LINER LT1464ACN8 Dual/quad micropower, 1mhz c-load picoampere bias current jfet input op amp Datasheet

LT1464/LT1465
Dual/Quad Micropower,
1MHz C-Load Picoampere
Bias Current JFET Input Op Amps
U
FEATURES
■
■
■
■
■
■
■
■
■
■
DESCRIPTION
The LT ®1464 (dual) and LT1465 (quad) are the first
micropower op amps (200µA max per amp) to offer
picoampere input bias currents (500fA typ) and unity-gain
stability for capacitive loads up to 10nF. The output can
swing a 10k load to within 1.5V of either supply, just like
op amps that require an order of magnitude more supply
current. This unique combination of performance makes
the LT1464/LT1465 ideal over a wide range of input and
output impedances.
Input Bias Current:
2pA Max (LT1464A)
20pA Max (LT1464, LT1465)
Supply Current per Amplifier: 200µA Max
Gain Bandwidth Product: 1MHz Typ
Slew Rate: 0.9V/µs Typ
Input Common Mode Range Includes Positive Rail
Unity-Gain Stable for C-LoadTM Up to 10nF
Open-Loop Gain: 1 Million Typ
Guaranteed Specs with ±5V, ±15V Supplies
Guaranteed Matching Specifications
Standard Pinout: SO-8, SO-14 Package
In the design and testing of the LT1464/LT1465, particular
emphasis has been placed on optimizing performance in
the low cost SO-8 (dual) and 14-lead SO (quad) package for
±15V and ±5V supplies. The input common mode range
includes the positive rail. Slew rate (0.5V/µs min) and gain
bandwidth product (650kHz min) are 100% tested. A full
set of matching specifications is also provided.
U
APPLICATIONS
■
■
■
■
Battery-Powered Systems
Photocurrent Amplifiers
Low Frequency, Micropower Active Filters
Low Droop Track-and-Hold Circuits
, LTC and LT are registered trademarks of Linear Technology Corporation.
C-Load is a trademark of Linear Technology Corporation.
U
TYPICAL APPLICATION
Micropower Low Droop Track-and-Hold/Peak Detector
V+
A
1/4 LTC201 13
15
4
14
1 MCT2
5
V+
V–
5
2
+
1/2 LT1464
6
IN
1/4 LTC201
B
7
6
4
–
8
1/2 LT1464
–
1 MCT2
5
3
+
2
6
4
3
MODE
Track
Reset
Reset
IN A IN B
0
0
0
0
0
0
1
VOUT
4
V–
2
FUNCTION
Track-and-Hold
Positive Peak Detector
Negative Peak Detector
2
R1*
1
5
Small-Signal Response, CLOAD = 10nF
C1
10nF
POLYSTYRENE
16
LT1464 • TA01
0.5pA
= 0.05mV/s
10nF
TOTAL SUPPLY CURRENT = 460 µA MAX
* R1 = 600 Ω FOR ±15V SUPPLIES
R1 = 0 Ω FOR ±5V SUPPLIES
TYPICAL DROOP =
AV = 1
VS = ±5V, ±15V
CL = 10nF
1464 • TA02
MODE IN A IN B
Hold
1
1
Store
0
1
Store
1
0
LTC201 switch is open for logic "1".
1
LT1464/LT1465
W W
U
W
ABSOLUTE MAXIMUM RATINGS
Supply Voltage ..................................................... ±20V
Differential Input Voltage ...................................... ±40V
Input Current ....................................................... 20mA
Output Short-Circuit Duration ......................... Indefinite
Operating Temperature Range ............... – 40°C to 85°C
Specified Temperature Range ................ – 40°C to 85°C
Maximum Junction Temperature ......................... 150°C
Storage Temperature Range ................ – 65°C to 150°C
Lead Temperature (Soldering, 10 sec)................. 300°C
W
U
U
PACKAGE/ORDER INFORMATION
ORDER PART
NUMBER
TOP VIEW
OUT A 1
–IN A 2
8
7
A
+IN B 3
V–
B
4
N8 PACKAGE
8-LEAD PDIP
6
5
V+
OUT B
–IN B
+IN B
S8 PACKAGE
8-LEAD PLASTIC SO
LT1464ACN8
LT1464ACS8
LT1464CN8
LT1464CS8
S8 PART MARKING
TJMAX = 150°C, θJA = 130°C/ W (N)
TJMAX = 150°C, θJA = 190°C/ W (S)
14 OUT D
OUT A 1
–IN A 2
+IN A 3
V+
A
D
4
+IN B 5
13 –IN D
LT1465CN
LT1465CS
12 +IN D
11 V –
B
C
10 +IN C
–IN B 6
9
–IN C
OUT B 7
8
OUT C
N PACKAGE
14-LEAD PDIP
1464A
1464
ORDER PART
NUMBER
TOP VIEW
S PACKAGE
14-LEAD PLASTIC SO
TJMAX = 150°C, θJA = 110°C/ W (N)
TJMAX = 150°C, θJA = 150°C/ W (S)
Consult factory for Industrial and Military grade parts.
