ETC2 LXZ1-PB01-0032 Color and white led portfolio Datasheet

Color and White
LED Portfolio
Illuminating
your creativity
LUXEON® Z
IN
Color and White LED Portfolio
AR
Y
Technical Datasheet DS105
Introduction
M
LUXEON® Z is a broad portfolio of Color and White LEDs that enable never before seen lumen
density, flexibility and freedom of design. Available in the full spectrum of colors from 440nm to
EL
I
670nm and select white color temperatures, LUXEON Z is ideal for entertainment/stage lighting,
indoor and outdoor architectural lighting, emergency vehicle lighting, remote phosphor applications
and a wide spectrum of specialty lighting applications.
PR
Features
• 2.2 mm2 micro footprint
• Un-encapsulated
• Tested and Binned at 500 mA
• Up to 1A max drive current
• Up to 150C max Tj
Benefits
• Industry’s leading Lm/mm2 for high flux density solution
• Highest degree of design flexibility
• Superior color mixing and beam control through choice of optics
• Enables customizable light sources: linear, rectangular, circular.
Table of Contents
General Product Information......................................................................................................................................3
Product Nomenclature...........................................................................................................................................3
Flux and Efficacy Performance Characteristics.......................................................................................................4
Flux Performance, Binning, and Supportability..................................................................................................5
Optical Characteristics.................................................................................................................................................6
Electrical Characteristics..............................................................................................................................................7
Absolute Maximum Ratings...................................................................................................................................8
JEDEC Moisture Sensitivity....................................................................................................................................8
Reflow Soldering Characteristics...............................................................................................................................9
Mechanical Dimensions: LUXEON Z Blue/Green/Royal-Blue and Cyan Emitters.......................................10
Mechanical Dimensions: LUXEON Z White Emitter..........................................................................................11
Mechanical Dimensions: LUXEON Z Red, Red-Orange, Amber and Deep Red Emitters..........................12
Pad Configuration........................................................................................................................................................13
Solder Pad Design..................................................................................................................................................13
Wavelength Characteristics.......................................................................................................................................14
Typical Light Output Characteristics over Temperature.....................................................................................15
Typical Forward Current Characterisics................................................................................................................16
Typical Relative Luminous Flux.................................................................................................................................17
Typical Radiation Patterns..........................................................................................................................................18
Emitter Pocket Tape Packaging..................................................................................................................................21
Emitter Reel Packaging...............................................................................................................................................23
Luminous Flux Bins......................................................................................................................................................24
Forward Voltage Bins...................................................................................................................................................25
Color Bins......................................................................................................................................................................26
LUXEON Z Datasheet DS105 20120516
2
General Product Information
Product Nomenclature
The part number designation for LUXEON Z - Color LEDs is explained as follows:
L X Z 1 -A B C D - E F G H
Where:
A — designates radiation pattern (value P for lambertian)
B — designates color (see LUXEON Z color binning and labeling section)
C — designates color variant (0 for color variants)
D — designates test current (value 1 for 350 mA; 2 for 700 mA.)
E — open slot to accommodate additional requirements per product and part number
FGH — minimum luminous flux (lm) or radiometric power (mW) performance
The part number designation for LUXEON Z - White LEDs is explained as follows
L X Z 1 -A B C D - E F G H
Where:
A — 1st digit of Color temperature (e.g. 4 for 4000K, 3 for 3000K)
B — 2nd digit of Color temperature (e.g.: 0 for 4000K, 0 for 3000K)
C — 1st digit of CRI (e.g.: 6 for 60 CRI, 8 for 85 CRI)
D — 2nd digit of CRI (e.g.: 0 for 60 CRI, 5 for 85 CRI)
E — open slot to accommodate additional requirements per product and part number
FGH — minimum luminous flux (lm)
LUXEON Z Datasheet DS105 20120516
3
Flux and Efficacy Performance Characteristics
Luminous Flux Characteristics for LUXEON Z Color Portfolio, Thermal Pad Temperature =25°C
Table 1.
