TI LT1004CD-2-5G4 Micropower integrated voltage reference Datasheet

 SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
D Initial Accuracy
D
D
D
D
− ±4 mV for LT1004-1.2
− ±20 mV for LT1004-2.5
Micropower Operation
Operates up to 20 mA
Very Low Reference Impedance
Applications:
− Portable Meter Reference
− Portable Test Instruments
− Battery-Operated Systems
− Current-Loop Instrumentation
D OR PW PACKAGE
(TOP VIEW)
NC
NC
NC
ANODE
1
8
2
7
3
6
4
5
CATHODE
NC
CATHODE
NC
NC − No internal connection
Terminals 6 and 8 are internally connected.
LP PACKAGE
(TOP VIEW)
description/ordering information
ANODE
The LT1004 micropower voltage reference is a
two-terminal band-gap reference diode designed
to provide high accuracy and excellent
temperature characteristics at very low operating
currents. Optimizing the key parameters in the
design, processing, and testing of the device
results in specifications previously attainable only
with selected units.
CATHODE
NC
NC − No internal connection
The LT1004 is a pin-for-pin replacement for the LM285 and LM385 series of references, with improved
specifications. It is an excellent device for use in systems in which accuracy previously was attained at the
expense of power consumption and trimming.
The LT1004C is characterized for operation from 0°C to 70°C. The LT1004I is characterized for operation from
−40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2006, Texas Instruments Incorporated
!"# $ %&'# "$ (&)*%"# +"#'
+&%#$ %! # $('%%"#$ (' #,' #'!$ '-"$ $#&!'#$
$#"+"+ .""#/ +&%# (%'$$0 +'$ # '%'$$"*/ %*&+'
#'$#0 "** (""!'#'$
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
description/ordering information (continued)
ORDERING INFORMATION
TA
VZ
TYP
SOIC (D)
1.2 V
TO-226 / TO-92 (LP)
TSSOP (PW)
0°C to 70°C
SOIC (D)
2.5 V
TO-226 / TO-92 (LP)
TSSOP (PW)
SOIC (D)
1.2 V
ORDERABLE
PART NUMBER
PACKAGE†
TO-226 / TO-92 (LP)
−40°C to 85°C
TSSOP (PW)
SOIC (D)
2.5 V
TSSOP (PW)
Tube of 75
LT1004CD-1-2
Reel of 2500
LT1004CDR-1-2
Ammo of 2000,
formed lead
LT1004CLPM-1-2
Reel of 2000,
formed lead
LT1004CLPR-1-2
Bulk of 1000,
straight lead
LT1004CLP-1-2
Tube of 150
LT1004CPW-1-2
Reel of 2000
LT1004CPWR-1-2
Tube of 75
LT1004CD-2-5
Reel of 2500
LT1004CDR-2-5
Ammo of 2000,
formed lead
LT1004CLPM-2-5
Reel of 2000,
formed lead
LT1004CLPR-2-5
Bulk of 1000,
straight lead
LT1004CLP-2-5
Tube of 150
LT1004CPW-2-5
Reel of 2000
LT1004CPWR-2-5
Tube of 75
LT1004ID-1-2
Reel of 2500
LT1004IDR-1-2
Ammo of 2000,
formed lead
LT1004ILPM-1-2
Reel of 2000,
formed lead
LT1004ILPR-1-2
Bulk of 1000,
straight lead
LT1004ILP-1-2
Tube of 150
LT1004IPW-1-2
Reel of 2000
LT1004IPWR-1-2
Tube of 75
LT1004ID-2-5
Reel of 2500
