LITEON LTL2F7JSDNN Property of lite-on only Datasheet

 Low Current
LTL1CHJxDNN
60 degree
LTL2F7JxDNN
60 degree
LTL2R3JxDNN
45 degree
Features
!
!
!
!
!
!
!
Low Power Consumption.
High Efficiency.
CMOS-MOS Compatible.
TTL Compatible.
Wide Viewing Angle.
Choice of Package.
Choice of Color
Description
These tinted diffuse LED lamps are designed and optimized specifically for low DC current operation.
Luminous intensity and forward voltage are tested at 2mA to assure consistent brightness at TTL output
current level.
Application
!
!
!
!
Low Power DC Circuits.
Telecommunications Indicators.
Portable Equipment.
Keyboard Indicators.
Devices
Part No. (LTL)
Lens
Source Color
1CHJDDNN / 2F7JDDNN / 2R3JDDNN
Red Diffused
AlInGap Hyper Red
1CHJRDNN / 2F7JRDNN / 2R3JRDNN
Red Diffused
AlInGap Super Red
1CHJEDNN / 2F7JEDNN / 2R3JEDNN
Red Diffused
AlInGap Red
1CHJFDNN / 2F7JFDNN / 2R3FDNN
Amber Diffused
AlInGap Yellow Orange
1CHJYDNN / 2F7JYDNN / 2R3JYDNN
Yellow Diffused
AlInGap Amber Yellow
1CHJSDNN / 2F7JSDNN / 2R3JSDNN
Yellow Diffused
AlInGap Yellow
1CHJGDNN / 2F7JGDNN / 2R3JGDNN
Green Diffused
AlInGap Green
!"
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
!"
Absolute Maximum Ratings at TA=25°°C
Hyper
Red
Super
Red
Red
Yellow
Orange
Amber
Yellow
Yellow
Green
Unit
75
75
75
75
75
75
75
mW
90
90
90
60
60
60
60
mA
Continuous Forward Current
30
30
30
30
30
30
30
mA
Derating Linear From 70°C
0.4
0.4
0.4
0.4
0.4
0.4
0.4
mA / °C
5
5
5
5
5
5
5
V
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Reverse Voltage(IR =100 A)
Operating Temperature Range
-40°C to + 100°C
Storage Temperature Range
-55°C to + 100°C
Lead Soldering Temperature
260 for 5 Seconds
[1.6mm(.063") From Body]
!"
Electrical / Optical Characteristics at TA=25 (F Series)
Parameter
Luminous
Symbol
Iv
Intensity
Part No. (LTL)
Min.
Typ.
1CHJDDNN
1CHJRDNN
1CHJEDNN
1CHJFDNN
1CHJYDNN
1CHJSDNN
1CHJGDNN
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.6
7.2
7.2
7.2
7.2
7.2
mcd
60
deg
2 θ1/2
Viewing Angle
Peak Emission
λP
Wavelength
Dominant
λd
Wavelength
Spectral Line
∆λ
Half-Width
Forward Voltage
VF
Reverse Current
IR
Capacitance
C
1CHJDDNN
1CHJRDNN
1CHJEDNN
1CHJFDNN
1CHJYDNN
1CHJSDNN
1CHJGDNN
1CHJDDNN
1CHJRDNN
1CHJEDNN
1CHJFDNN
1CHJYDNN
1CHJSDNN
1CHJGDNN
1CHJDDNN
1CHJRDNN
1CHJEDNN
1CHJFDNN
1CHJYDNN
1CHJSDNN
1CHJGDNN
1CHJDDNN
1CHJRDNN
1CHJEDNN
1CHJFDNN
1CHJYDNN
1CHJSDNN
1CHJGDNN
650
639
632
611
595
588
575
639
632
624
605
592
587
572
20
20
20
17
15
15
15
1.8
1.8
1.8
1.8
1.8
1.8
1.8
40
Max.
Unit
Test Condition
IF = 2mA
Note 1
Note 2
nm
Note 3 (Fig.5)
Measurement
@ peak (Fig.1)
nm
Note 5
nm
2.4
2.3
2.4
2.4
2.4
2.4
2.4
V
IF = 2mA
100
µA
VR = 5V
pF
VF = 0, f = 1 MHz
NOTES:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. Luminous intensity rank classified products support two ranks.