ELECTRICAL CHARACTERISTICS
VS = ±15V, VCM = 0V, TA = 25°C, unless otherwise noted.
MIN
LT1464AC
TYP
MAX
LT1464C/LT1465C
MIN
TYP
MAX
SYMBOL PARAMETER
CONDITIONS (Note 1)
VOS
Input Offset Voltage
VS = ±5V
VS = ±15V
0.4
0.6
0.8
2.0
0.4
0.6
0.8
2.0
UNITS
mV
mV
IOS
Input Offset Current
VS = ±5V
VS = ±15V
0.2
0.5
1.2
2.0
0.5
15
pA
pA
VS = ±5V
VS = ±15V
±0.4
±0.5
±2.0
±3.0
± 0.5
±20
pA
pA
IB
Input Bias Current
en
Input Noise Voltage
0.1Hz to 10Hz
2
2
µVP-P
Input Noise Voltage Density
fO = 10Hz
fO = 1000Hz
33
24
33
24
nV/√Hz
nV/√Hz
Input Noise Current Density
fO = 10Hz, 1kHz (Note 3)
0.4
0.4
fA/√Hz
CMRR
Common Mode Rejection Ratio
VCM = – 12.5V to 15V
76
85
74
85
dB
PSRR
Power Supply Rejection Ratio
VS = ±2.5V to ±20V
81
90
78
90
dB
1012
1012
1012
011
1012
1011
Ω
Ω
Ω
3
3
pF
RIN
Input Resistance—Differential
Common Mode
Common Mode
CIN
Input Capacitance
AVOL
Large-Signal Voltage Gain
2
VCM = – 12.5V to 8V
VCM = 8V to 15V
VO = ±10V, RL = 10k
VO = ±10V, RL = 2k
350
150
1000
450
300
150
900
450
V/mV
V/mV
VS = ±5V, VO = ±2V, RL = 10k
VS = ±5V, VO = ±1V, RL = 2k
100
50
250
170
100
50
250
170
V/mV
V/mV
LT1464/LT1465
ELECTRICAL CHARACTERISTICS
VS = ±15V, VCM = 0V, TA = 25°C, unless otherwise noted.
