LIGITEK LSD505-64V-XX Single digit led display (0.50 inch) Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SINGLE DIGIT LED DISPLAY (0.50 Inch)
LSD505/64V-XX
DATA SHEET
DOC. NO
:
QW0905- LSD505/64V-XX
REV.
:
A
DATE
: 25 - Jan - 2005
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/7
PART NO. LSD505/64V-XX
Package Dimensions
12.7
(0.50")
12.7
(0.50")
8.0
(0.315")
19.0
(0.748")
15.24
(0.60")
ψ1.5(0.059")
LSD505/64V-XX
LIGITEK
0.51
TYP
4.9±0.5
2.45X4=9.8
(0.386")
PIN NO.1
Note : 1.All dimension are in millimeters and (lnch) tolerance is ± 0.25(0.01") unless otherwise noted.
2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSD505/64V-XX
Page 2/7
Internal Circuit Diagram
LSD5054V-XX
3,8
A
7
B C D E
6
4
2
1
F
G DP
9 10 5
LSD5064V-XX
3,8
A
7
B C D E
6
4
2
1
F
G DP
9 10 5
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/7
PART NO. LSD505/64V-XX
Electrical Connection
PIN NO.
LSD5054V-XX
PIN NO.
LSD5064V-XX
1
Anode E
1
Cathode E
2
Anode D
2
Cathode D
3
Common Cathode
3
Common Anode
4
Anode C
4
Cathode C
5
Anode DP
5
Cathode DP
6
Anode B
6
Cathode B
7
Anode A
7
Cathode A
8
Common Cathode
8
Common Anode
9
Anode F
9
Cathode F
10
Anode G
10
Cathode G
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/7
PART NO. LSD505/64V-XX
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Symbol
Parameter
UNIT
VR
Forward Current Per Chip
IF
30
mA
Peak Forward Current Per
Chip (Duty 1/10,0.1ms
Pulse Width)
IFP
100
mA
Power Dissipation Per Chip
PD
100
mW
Ir
10
μA
Operating Temperature
Topr
-25 ~ +85
℃
Storage Temperature
Tstg
-25 ~ +85
℃
Reverse Current Per Any Chip
Solder Temperature 1-16 Inch Below Seating Plane For 3 Seconds At 260 ℃
Part Selection And Application Information(Ratings at 25℃)
CHIP
PART NO
Material
common
cathode
Emitted or anode
△λ
(nm)
(nm)
Vf(v)
Iv(mcd)
Min.
Typ. Max. Min.
Typ.
1.5
1.7
2.35
4.0
IV-M
Common
Cathode
LSD5054V-XX
GaAlAs
LSD5064V-XX
Electrical
λP
660
Red
20
Common
Anode
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
2.4
2:1
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/7
PART NO. LSD505/64V-XX
Test Condition For Each Parameter
Symbol
Unit
Test Condition
Forward Voltage Per Chip
Vf
volt
If=20mA
Luminous Intensity Per Chip
Iv
mcd
If=10mA
Peak Wavelength
λP
nm
If=20mA
△λ
nm
If=20mA
Ir
μA
Vr=5V
Parameter
Spectral Line Half-Width
Reverse Current Any Chip
Luminous Intensity Matching Ratio
IV-M
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSD505/64V-XX
Page6/7
Typical Electro-Optical Characteristics Curve
VR CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1
01
2.5
2.0
1.5
1.0
0.5
0.0
1.0
2.0
3.0
4.0
1
5.0
10
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
Relative Intensity@20mA
Normalize @25 ℃
Forward Voltage@20mA
Normalize @25 ℃
1.2
1.1
1.0
0.9
0.8
-20
0
20
40
60
80
100
Relative Intensity@20mA
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
600
650
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature(℃)
550
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
700
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/7
PART NO. LSD505/64V-XX
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=10mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resisance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under ondition
of hogh temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5 ℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5 ℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hous.
1.Ta=105 ℃±5℃&-40 ℃±5℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5 ℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5 ℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Similar pages