Sanyo LV8075LP Constant-voltage control 1-channel forward/reverse motor driver Datasheet

Ordering number : ENA1133A
Bi-CMOS LSI
Constant-voltage Control 1-channel
Forward/Reverse Motor Driver
LV8075LP
Overview
LV8075LP is a constant voltage control 1-channel forward/reverse motor driver IC.
Features
• Constant voltage control forward/reverse H-bridge
Parallel input-Analog value must be entered for constant voltage reference input
V (OUT) = V (VC) × 2.0
• Built-in thermal protection circuit and under-voltage detection protection circuit
Specifications
Absolute Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Symbol
Maximum control power supply voltage
VCC max
6
V
Maximum load power supply voltage
VM max
6
V
Maximum control pin voltage
VC max
6
V
Maximum output current
IO max
VREF maximum current
IREF max
Allowable power dissipation
Pd max
Conditions
OUT1, 2
Ratings
Unit
0.5
VREF
Mounted on a circuit board*
A
1
mA
700
mW
Operating temperature
Topr
-30 to +85
°C
Storage temperature
Tstg
-40 to +150
°C
* Specified circuit board : 40.0×50.0×0.8mm3 : glass epoxy four-layer board
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
21710 SY 20100210-S00003 / 51408 MS PC 20080408-S00008 No.A1133-1/4
LV8075LP
Allowable Operating Range at Ta = 25°C, SGND = PGND = 0V
Parameter
Symbol
Control power-supply voltage
Conditions
Ratings
Unit
VCC
2.5 to 5.5
Load power-supply voltage
VM
2.5 to 5.5
V
Output control input voltage
Vcont
0 to VCC-1
V
Input pin “H” voltage
VINH
IN1, 2,EN pin
VCC × 0.6 to VCC+0.3
V
Input pin “L” voltage
VINL
IN1, 2,EN pin
-0.1 to VCC × 0.2
V
VC pin
V
Electrical Characteristics at Ta = 25°C, VCC = VM = 3.0V, PGND = SGND = 0V, unless otherwise specified.
Parameter
Symbol
Ratings
Conditions
min
typ
Unit
max
Standby currfent consumption 1
ICCO
EN, IN1, 2 = H/L/L or EN = L
1
μA
Standby current consumption 1
IMO
EN, IN1, 2 = H/L/L or EN = L
1
μA
Operating current consumption
VCC1
0.5
1.0
mA
15
20
μA
0
1
μA
EN = H, IN1 or IN2 = H
H-level input current
IINH
200kΩ pull-down, VIN = 3V
L-level input current
IINL
VIN = 0V
Reference voltage output
VREF
IREF = 500μF
Output on-resistance
Ron1
Total of top and bottom
Constant-voltage control output
VOUT
VC = 1.0V
10
1.4
1.5
1.6
V
1.75
2.5
Ω
1.94
2.0
2.06
V
voltage
Under-voltage detection
VCS
VCC Voltage
2.1
2.2
2.35
V
TSD
Design guarantee value*
150
180
210
°C
operating voltage
Thermal protection temperature
Output rise time
Tr
(Note)
1.6
3.0
μs
Output fall time
Tf
(Note)
0.2
1.0
μs
* Design guarantee value and no measurement is made.
Note : Specify rising control start time → 90% of OUT output voltage, and falling control start time → 10% of OUT output voltage.
Package Dimensions
unit : mm (typ)
3318
Pd max -- Ta
SIDE VIEW
TOP VIEW
BOTTOM VIEW
(0.125)
(0.13)
2.6
16
0.4
2.6
(C0.116)
2
1
0.5
LASER MARKED
INDEX
(0.55)
Allowable power dissipation, Pd max -- W
0.8
0.6
0.4
0.36
0.2
0
-30 -20
SIDE VIEW
Specified board : 40.0×50.0×0.8mm3
4-layer grass epoxy
0.7
0
20
40
60
8085
100
0.25
(0.035)
0.8
Ambient temperature, Ta -- °C
SANYO : VCT16(2.6X2.6)
No.A1133-2/4
LV8075LP
Pin Assignment
IN1
(NC)
(NC)
VREF
16
15
14
13
IN2
1
12 SGND
EN
2
11 VC
VM
3
10 VCC
OUT1
4
9
5
6
7
PGND PGND
(NC)
OUT2
8
(NC)
Top view
Block Diagram
VCC
Start-up
control
block
EN
VREF
Thermal
protection
circuit
Under-voltage
detection
circuit
Reference
voltage
circuit
200kΩ
VM
IN1
200kΩ
Motor control
logic
IN2
OUT1
OUT2
Constant-voltage
control pre-driver
200kΩ
PGND
VC
SGND
Truth Table
Constant voltage output H-bridge
EN
IN1
IN2
H
H
H
L
H
L
L
-
-
off
L
OUT1
OUT2
H
L
L
Brake
L
H
L
Forward evolution
L
H
Reverse rotation
off
off
Stand by
off
Stand by
Mode
“-“ entries indicate don't care state, “off” indicates output off state, insert 20kΩ impedance across PGND.
Constant voltage output value : V (OUT) = V (VC)×2.0
No.A1133-3/4
LV8075LP
Pin Functions
Pin No.
Pin name
Description
10
VCC
Power supply pin for control
5, 6
PGND
Power ground pins for IC
12
SGND
IC system ground
3
VM
Power supply pin for constant voltage output H-bridge
2
EN
IC enable pin. Power-saving mode is established when L-level is applied.
Pulled-down with 200kΩ
16, 1
IN1, 2
Input pins for manipulating constant-current output H-bridge (OUT1, 2).
Pulled-down with 200kΩ
4, 9
OUT1, 2
Constant voltage H-bridge output pins
13
VREF
Reference voltage output, outputs 1.5V
11
VC
Analog voltage input pin for constant voltage setting.
Must be short-circuited to VCC pin when using saturation control.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of February, 2010. Specifications and information herein are subject
to change without notice.
PS No.A1133-4/4
Similar pages