3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
4. Iv classification code is marked on each packing bag.
5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which
defines the color of the device.
!"
"
Electrical / Optical Characteristics at TA=25 (H Series)
Parameter
Luminous
Symbol
Iv
Intensity
Part No. (LTL)
Min.
Typ.
2F7JDDNN
2F7JRDNN
2F7JEDNN
2F7JFDNN
2F7JYDNN
2F7JSDNN
2F7JGDNN
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.6
7.2
7.2
7.2
7.2
7.2
mcd
60
deg
2 θ1/2
Viewing Angle
Peak Emission
λP
Wavelength
Dominant
λd
Wavelength
Spectral Line
∆λ
Half-Width
Forward Voltage
VF
Reverse Current
IR
Capacitance
C
2F7JDDNN
2F7JRDNN
2F7JEDNN
2F7JFDNN
2F7JYDNN
2F7JSDNN
2F7JGDNN
2F7JDDNN
2F7JRDNN
2F7JEDNN
2F7JFDNN
2F7JYDNN
2F7JSDNN
2F7JGDNN
2F7JDDNN
2F7JRDNN
2F7JEDNN
2F7JFDNN
2F7JYDNN
2F7JSDNN
2F7JGDNN
2F7JDDNN
2F7JRDNN
2F7JEDNN
2F7JFDNN
2F7JYDNN
2F7JSDNN
2F7JGDNN
650
639
632
611
595
588
575
639
632
624
605
592
587
572
20
20
20
17
15
15
15
1.8
1.8
1.8
1.8
1.8
1.8
1.8
40
Max.
Unit
Test Condition
IF = 2mA
Note 1
Note 2
nm
Note 3 (Fig.5)
Measurement
@ peak (Fig.1)
nm
Note 5
nm
2.4
2.3
2.4
2.4
2.4
2.4
2.4
V
IF = 2mA
100
µA
VR = 5V
pF
VF = 0, f = 1 MHz
NOTES:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. Luminous intensity rank classified products support two ranks.
3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
4. Iv classification code is marked on each packing bag.
5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which
defines the color of the device.
!"
#
Electrical / Optical Characteristics at TA=25 (H Series)
Parameter
Luminous
Symbol
Iv
Intensity
Viewing Angle
Peak Emission
λP
λd
Wavelength
Spectral Line
Min.
Typ.
2R3JDDNN
2R3JRDNN
2R3JEDNN
2R3JFDNN
2R3JYDNN
2R3JSDNN
2R3JGDNN
3.8
3.8
3.8
3.8
3.8
3.8
3.8
7.2
8.0
10.6
10.6
10.6
10.6
10.6
mcd
45
deg
2 θ1/2
Wavelength
Dominant
Part No. (LTL)
∆λ
Half-Width
Forward Voltage
VF
Reverse Current
IR
Capacitance
C
2R3JDDNN
2R3JRDNN
2R3JEDNN
2R3JFDNN
2R3JYDNN
2R3JSDNN
2R3JGDNN
2R3JDDNN
2R3JRDNN
2R3JEDNN
2R3JFDNN
2R3JYDNN
2R3JSDNN
2R3JGDNN
2R3JDDNN
2R3JRDNN
2R3JEDNN
2R3JFDNN
2R3JYDNN
2R3JSDNN
2R3JGDNN
2R3JDDNN
2R3JRDNN
2R3JEDNN
2R3JFDNN
2R3JYDNN
2R3JSDNN
2R3JGDNN
650
639
632
611
595
588
575
639
632
624
605
592
587
572
20
20
20
17
15
15
15
1.8
1.8
1.8
1.8
1.8
1.8
1.8
40
Max.
Unit
Test Condition
IF = 2mA
Note 1
Note 2
nm
Note 3 (Fig.5)
Measurement
@ peak (Fig.1)
nm
Note 5
nm
2.4
2.3
2.4
2.4
2.4
2.4
2.4
V
IF = 2mA
100
µA
VR = 5V
pF
VF = 0, f = 1 MHz
NOTES:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. Luminous intensity rank classified products support two ranks.
3. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
4. Iv classification code is marked on each packing bag.
5. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which
defines the color of the device.
!"
$
Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)
!"
Similar pages