ETC LTV-703VSDTA1-V

High Collector-Emitter
Voltage Type Photocoupler
LTV-703V Series
Features
Package Dimensions
Note:
1. Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z : Taiwan, Y : Thailand).
4. Rank shall be or shall not be marked.
5. All dimensions are in millimeters (inches).
6. Tolerance is 0.25mm (.010 ) unless otherwise noted.
7. Specifications are subject to change without notice.
Applications
1. Telephone sets, telephone exchangers.
2. System appliances, measuring instruments.
3. Signal transmission between circuits of different
potentialsand impedances.
Ordering Information
Part Number
LTV-703V
LTV-703VM
LTV-703VS
LTV-703VS-TA
LTV-703VS-TA1
LTV703V-V
LTV703VM-V
LTV703VS-V
LTV703VSTA-V
LTV703VSTA1-V
Package
6-pin
6-pin
6-pin
6-pin
6-pin
6-pin
6-pin
6-pin
6-pin
6-pin
DIP
(leads with 0.4" spacing)
(lead bends for surface mount)
(tape and reel packaging of type
(tape and reel packaging of type
DIP
(leads with 0.4" spacing)
(lead bends for surface mount)
(tape and reel packaging of type
(tape and reel packaging of type
Safety Standard Approval
I)
II)
UL approved
TUV approved
CSA approved
FIMKO approved
VDE approved
NEMKO approved
SEMKO approved
DEMKO approved
Application part
number
PHOTOCOUPLER
High collector-emitter voltage(VCEO=70V)
High input-output isolation voltage:
(VISO : 5,000Vrms)
Directly connectable to TTL
UL approved (No. E113898)
TUV approved (No.R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 193422)
NEMKO approved (No. P96103013)
DEMKO approved (No. 303968)
SEMKO approved (No. 9646047/01-30)
VDE approved (No. 094722)
Options available :
-Leads with 0.4"(10.16mm)spacing (M Type)
-Leads bends for surface mounting(S Type)
-Tape and Reel of Type I for SMD(Add"-TA"Suffix)
-Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
-VDE 0884 approvals (Add"-V"Suffix)
LTV - 703V
LTV - 703V
I)
II)
12-45
Absolute Maximum Ratings
(Ta=25 )
Parameter
Input
Symbol
Rating
Unit
Forward Current
IF
50
mA
Reverse Voltage
VR
6
V
Power Dissipation
P
70
mW
Collector-Emitter Voltage
V CEO
70
V
Emitter-Collector Voltage
V ECO
6
V
IC
50
mA
Collector Current
Output
PC
160
mW
Collector-Base Voltage
V CBO
70
V
Emitter-Base Voltage
V EBO
6
V
Total Power Dissipation
P tot
200
mW
Operating Temperature
Topr
-30~+100
Storage Temperature
Tstg
-55~+125
Collector Power Dissipation
*1.Isolation Voltage
V iso
5
*2.Soldering Temperature
Tsol
260
KV rms
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.
Electrical/Optical Characteristics
Transfer Characteristics
Output
Input
Parameter
Forward Voltage
IR
Ct
*Current Transfer Ratio
Collector-emitter
Saturation Voltage
Isolation Resistance
Min.
VF
Terminal Capacitance
Typ.
Max.
Unit
1.2
1.4
V
Conditions
10
A
30
250
pF
V=0, f=1KHz
100
I F=20mA
V R =4V
nA
V CE =20V
70
V
I C=0.1mA
BV ECO
6
V
I E=10
BV CBO
70
V
I C=0.1mA
IC
4
32
mA
I F=10mA V CE =5V
CTR
40
320
%
I F=10mA V CE =5V
0.2
V
I F=20mA, I C=1mA
1.0
pF
I CEO
BV CEO
V CE(sat)
R ISO
0.1
5
1010
A
DC500V, 40~60% R.H.
1011
Floating Capacitance
Cf
0.6
Cut-off Frequency
fc
80
Response Time (Rise)
tr
4
15
s
V=0, f=1MHz
V CE =5V, I C =2mA
R L=100 , -3dB
V CE =2V, I C =2mA
Response Time (Fall)
tf
3
15
s
R L=100
IC
*CTR= I F
12-46
Symbol
Reverse Current
Collector Dark Current
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
Collector-Base
Breakdown Voltage
Collector Current
(Ta=25 )
100%
KHz
Supplement
Rank Table of Current Transfer Ratio CTR
Model No.
Rank Mark
LTV-703V
A
40~80
LTV-703V
B
63~125
LTV-703V
C
100~200
LTV-703V
D
160~320
LTV-703V
A or B or C or D
Conditions
CTR(%)
40~320
I F =10mA V CE =5V Ta=25
PHOTOCOUPLER
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
12-47
12-48