MIN
LT1464AC
TYP
MAX
LT1464C/LT1465C
MIN
TYP
MAX
SYMBOL PARAMETER
CONDITIONS (Note 1)
VOUT
Output Voltage Swing
RL = 10k
RL = 2k
VS = ±5V, RL = 2k
±13.5
±13.3
±3.5
±13.7
±13.5
±3.7
±13.5
±13.3
±3.5
±13.7
±13.5
±3.7
SR
Slew Rate
RL = 10k (Note 4)
0.5
0.9
0.5
0.9
V/µs
GBW
Gain Bandwidth Product
f = 10kHz
650
1000
650
1000
kHz
IS
Supply Current per Amplifier
200
200
145
135
UNITS
V
V
V
200
200
µA
µA
VS = ±5V
145
135
Channel Separation
f = 10Hz, VO = ±10V, RL = 10k
132
VOS
Offset Voltage Match (Note 7)
VS = ±5V
VS = ±15V
0.5
0.8
1.3
3.3
0.5
0.8
1.3
3.3
mV
mV
∆IB+
Noninverting Bias Current Match
(Note 7)
VS = ±5V
VS = ±15V
0.4
0.5
3.0
4.0
0.5
30
pA
pA
∆CMRR
Common Mode Rejection Match
(Notes 5, 7)
74
85
71
85
dB
∆PSRR
Power Supply Rejection Match
(Notes 5, 7)
78
88
74
88
dB
132
dB
VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C, unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS (Note 1)
MIN
LT1464AC
TYP
MAX
LT1464C/LT1465C
MIN
TYP
MAX
UNITS
VOS
Input Offset Voltage
VS = ±5V
VS = ±15V
●
●
0.5
0.9
1.4
2.8
0.5
0.9
1.4
2.8
mV
mV
∆VOS
∆Temp
Average Input Offset Voltage Drift
(Note 6)
●
7
20
7
20
µV/°C
IOS
Input Offset Current
●
10
50
25
450
pA
IB
Input Bias Current
●
60
150
150
750
pA
CMRR
Common Mode Rejection Ratio
VCM = – 12V to 15V
●
75
85
73
85
dB
PSRR
Power Supply Rejection Ratio
VS = ±3V to ±20V
●
80
89
77
89
dB
AVOL
Large-Signal Voltage Gain
VO = ±10V, RL = 10k
VO = ±10V, RL = 2k
●
●
200
100
600
350
200
100
600
350
V/mV
V/mV
VS = ±5V, VO = ±2V, RL = 10k
VS = ±5V, VO = ±1V, RL = 2k
●
●
80
45
200
150
80
45
200
150
V/mV
V/mV
VOUT
Output Voltage Swing
RL = 10k
RL = 2k
VS = ±5V, RL = 2k
●
●
●
±13.4
±13.2
±3.4
±13.6
±13.4
±3.6
±13.4
±13.2
±3.4
±13.6
±13.4
±3.6
SR
Slew Rate
RL = 10k (Note 4)
●
0.4
0.8
0.4
0.8
V/µs
GBW
Gain Bandwidth Product
f = 10kHz
●
540
870
540
870
kHz
IS
Supply Current per Amplifier
VS = ±5V
●
●
160
150
220
220
160
150
220
220
µA
µA
VOS
Offset Voltage Match (Note 7)
VS = ±5V
VS = ±15V
●
●
0.7
0.9
2.0
3.5
0.7
0.9
2.0
3.5
mV
mV
∆IB+
Noninverting Bias Current Match
(Note 7)
●
5
40
35
500
pA
V
V
V
3
LT1464/LT1465
ELECTRICAL CHARACTERISTICS
VS = ±15V, VCM = 0V, 0°C ≤ TA ≤ 70°C, unless otherwise noted.
MIN
LT1464AC
TYP
MAX
LT1464C/LT1465C
MIN
TYP
MAX
SYMBOL PARAMETER
CONDITIONS (Note 1)
UNITS
∆CMRR
Common Mode Rejection Match
(Notes 5, 7)
●
73
84
70
84
dB
∆PSRR
Power Supply Rejection Match
(Notes 5, 7)
●
77
85
73
85
dB
VS = ±15V, VCM = 0V, – 40°C ≤ TA ≤ 85°C (Note 2), unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS (Note 1)
MIN
LT1464AC
TYP
MAX
LT1464C/LT1465C
MIN
TYP
MAX
UNITS
VOS
Input Offset Voltage
VS = ±5V
VS = ±15V
●
●
0.6
1.0
1.5
3.0
0.6
1.0
1.5
3.0
mV
mV
∆VOS
∆Temp
Average Input Offset Voltage Drift
(Note 6)
●
7
20
7
20
µV/°C
IOS
Input Offset Current
●
40
150
60
700
pA
IB
Input Bias Current
●
200
500
300
2500
pA
CMRR
Common Mode Rejection Ratio
VCM = –12V to 15V
●
74
84
72
84
dB
PSRR
Power Supply Rejection Ratio
VS = ±3V to ±20V
●
79
88
76
88
dB
AVOL
Large-Signal Voltage Gain
VO = ±10V, RL = 10k
VO = ±10V, RL = 2k
●
●
175
80
400
250
175
80
400
250
V/mV
V/mV
VS = ±5V, VO = ±2V, RL = 10k
VS = ±5V, VO = ±1V, RL = 2k
●
●
70
45
180
140
70
45
180
140
V/mV
V/mV
VOUT
Output Voltage Swing
RL = 10k
RL = 2k
VS = ±5V, RL = 2k
●
●
●
±13.2
±13.0
±3.2
±13.4
±13.2
±3.4
±13.2
±13.0
±3.2
±13.4
±13.2
±3.4
SR
Slew Rate
RL = 10k (Note 4)
●
0.35
0.7
0.35
0.7
V/µs
GBW
Gain Bandwidth Product
f = 10kHz
●
510
850
510
850
kHz
IS
Supply Current per Amplifier
VS = ±5V
●
●
165
160
230
230
165
160
230
230
µA
µA
VOS
Offset Voltage Match (Note 7)
VS = ±5V
VS = ±15V
●
●
0.8
1.0
2.5
4.0
0.8
1.0
2.5
4.0
mV
mV
∆IB+
Noninverting Bias Current Match
(Note 7)
●
20
100
70
800
pA
∆CMRR
Common Mode Rejection Match
(Notes 5, 7)
●
72
83
69
83
dB
∆PSRR
Power Supply Rejection Match
(Notes 5, 7)
●
76
81
73
81
dB
The ● denotes specifications which apply over the full operating
temperature range.