LT1004IDR-2-5
Tube of 150
LT1004IPW-2-5
Reel of 2000
LT1004IPWR-2-5
TOP-SIDE
MARKING
4C-12
1004C12
4C-12
4C-25
1004C25
4C-25
4I-12
1004I12
4I-12
4I-25
4I-25
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
symbol
ANODE
(A)
2
POST OFFICE BOX 655303
CATHODE
(K)
• DALLAS, TEXAS 75265
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
schematic
LT1004-1.2
CATHODE
Q12
7.5 kΩ
Q3
200 kΩ
Q11
Q4
Q2
Q10
Q1
20 pF
20 pF
50 kΩ
Q9
600 kΩ
300 kΩ
500 kΩ
Q5
Q8
500 Ω Q6
Q13
Q7
60 kΩ
ANODE
LT1004-2.5
CATHODE
Q12
7.5 kΩ
200 kΩ
Q11
Q3
Q4
Q2
500 kΩ
Q10
Q1
20 pF
20 pF
50 kΩ
600 kΩ
Q9
300 kΩ
500 kΩ
Q5
Q8
500 Ω
Q6
Q7
Q13
500 kΩ
60 kΩ
ANODE
NOTE A: All component values shown are nominal.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Package thermal impedance, θJA (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
TA
LT1004C
Operating free-air temperature
LT1004I
MIN
MAX
0
70
−40
85
UNIT
°C
electrical characteristics at specified free-air temperature
PARAMETER
VZ
aV
Reference voltage
Z
Average
temperature coefficient
of reference voltage§
TEST
CONDITIONS
IZ = 100 µA
Full
range
LT1004-1.2
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.231
1.235
1.239
2.48
2.5
2.52
LT1004C
1.225
1.245
2.47
2.53
LT1004I
1.225
1.245
2.47
2.53
IZ = 10 µA
∆VZ
UNIT
V
20
25°C
IZ = 20 µA
ppm/°C
20
25°C
Change in
reference voltage
with current
LT1004-2.5
TA‡
IZ = IZ(min) to 1 mA
IZ = 1 mA to 20 mA
∆VZ/∆t
Long-term change
in reference voltage
IZ(min)
Minimum
reference current
zz
Reference impedance
IZ = 100 µA
A
Vn
Broadband
noise voltage
IZ = 100 µA,
f = 10 Hz to 10 kHz
IZ = 100 µA
1
1
Full range
1.5
1.5
25°C
10
10
Full range
20
20
25°C
20
Full range
8
10
12
20
0.2
0.6
0.2
0.6
25°C
Full range
25°C
20
1.5
60
ppm/khr
1.5
120
mV
µA
Ω
µV
‡ Full range is 0°C to 70°C for the LT1004C and −40°C to 85°C for the LT1004I.
§ The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature
range.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
TYPICAL CHARACTERISTICS
Table of Graphs
GRAPH TITLE
FIGURE
LT1004x-1.2
Reverse current vs Reverse voltage
1
Reference-voltage change vs Reverse current
2
Forward voltage vs Forward current
3
Reference voltage vs Free-air temperature
4
Reference impedance vs Reference current
5
Noise voltage vs Frequency
6
Filtered output noise voltage vs Cutoff frequency
7
LT1004x-2.5
Transient response
8
Reverse current vs Reverse voltage
9
Forward voltage vs Forward current
10
Reference voltage vs Free-air temperature
11
Reference impedance vs Reference current
12
Noise voltage vs Frequency
13
Filtered output noise voltage vs Cutoff frequency
14
Transient response
15
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
