv(mcd)
IV-M
Min. Typ. Max. Min. Typ.
Common
Cathode
LSD40152V-XX
GaP
LSD40162V-XX
Electrical
λP
565
Green
30
6.8
8.4
Common
Anode
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
10.4 18.0 31.0
2:1
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO.LSD4015/62V-XX
Page 5/7
Test Condition For Each Parameter
Symbol
Unit
Test Condition
Forward Voltage Per Chip
Vf
volt
If=20mA
Luminous Intensity Per Chip
Iv
mcd
If=20mA
Peak Wavelength
λp
nm
If=20mA
△λ
nm
If=20mA
Ir
μA
Vr=5V
Parameter
Spectral Line Half-Width
Reverse Current Any Chip
Luminous Intensity Matching Ratio
IV-M
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/7
PART NO.LSD4015/62V-XX
Typical Electro-Optical Characteristics Cur ve
VG CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.5
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.1
1.0
2.0
3.0
4.0
1.0
5.0
10
1.2
1.1
1.0
0.9
0.8
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
500
550
600
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Relative Intensity@20mA
Fig.4 Relative Intensity vs. Temperature
Relative Intensity@20mA
Normalize @25℃
Forward Voltage@20mA
Normalize @25℃
Fig.3 Forward Voltage vs. Temperature
-20
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
650
80
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LMD5741/2BVG-XX
Page 7/7
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=10mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hours.
1.Ta=105 ℃±5℃ &-40 ℃±5 ℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Similar pages