Note 1: Typical parameters are defined as 60% yield of parameter
distributions of individual amplifiers, i.e., out of 100 LT1465s (or 100
LT1464s) typically 240 op amps (or 120) will be better than the indicated
specification.
Note 2: The LT1464 and LT1465 are designed, characterized and expected
to meet these extended temperature limits, but are not tested at – 40°C
and 85°C. Guaranteed I grade parts are available, consult factory.
Note 3: Current noise is calculated from the formula: in = (2qib)1/2 where
q = (1.6)(10)–19 coulomb. The noise of source resistors up to 1GΩ
swamps the contribution of current noise.
4
V
V
V
Note 4: Slew rate is measured in AV = –1; input signal is ±7.5V, output is
measured at ±2.5V.
Note 5: ∆CMRR and ∆PSRR are defined as follows:
1. CMRR and PSRR are measured in µV/V on the individual amplifiers.
2. The difference is calculated between the matching sides in µV/V.
3. The result is converted to dB.
Note 6: This parameter is not 100% tested.
Note 7: Matching parameters are the difference between amplifiers A and
D and between B and C on the LT1465; between the two amplifiers on the
LT1464.
LT1464/LT1465
U W
TYPICAL PERFORMANCE CHARACTERISTICS
Input Bias and Offset Current vs
Temperature
Input Bias Current Over the
Common Mode Range
16
80
LT1464/LT1465
LT1464A
VS = ±15V
TA = 25°C
1000
100
BIAS CURRENT
10
15
COMMON MODE RANGE (V)
70
60
INPUT BIAS CURRENT (pA)
50
40
30
20
10
OFFSET CURRENT
1
0
25
75
100
50
AMBIENT TEMPERATURE (°C)
125
–5
0
–10
5
10
COMMON MODE INPUT VOLTAGE (V)
VS = ±5V
100
75
30
1/f CORNER = 9Hz
20
10
30
100 300 1k
FREQUENCY (Hz)
RL = 2k, VS = ±15V
400
0 25 50 75 100 125 150
TEMPERATURE (°C)
LT1464 • TPC07
2
6
4
TIME (SEC)
8
1.75
Channel Separation vs Frequency
SLEW FALL
1.50
1.25
1.5
160
1.3
140
1.1
GAIN BANDWIDTH
1.00
0.9
SLEW RISE
VS = ±15V
0.50
–75 –50 –25
10
LT1464 • TPC06
Slew Rate, Gain Bandwidth
Product vs Temperature
0.75
RL = 2k, VS = ±5V
RL = 10k, VS = ±5V
0
10k
LT1464 • TPC05
SLEW RATE (V/µs)
RL = 10k, VS = ±15V
800
3k
0.7
0.5
0 25 50 75 100 125 150
TEMPERATURE (°C)
LT1464 • TPC08
GAIN BANDWIDTH (MHz)
VOLTAGE GAIN (V/mV)
0.1Hz to 10Hz Noise
50
3
VO = ±10V, VS = ±15V
VO = ±2V, RL = 10k, VS = ±5V
VO = ±1V, RL = 2k, VS = ±5V
100 125
LT1464 • TPC03
10
100 125
Voltage Gain vs Temperature
0
–75 –50 –25