TYPICAL CHARACTERISTICS†
LT1004x-1.2
LT1004x-1.2
REVERSE CURRENT
vs
REVERSE VOLTAGE
REFERENCE-VOLTAGE CHANGE
vs
REVERSE CURRENT
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
16
100
∆V Z − Reference Voltage Change − mV
I R − Reverse Current − µ A
10
1
0.2
0.4
0.6
0.8
1
1.2
12
8
4
0
−4
0.01
0.1
0
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
TA = −55°C to 125°C
TA = −55°C to 125°C
1.4
0.1
10
100
IR − Reverse Current − mA
VR − Reverse Voltage − V
Figure 1
Figure 2
LT1004x-1.2
LT1004x-1.2
FORWARD VOLTAGE
vs
FORWARD CURRENT
REFERENCE VOLTAGE
vs
FREE-AIR TEMPERATURE
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
1.245
1.2
IZ = 100 µA
TA = 25°C
V Z − Reference Voltage − V
1
V F − Forward Voltage − V
1
0.8
0.6
0.4
1.24
1.235
1.23
0.2
1.225
0
0.01
0.1
1
10
100
−55 −35 −15
5
25
45
65
85
105 125
TA − Free-Air Temperature − °C
IF − Forward Current − mA
Figure 3
Figure 4
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
TYPICAL CHARACTERISTICS†
LT1004x-1.2
LT1004x-1.2
REFERENCE IMPEDANCE
vs
REFERENCE CURRENT
NOISE VOLTAGE
vs
FREQUENCY
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
100
700
600
Vn − Noise Voltage − nV/ Hz
z z − Reference Impedance − Ω
f = 25 Hz
TA = −55°C to 125°C
10
1
ÎÎÎÎ
ÎÎÎÎ
IZ = 100 µA
TA = 25°C
500
400
300
200
100
0.1
0.01
0.1
1
10
0
10
100
100
1k
10 k
100 k
f − Frequency − Hz
IZ − Reference Current − mA
Figure 6
Figure 5
TL1004x-1.2
FILTERED OUTPUT NOISE VOLTAGE
vs
CUTOFF FREQUENCY
60
50
ÎÎÎÎÎ
ÎÎÎÎÎ
40
IZ = 100 µA
TA = 25°C
ÎÎÎÎÎ
ÎÎÎÎÎ
100 µA
R
C
30
20
10
0
0.1
2
RC Low Pass
Input and Output Voltages − V
Filtered Output Noise Voltage − µV
70
LT1004x-1.2
TRANSIENT RESPONSE
ÎÎÎÎ
1.5
Output
1
36 kΩ
VI
0.5
0
ÎÎÎ
5
Input
0
1
10
VO
100
0
100
500
600
t − Time − µs
Cutoff Frequency − kHz
Figure 7
Figure 8
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
TYPICAL CHARACTERISTICS†
100
LT1004x-2.5
LT1004x-2.5
REVERSE CURRENT
vs
REVERSE VOLTAGE
FORWARD VOLTAGE
vs
FORWARD CURRENT
1.2
ÎÎÎÎÎÎ
1
V F − Forward Voltage − V
I R − Reverse Current − µ A
ÎÎÎÎ
ÎÎÎÎ
TA = 25°C
TA = −55°C to 125°C
10
1
0.8
0.6
0.4
0.2
0
0.1
0
0.5
1
1.5
2
2.5
0.1
0.01
3
VR − Reverse Voltage − V
1
10
IF − Forward Current − mA
Figure 10
Figure 9
LT1004x-2.5
REFERENCE VOLTAGE
vs
FREE-AIR TEMPERATURE
2.52
ÎÎÎÎÎ
ÎÎÎÎÎ
IZ = 100 µA
V Z − Reference Voltage − V
2.515
2.51
2.505
2.5
2.495
2.49
2.485
2.48
2.475
−55 −35 −15
5
25
45
65
85
105 125
TA − Free-Air Temperature − °C
Figure 11
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
TYPICAL CHARACTERISTICS†
1000
LT1004x-2.5
LT1004x-2.5
REFERENCE IMPEDANCE
vs
REFERENCE CURRENT
NOISE VOLTAGE
vs
FREQUENCY
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
1400
100
1200