Min Luminous
Typ Efficacy
Typ Luminous
Typ Efficacy
Flux (lm)
Typ
(lm/W) or
Flux (lm) or
(lm/W) or
Part
or Radiometric
Flux
WPE
Radiometric
WPE
Color
Number
Power (mW)
(lm/mw)
Power (mW)
Performance @ 500 mA
Performance @ 700 mA
Green
LXZ1-PM01-0104
LXZ1-PM01-0096
104
96
98
63
120
53
LXZ1-PM01-0088
88
92
59
113
50
LXZ1-PM01-0080
80
84
54
103
46
LXZ1-PM01-0072
72
76
49
93
41
LXZ1-PE01-0080
80
81
52
100
44
LXZ1-PE01-0072
72
70
45
86
38
LXZ1-PE01-0064
64
68
44
84
38
LXZ1-PE01-0056
56
60
39
74
33
LXZ1-PE01-0048
48
54
35
67
30
LXZ1-PB01-0048
48
50
34
65
30
LXZ1-PB01-0040
40
44
30
57
27
Blue
LXZ1-PB01-0032
32
38
26
49
23
LXZ1-PB01-0024
24
30
21
39
19
LXZ1-PR01-0600
600
620
43%
823
40%
LXZ1-PR01-0550
550
570
40%
757
37%
Royal-Blue
LXZ1-PR01-0500
500
530
37%
704
35%
LXZ1-PR01-0450
450
480
33%
637
31%
LXZ1-PA01-0350
350
360
34%
454
31%
Deep Red
LXZ1-PA01-0300
300
330
32%
416
29%
LXZ1-PA01-0250
250
280
26%
353
24%
LXZ1-PD01-0056
56
57
54
77
49
LXZ1-PD01-0048
48
52
50
70
46
Red
LXZ1-PD01-0040
40
44
42
60
38
LXZ1-PD01-0032
32
37
35
50
32
LXZ1-PH01-0064
64
66
63
90
58
Red-Orange LXZ1-PH01-0056
56
60
57
82
53
LXZ1-PH01-0048
48
54
51
73
47
LXZ1-PL01-0064
64
66
63
90
59
LXZ1-PL01-0056
56
60
57
82
53
Amber
LXZ1-PL01-0048
48
54
51
73
48
LXZ1-PL01-0040
40
46
44
63
41
Notes for Table 1:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a
tolerance of ± 6.5% on flux and power measurements.
2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions.
Cyan
LUXEON Z Datasheet DS105 20120516
4
Flux and Efficacy Performance Characteristics,
Continued
Luminous Flux Characteristics for LUXEON Z White, Thermal Pad Temperature =25°C
Table 2.
Min Luminous
Typ Efficacy
Typ Luminous
Typ Efficacy
Flux (lm)
Typ
(lm/W) or
Flux (lm) or
(lm/W) or
Part
or Radiometric
Flux
WPE
Radiometric
WPE
White
Number
Power (mW)
(lm/mw)
Power (mW)
Performance @ 500 mA
Performance @ 700 mA
4000K/
LXZ1-4070-0144
LXZ1-4070-0134
144
134
148
140
102
96
194
183
94
88
70 CRI
LXZ1-4070-0124
LXZ1-4070-0114
124
114
130
122
90
85
170
160
83
78
Flux Performance, Binning, and Supportability
Volume
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately
Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Philips Lumileds separates LEDs into
fixed, easy to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, please consult your
Philips Lumileds or Future Lighting Solutions sales representative.
Luminous Flux Bins
LUXEON Z Datasheet DS105 20120516
5
Optical Characteristics
LUXEON Z Color Portfolio at Test Current [1]
Thermal Pad Temperature = 25°C
Table 3.
Typical
[2]
Dominant Wavelength lD ,
Spectral
or Peak Wavelength [3] lP
Half-width[4]
(nm)
Color
Min.
Typ.
Max.
Dl1/2
Typical
Temperature
Coefficient of
Dominant or Peak
Wavelength
(nm/°C)
DlD/ DTJ
Typical
Total
Included
Angle [5]
(degrees)
u0.90V
Typical
Viewing
Angle [6]
(degrees)
2u 1/2
Green [7]
520.0 nm
530.0 nm
550.0 nm
[7]
Cyan
490.0 nm
505.0 nm
520.0 nm
Blue [7]
460.0 nm
470.0 nm
490.0 nm
Royal-Blue [3] [7]
440.0 nm
447.5 nm
460.0 nm
Red [8]
620.0 nm
627.0 nm
645.0 nm
Deep Red [8]
650.0 nm
655.0 nm
670.0 nm
Red-Orange [8]
610.0 nm
617.0 nm
620.0 nm
Amber [8]
584.5 nm
590.0 nm
597.0 nm
PC Amber [7]
588.0 nm
591.0 nm
592.0 nm
Notes for Table 3:
1. LXML-PR01-XXXX, LXM2-PL01-XXXX and LXM3-PD01-XXXX emitters are tested at 350 mA, LXML-PR02-XXXX emitters are tested
at 700 mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements.