–75 –50 –25 0
25 50 75
TEMPERATURE (°C)
15
VS = ±15V
TA = 25°C
70
LT1464 • TPC04
200
VS = ±15V
NOISE VOLTAGE (2µV/DIV)
RMS VOLTAGE NOISE DENSITY (nV/√Hz)
SUPPLY CURRENT PER AMPLIFIER (µA)
VS = ±15V
150
600
–13
Voltage Noise vs Frequency
175
1k
–12
LT1464 • TPC02
200
1.2k
–11
–15
100
1.4k
12
–14
Supply Current vs Temperature
50
25 50 75
–75 –50 –25 0
TEMPERATURE (°C)
13
–10
–15
LT1464 • TPC01
125
14
0
CHANNEL SEPARATION (dB)
INPUT BIAS AND OFFSET CURRENT (pA)
10000
Common Mode Range vs
Temperature
VS = ±15V
TA = 25°C
VIN = 10VP-P
RL = 10k
120
100
80
60
10
100
10k
1k
FREQUENCY (Hz)
100k
1M
LT1464 • TPC09
5
LT1464/LT1465
U W
TYPICAL PERFORMANCE CHARACTERISTICS
120
VS = ±15V
TA = 25°C
60
PHASE
60
30
40
20
20
GAIN
10
0
60
40
–40
0.1
1
FREQUENCY (MHz)
NEGATIVE
SUPPLY
20
–20
–10
0.01
60
40
20
0
POSITIVE
SUPPLY
80
CMRR (dB)
VOLTAGE GAIN (dB)
PHASE MARGIN = 66°,
CL = 10pF
100
80
PHASE MARGIN (DEG)
80
TA = 25°C
VS = ±15V
TA = 25°C
100
50
40
120
100
PSRR (dB)
70
Power Supply Rejection Ratio vs
Frequency
Common Mode Rejection Ratio vs
Frequency
Gain and Phase vs Frequency
0
0
10
10
100
10k
1k
FREQUENCY (Hz)
10k
10
1M
100
1k
10k
FREQUENCY (Hz)
LT1464 • TPC10
LT1464 • TPC12
LT1464 • TPC11
Common Mode and Power Supply
Rejections vs Temperature
Phase Margin vs CLOAD
100
95
PSRR
70
CMRR, PSRR (dB)
PHASE MARGIN (DEG)
80
60
50
40
30
20
90
CMRR
85
80
CL = 0pF
VS = ±15V
TA = 25°C
AV = 1
VS = ±2.5V TO ±20V FOR PSRR
VS = ±15V, VCM = –12V TO 15V FOR CMRR
OUTPUT IMPEDANCE (Ω)
VS = ±15V
TA = 25°C
90
Closed-Loop Output Impedance
1000
100
1M
100k
100
CL = 1000pF
10
CL = 10nF
1
75
10
70
25 50 75
–75 –50 –25 0
TEMPERATURE (°C)
0
1
100
1000
10
CAPACITIVE LOAD (pF)
10000
20µs/DIV
0V
AV = 1
CL = 10pF
LT1464 • TPC16
1k
10k 100k
FREQUENCY (Hz)
1M
10M
Small-Signal Response,
VS = ±5V, ±15V, CLOAD = 1000pF
50mV/DIV
0V
100
LT1464 • TPC15
Small-Signal Response,
VS = ±5V, ±15V
20mV/DIV
5V/DIV
Large-Signal Response,
VS = ±15V
6
10
LT1464 • TPC14
LT1464 • TPC13
AV = 1
CL = 10pF
0.1
100 125
0.5µs/DIV
0V
AV = 1
CL = 1000pF
LT1464 • TPC17
5µs/DIV
LT1464 • TPC18
LT1464/LT1465
U
W
U
U
APPLICATIONS INFORMATION
Phase Reversal Protection
Most industry standard JFET input single, dual and quad
op amps exhibit phase reversal at the output when the
negative common mode limit at the input is exceeded.