Vn − Noise Voltage − nV/ Hz
z z − Reference Impedance − Ω
f = 25 Hz
TA = −55°C to 125°C
10
1
ÎÎÎÎ
ÎÎÎÎ
IZ = 100 µA
TA = 25°C
1000
800
600
400
200
0.1
0.01
0.1
1
10
0
10
100
100
1k
10 k
100 k
f − Frequency − Hz
IZ − Reference Current − mA
Figure 13
Figure 12
TL1004x-2.5
FILTERED OUTPUT NOISE VOLTAGE
vs
CUTOFF FREQUENCY
ÎÎÎÎ
ÎÎÎÎ
IZ = 100 µA
TA = 25°C
100
4
ÎÎÎÎÎ
ÎÎÎÎÎ
Input and Output Voltages − V
Filtered Output Noise Voltage −µV
120
LT1004x-2.5
TRANSIENT RESPONSE
RC Low Pass
80
100 µA
R
60
C
40
20
3
Output
2
24 kΩ
VI
1
VO
0
5
Input
0
0
0.1
1
10
100
0
100
500
t − Time − µs
Cutoff Frequency − kHz
Figure 14
Figure 15
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
APPLICATION INFORMATION
100 pF
24 V
24 V
600 µs RC
+
22 kΩ
Output
LM301A
12 kΩ
21 V
−
16.9 kن
LT1004-1.2
−5 V
0.05 µF
1.05 kن
10 kΩ
2N3904
TTL Input
56 kΩ
−5 V
† 1% metal-film resistors
Figure 16. VI(PP) Generator for EPROMs (No Trim Required)
Network Detail
YSI 44201
RT Network
YSI 44201
15 V
6250 Ω
Red
2.7 kΩ
5%
10 kΩ
0.1%
LT1004-1.2
−
1/2
TLE2022
2765 Ω
0.1%
302 kΩ
+
1/2
TLE2022
+
−
10 kΩ
0.1%
168.3 Ω
0.1%
10 kΩ
0.1%
Figure 17. 0°C-to-100°C Linear-Output Thermometer
10
Brown
Green
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
0−10 V
0°C−100°C
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
APPLICATION INFORMATION
VI = 6.5 V to 15 V
V+
R
LM334
V−
5.6 kΩ
3
7
8
+
TLC271
2
6
VO = 5 V
−
4
LT1004-1.2
3.01 MΩ
1%
150 pF
1 MΩ
1%
Figure 18. Micropower 5-V Reference
VI ≥ 5 V
9V
100 µA
22 Ω
510 kΩ
Output
+
1.235 V
50 µF
LT1004-1.2
LT1004-1.2
Figure 19. Low-Noise Reference
Figure 20. Micropower Reference From 9-V Battery
†
100 kΩ
R1
1684 Ω
3V
Lithium
5 kΩ at 25°C‡
THERMOCOUPLE
TYPE
R1
+
J
K
T
S
232 kΩ
298 kΩ
301 kΩ
2.1 MΩ
LT1004-1.2
187 Ω
1800 Ω
+
−
−
† Quiescent current ≅ 15 µA
‡ Yellow Springs Inst. Co., Part #44007
NOTE A: This application compensates within ±1°C from 0°C to 60°C.
Figure 21. Micropower Cold-Junction Compensation for Thermocouples
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
APPLICATION INFORMATION
LT1084
VI ≥ 8 V
IN
5V
OUT
5V
+
ADJ
10 µF
50 kΩ
10 µF
+
301 Ω
1%
LT1004-2.5
2.5 V
100 Ω
1%
LT1004-2.5
Figure 22. 2.5-V Reference
Figure 23. High-Stability 5-V Regulator
VCC+ ≥ 5 V
250 kΩ
15 V
250 kΩ
2 kن
Output
LT1004-1.2
Input
R1
(see Note A)
−
TLE2027
2N3904
+
IO (see Note A)
200 kΩ
−5 V
LT1004-1.2
60 kΩ
† May be increased for small output currents
VCC− ≤ −5 V
2V
1.235 V
NOTE A: R1 ≈
,I =
IO + 10 µA O
R1
Figure 24. Ground-Referenced Current Source
Figure 25. Amplifier With Constant Gain
Over Temperature
V+
LM334
1.5 V (see Note A)
R
6.8 kΩ
3 kΩ
R ≤ 5 kΩ
1.235 V
LT1004-1.2
LT1004-1.2
IO ≈
NOTE A: Output regulates down to 1.285 V for IO = 0.