3. Royal-blue and Deep Red LEDs are binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
4. Spectral width at ½ of the peak intensity.
5. Total angle at which 90% of total luminous flux is captured.
6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. PC amber, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN).
8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
LUXEON Z Datasheet DS105 20120516
6
Electrical Characteristics
Electrical Characteristics at 500 mA for LUXEON Z Colors,
Thermal Pad Temperature = 25ºC
Table 4.
Forward Voltage Vf [1]
Part
@ 500 mA (V)
Color
Number
Min.
Typ.
Max.
Green
Cyan
Blue
LXZ1-PM01
LXZ1-PE01
LXZ1-PB01
2.50
3.50
3.50
3.10
3.10
3.00
Forward
Voltage Vf
@ 700 mA
Typ.
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
DVf / DTJ
Typical Thermal
Resistance Junction to
Thermal Pad (°C/W)
Ru J-C
3.50
3.50
3.50
Royal-Blue
LXML-PR01
3.50
2.90
3.50
Red
LXZ1-PD01
1.75
2.15
2.75
Deep Red
LXZ1-PA01
1.75
2.15
2.75
Red-Orange
LXZ1-PH01
1.75
2.15
2.75
Amber
LXZ1-PL01
1.75
2.15
2.75
Notes for Table 4:
1. LUXEON Z royal-blue measured between 25°C = Tj = 110°C and If = 700 mA.
2. Measured between 25°C = TJ = 110°C at If = 350 mA.
3. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Electrical Characteristics at 500 mA for LUXEON Z White,
Thermal Pad Temperature = 25ºC
Table 5.
Forward Voltage Vf [1]
Part
@ 500 mA (V)
White
Number
Min.
Typ.
Max.
4000K/70CRI
LXZ1-4070
LUXEON Z Datasheet DS105 20120516
2.50
2.90
Forward
Voltage Vf
@ 700 mA
Typ.
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
DVf / DTJ
Typical Thermal
Resistance Junction to
Thermal Pad (°C/W)
Ru J-C
3.50
7
Absolute Maximum Ratings
Table 6.
Parameter
Green/Cyan/
Blue/Royal-Blue
Red/Deep-Red
Red-Orange/Amber
White
4000K
DC Forward Current (mA)
1000
700
700
Peak Pulsed Forward
1000
700
700
Current (mA)
ESD Sensitivity
JESD22-A114-B
LED Junction Temperature [1]
150°C
135°C
130°C
Operating Case Temperature
-40°C - 135°C
-40°C - 120°C
-40°C - 110°C
at 350 mA
Storage Temperature
-40°C - 135°C
-40°C - 135°C
-40°C - 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
3
Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vr)
LUXEON Rebel Color Portfolio LEDs are not designed to be driven in reverse bias.
Notes for Table 6:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. The maximum rating for LUXEON Z royal-blue is 1200 mA with peak pulsed forward current not to exceed 60 seconds.
JEDEC Moisture Sensitivity
Table 7.
Soak Requirements
Level Floor Life
Standard
Time Conditions
Time
Conditions(hours)
1
unlimited [ 30°C /
85% RH
LUXEON Z Datasheet DS105 20120516
168
+ 5 / -0
85°C / 85%
RH
8
Reflow Soldering Characteristics
JEDEC 020c
Table 8.
Profile Feature
Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp)
3°C / second max
Preheat Temperature Min (Tsmin)
150°C
Preheat Temperature Max (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 - 180 seconds
Temperature TL (tL)
217°C
Time Maintained Above Temperature TL (tL)
60 - 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
20 - 40 seconds
Ramp-Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Note for Table 8:
- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
LUXEON Z Datasheet DS105 20120516
9
Mechanical Dimensions: LUXEON Z Blue/Green/RoyalBlue and Cyan Emitters
Figure 1. Package outline drawing.
Notes for Figure 1:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
10
Mechanical Dimensions: LUXEON Z White Emitter
Figure 2. Package outline drawing.
Notes for Figure 2:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
11
Mechanical Dimensions: LUXEON Z Red, Red-Orange,
Amber and Deep Red Emitters
Figure 3. Package outline drawing.
Notes for Figure 3:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
12
Pad Configuration
Data coming soon.
Figure 4. Pad configuration.
Solder Pad Design
Data coming soon.
Figure 5. Solder pad layout.
