LIGITEK LUY3333-H0 Super bright round type led lamp Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SUPER BRIGHT ROUND TYPE LED LAMPS
LUY3333/H0
DATA SHEET
DOC. NO :
QW0905-LUY3333/H0
REV.
:
A
DATE
:
12 - Oct - 2005
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LUY3333/H0
Page 1/4
Package Dimensions
5.0
5.9
7.6
8.6
1.5MAX
25.0MIN
□0.5
TYP
1.0MIN
2.54TYP
+
-
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30°
30°
-60°
100% 75% 50%
60°
25%
0
25%
50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/4
PART NO. LUY3333/H0
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Symbol
Parameter
UNIT
UY
Forward Current
IF
50
mA
Peak Forward Current
Duty 1/10@10KHz
IFP
90
mA
Power Dissipation
PD
120
mW
Reverse Current @5V
Ir
10
μA
Electrostatic Discharge
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
Soldering Temperature
Tsol
Max 260 ℃ for 5 sec Max
(2mm from body)
Typical Electrical & Optical Characteristics (Ta=25 ℃)
COLOR
PART NO
MATERIAL
Emitted
LUY3333/H0
AlGaInP
Yellow
Forward
Dominant Spectral
voltage
wave
halfwidth
@20mA(V)
length
△λ nm
λDnm
@20mA(mcd)
Min. Max. Min.
Lens
Water Clear
Luminous
intensity
595
15
1.7
Note : 1.The forward voltage data did not including ± 0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
2.6
Viewing
angle
2θ 1/2
(deg)
Typ.
1100 1800
38
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page3/4
PART NO. LUY3333/H0
Typical Electro-Optical Characteristics Curve
UY CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
0.1
2.5
2.0
1.5
1.0
0.5
0
2.0
1.0
3.0
5.0
4.0
1.0
10
Fig.4 Relative Intensity vs. Temperature
1.2
Relative Intensity @20mA
Normalize @25 ℃
Forward Voltage@20mA
Normaliz @25 ℃
Fig.3 Forward Voltage vs. Temperature
1.1
1.0
0.9
0.8
-20
0
20
40
60
80
100
Relative Intensity @20mA
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0
550
600
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0
-40
-20
0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature( ℃)
500
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
650
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LUY3333/H0
Page 4/4
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resisance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under ondition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5 ℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5 ℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hous.
1.Ta=105 ℃±5℃ &-40 ℃±5 ℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Similar pages