Figure 26. 1.2-V Reference From 1.5-V Battery
12
POST OFFICE BOX 655303
1.3 V
R
Figure 27. Terminal Current Source
With Low Temperature Coefficient
• DALLAS, TEXAS 75265
SLVS022L − JANUARY 1989 − REVISED OCTOBER 2006
APPLICATION INFORMATION
Battery Output
R1†
1%
1 MΩ
12 V
+
TLC271
−
LO = Battery Low
133 kΩ
1%
LT1004-1.2
† R1 sets trip point, 60.4 kΩ per cell for 1.8 V per cell.
Figure 28. Lead-Acid Low-Battery-Voltage Detector
LT1084
VI
VI
10 µF
VO
+
ADJ
VO
120 Ω
+
10 µF
LT1004-1.2
R1 ≤
VCC − 1 V
0.015
R1
2 kΩ
VCC−
Figure 29. Variable-Voltage Supply
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LT1004CD-1-2
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CD-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CD-2-5G4
ACTIVE
SOIC
D
8
TBD
Call TI
LT1004CDE4-1-2
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDE4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDG4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDR-1-2
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDR-2-5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDRE4-1-2
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CDRE4-2-5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CLP-1-2
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
LT1004CLP-2-5
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
LT1004CPW-1-2
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPW-2-5
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWE4-1-2
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWE4-2-5
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWR-1-2
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWR-2-5
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWRE4-1-2
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004CPWRE4-2-5
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004ID-1-2
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004ID-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IDE4-1-2
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IDE4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IDR-1-2
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IDR-2-5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
Lead/Ball Finish
MSL Peak Temp (3)
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LT1004IDRE4-1-2
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IDRE4-2-5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
LT1004ILP-2-5
OBSOLETE
TO-92
LP
3
TBD
Call TI
LT1004IPW-1-2
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Call TI
Level-1-260C-UNLIM
LT1004IPW-2-5
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWE4-1-2
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWE4-2-5
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWR-1-2
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWR-2-5
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWRE4-1-2
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004IPWRE4-2-5
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LT1004MD-1-2
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
LT1004MD-2-5
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
LT1004MDR-1-2
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
LT1004MDR-2-5
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
LT1004MLP-1-2
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
LT1004MLP-2-5
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 3
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.205 (5,21)
0.175 (4,44)
0.165 (4,19)
0.125 (3,17)
DIA
0.210 (5,34)
0.170 (4,32)
Seating
Plane
0.157 (4,00) MAX
0.050 (1,27)
C
0.500 (12,70) MIN
0.104 (2,65)
FORMED LEAD OPTION
0.022 (0,56)
0.016 (0,41)
0.016 (0,41)
0.014 (0,35)
STRAIGHT LEAD OPTION
D
0.135 (3,43) MIN
0.105 (2,67)
0.095 (2,41)
0.055 (1,40)
0.045 (1,14)
1
2
3
0.105 (2,67)
0.080 (2,03)
0.105 (2,67)
0.080 (2,03)
4040001-2 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70)
0.460 (11,70)
1.260 (32,00)
0.905 (23,00)
0.650 (16,50)
0.610 (15,50)
0.020 (0,50) MIN
0.098 (2,50)
0.384 (9,75)
0.335 (8,50)
0.748 (19,00)
0.217 (5,50)
0.433 (11,00)
0.335 (8,50)
0.748 (19,00)
0.689 (17,50)
0.114 (2,90)
0.094 (2,40)
0.114 (2,90)
0.094 (2,40)
0.169 (4,30)
0.146 (3,70)
DIA
0.266 (6,75)
0.234 (5,95)
0.512 (13,00)
0.488 (12,40)
TAPE & REEL
4040001-3 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated
Similar pages