Common mode range is at a premium at ±5V supplies. The
Figures show a ±5.2V sine wave input (Figure 1a), the
response of a competing JFET input op amp in the unity-
(1a) ±5.2V Sine Wave
gain follower mode (Figure 1b) and the response of the
LT1464/LT1465 (Figure 1c).
The phase reversal of Figure 1b can cause lock-up in servo
systems. The LT1464/LT1465 does not phase-reverse
when the common mode input is anywhere within the
supplies.
LT1464 • F01b
LT1464 • F01a
(1b) Typical JFET Input Op Amp
with ±5V Supplies
LT1464 • F01c
(1c) LT1464/LT1465 Output
with ±5V Supplies
Figure 1. Voltage Follower with Input Exceeding the Common Mode Range (VS = ±5V)
7
LT1464/LT1465
U
TYPICAL APPLICATIONS
Low Voltage 0.016% Voltage to Frequency Converter
LT1009
VREF = –2.5V
R3
1k
–5V
C4
1µF
17
1/2 LTC®1043
5V
8
7
fOUT: 0kHz to 30kHz
11
14
RIN
VIN
0V TO 5V
6.19k
13
12
4
GAIN
2.5k
5
)( )
VIN
1
(RIN)(CIN) VREF
16
8
–
7
1/2 LT1464
C1
0.1µF
(
CIN
0.01µF
5V
6
fOUT =
+
4
–5V
C2
30pF
R1
20k
R3
330k
Q1
2N2907A
C3
1µF
–5V
LT1464 • TA03
10Hz 4th Order Chebyshev Lowpass Filter (0.01dB Ripple)
R2
237k
R5
154k
C1
33nF
R1
237k
R3
249k
VIN
C2
100nF
C3
10nF
15V
2
–
4
1/4 LT1465
3
1
R4
154k
R6
249k 13
–
12
+
+
11
C4
330nF
1/4 LT1465
–15V
TYPICAL OFFSET ≈ 0.6mV
1% TOLERANCES
FOR VIN = 10VP-P,V OUT = –110dB AT f > 300Hz
V OUT = –6dB AT f = 16Hz
THE LOW INPUT BIAS CURRENTS ALLOW THE USE OF HIGH RESISTOR VALUES
8
14
VOUT
LT1464 • TA05
LT1464/LT1465
W
W
SI PLIFIED SCHE ATIC
VCC
R20
R6
R3
R4
Q3
×4
Q4
R7
Q5
J4
J3
R5
Q17
Q7
R17
– IN
Q18
Q20
J5
R22
C2
R10
Q16
+IN
Q22
R18
OUT
J1 J2
VCC
VCC
Q21
C1
Q15
Q28
VEE
Q25
Q13
Q14
Q1
Q8
R5
Q23
R16
Q11
10µA
R1
R19
R1O
Q29
Q2
Q9
R2
R5
Q19
Q24
VEE
Q10
Q26
Q27
R10
1464 SS
VEE
9
LT1464/LT1465
U
PACKAGE DESCRIPTION Dimensions in inches (millimeters) unless otherwise noted.
N8 Package
8-Lead PDIP (Narrow 0.300)
(LTC DWG # 05-08-1510)
0.400*
(10.160)
MAX
8
7
6
5
1
2
3
4
0.255 ± 0.015*
(6.477 ± 0.381)
0.300 – 0.325
(7.620 – 8.255)
0.065
(1.651)
TYP
0.009 – 0.015
(0.229 – 0.381)
(
+0.635
–0.381
0.125
(3.175)
MIN
0.005
(0.127)
MIN
+0.025
0.325 –0.015
8.255
0.130 ± 0.005
(3.302 ± 0.127)
0.045 – 0.065
(1.143 – 1.651)
)
0.018 ± 0.003
(0.457 ± 0.076)
0.100 ± 0.010
(2.540 ± 0.254)
0.015
(0.380)
MIN
N8 0695
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
S8 Package
8-Lead Plastic Small Outline (Narrow 0.150)
(LTC DWG # 05-08-1610)
0.189 – 0.197*
(4.801 – 5.004)
8
7
6
5
0.150 – 0.157**
(3.810 – 3.988)
0.228 – 0.244
(5.791 – 6.197)
1
0.010 – 0.020
× 45°
(0.254 – 0.508)
0.008 – 0.010
(0.203 – 0.254)
0.053 – 0.069
(1.346 – 1.752)
0°– 8° TYP
0.016 – 0.050
0.406 – 1.270
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
10
0.014 – 0.019
(0.355 – 0.483)
2
3
4
0.004 – 0.010
(0.101 – 0.254)
0.050
(1.270)
BSC
SO8 0695
LT1464/LT1465
U
PACKAGE DESCRIPTION Dimensions in inches (millimeters) unless otherwise noted.
N Package
14-Lead PDIP (Narrow 0.300)
(LTC DWG # 05-08-1510)
0.770*
(19.558)
MAX
14
13
12
11
10
9
8
1
2
3
4
5
6
7
0.255 ± 0.015*
(6.477 ± 0.381)
0.130 ± 0.005
(3.302 ± 0.127)
0.300 – 0.325
(7.620 – 8.255)
0.045 – 0.065
(1.143 – 1.651)
0.015
(0.380)
MIN
0.065
(1.651)
TYP
0.009 – 0.015
(0.229 – 0.381)
+0.025
0.325 –0.015
0.005
(0.125)
MIN
0.100 ± 0.010
(2.540 ± 0.254)
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
(
+0.635
8.255
–0.381
)
0.018 ± 0.003
(0.457 ± 0.076)
0.125
(3.175)
MIN
N14 0695
S Package
14-Lead Plastic Small Outline (Narrow 0.150)
(LTC DWG # 05-08-1610)
0.337 – 0.344*
(8.560 – 8.738)
14
13
12
11
10
9
8
0.228 – 0.244
(5.791 – 6.197)
0.150 – 0.157**
(3.810 – 3.988)
1
0.010 – 0.020
× 45°
(0.254 – 0.508)
0.008 – 0.010
(0.203 – 0.254)
2
3
4
5
6
0.053 – 0.069
(1.346 – 1.752)
0.004 – 0.010
(0.101 – 0.254)
0° – 8° TYP
0.016 – 0.050
0.406 – 1.270
0.014 – 0.019
(0.355 – 0.483)
7
0.050
(1.270)
TYP
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
S14 0695
11
LT1464/LT1465
U
TYPICAL APPLICATION
Low Voltage 0.027% Frequency to Voltage Converter
R2
75k*
10k
GAIN TRIM
C2
1µF
R1
1k
13
LT1004-1.2C
2
14
C1
1µF
–
8
1/2 LT1464
3
12
fIN = FREQUENCY IN
0kHz to 30kHz
5V
1/4 LTC1043
VREF = –1.235V
–5V
16
CS
1000pF
4
5V
17
–5V
+
1
0V TO 3V
OUTPUT
4
–5V
V OUT = (R2)(CS)(VREF)fIN
*TRW#MTR-5/120ppm
LT1464 • TA04
RELATED PARTS
PART NUMBER
DESCRIPTION
COMMENTS
LT1057
Dual JFET Input Precision, High Speed Op Amp
Fast Settling Time, 14V/µs Slew Rate, 5Mhz GBW, 450µV
VOS (Max), 50pA IOS (Max)
LT1113
Dual Low Noise, Precision, JFET Input Op Amp
6nV/√Hz Input Noise Voltage Density, 480pA IB, 6.3MHz GBW
LT1169
Dual Low Noise, Picoampere Bias Current,
JFET Input Op Amp
20pA IB, 8nV/√Hz en, 5.3MHz GBW, 1.5pF Input Capacitance
LT1457
Dual Precision JFET Input Op Amp C-Load
Drives 10,000pF Capacitive Load, 450µV VOS (Max), 4µV/°C Drift
LT1462/LT1463
Dual/Quad Micropower, C-Load Picoampere Bias
Current JFET Input Op Amps
28µA Supply Current Per Amplifiers Drives 10µF Capacitive Load, 175kHz GBW
12
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417● (408)432-1900
FAX: (408) 434-0507● TELEX: 499-3977 ● www.linear-tech.com
14645fa LT/GP 0197 5K REV A • PRINTED IN USA
 LINEAR TECHNOLOGY CORPORATION 1996
Similar pages