LUXEON Z Datasheet DS105 20120516
13
Wavelength Characteristics
Green, Cyan, Blue, all Royal-Blue, Red, Red-Orange and Amber
at Test Current, Thermal Pad Temperature = 25°C
Relative Spectral Power
Distribution
1.0
0.8
0.6
Cyan
Royal
Blue
RedOrange
Green
Blue
Deep
Red
Amber
0.4
Red
0.2
0.0
400
450
500
550
600
650
700
Wavelength (nm)
Figure 6. Relative intensity vs. wavelength.
LUXEON Z Datasheet DS105 20120516
14
Typical Light Output Characteristics over Temperature
Relative
e Luminou
us/Radiant Flux
1.1
1.0
0.9
0.8
0.7
Green (LXZ1-PM01) Photometric
Cyan (LXZ1-PM01) Photometric
06
0.6
Blue (LXz1-PB01) Photometric
Royal Blue (LXZ1-PR01) Radiometric
0.5
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 7. Relative light output vs. thermal pad temperature for cyan, blue, green and royal-blue LUXEON Z at Test Current.
1.2
Rela
ative Luminous Flux
x
1.0
0.8
0.6
0.4
Amber (LXZ1-PL01)
Deep Red (LXZ1-PA01)
0.2
Red (LXZ1-PD01)
Red Orange (LXZ1-PH01)
00
0.0
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 8. Relative light output vs. thermal pad temperature for red, deep red, red-orange and amber LUXEON Z at Test Current.
1.1
Rela
ative Lumiinous Flux
x
1.0
0.9
0.8
0.7
0.6
06
White (LXZ1-4070)
0.5
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 9. Relative light output vs. thermal pad temperature for white LUXEON Z at Test Current.
LUXEON Z Datasheet DS105 20120516
15
Typical Forward Current Characterisics
1200
Royal Blue (LXZ1-PR01)
1000
Blue (LXZ1-PB01)
Forw
ward Curre
ent (mA)
Cyan (LXZ1-PE01)
800
Green (LXZ1-PM01)
600
400
200
0
1.8
2.3
2.8
3.3
3.8
Forward Voltage (V)
Figure 10. Forward current vs. forward voltage for green, cyan, blue and royal-blue LUXEON Z at Thermal Pad Temperature = 25ºC.
1200
Amber (LXZ1-PL01)
Deep Red (LXZ1-PA01)
1000
Forw
ward Currrent (mA)
Red (LXZ1-PD01)
Red Orange (LXZ1-PH01)
800
600
400
200
0
1.8
2
2.2
2.4
2.6
2.8
3
Forward Voltage (V)
Figure 11. Forward current vs. forward voltage for red, deep red, red-orange and amber LUXEON Z at Thermal Pad Temperature = 25ºC.
1200
White ((LXZ1-4070))
Forwa
ard Curren
nt (mA)
1000
800
600
400
200
0
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
Forward Voltage (V)
Figure 12. Forward current vs. forward voltage for white LUXEON Z at Thermal Pad Temperature = 25ºC.
LUXEON Z Datasheet DS105 20120516
16
Typical Relative Luminous Flux
2.0
Relative
e Luminou
us/Radian
nt Flux
1.8
1.6
14
1.4
1.2
1.0
0.8
Royal Blue (LZX1-PR01) Radiometric
0.6
Blue (LXZ1-PB01) Photometric
Cyan (LXZ1-PE01) Photometric
0.4
Green (LZX1-MP01) Photometric
0.2
0.0
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 13. Typical relative luminous flux vs. forward current for green, cyan, blue & royal-blue LUXEON Z at thermal pad temperature = 25ºC.
2.0
1.8
Relattive Lumin
nous Flux
1.6
1.4
1.2
1.0
0.8
0.6
Amber (LXZ1-PL01)
0.4
Deep Red (LXZ1-PA01)
(LXZ1 PA01)
Red (LXZ1-PD01)
0.2
00
0.0
Red Orange (LXZ1-PH01)
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 14. Typical relative luminous flux vs. forward current for red, deep red, red-orange & amber LUXEON Z at thermal pad temperature = 25ºC.
2.0
18
1.8
1.6
Relative
e Luminou
us Flux
1.4
1.2
1.0
0.8
0.6
0.4
White
te (LXZ1-4070)
(
0 0)
0.2
00
0.0
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 15. Typical relative luminous flux vs. forward current for white LUXEON Z at thermal pad temperature = 25ºC.
LUXEON Z Datasheet DS105 20120516
17
Typical Radiation Patterns
LUXEON Z Typical Spatial Radiation Pattern for Green, Cyan, Blue and
Royal-Blue
120%
100%
Relative
e Intensity
y (%)
80%
60%
40%
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
Green (LXZ1-PM01)
20%
0%
Royal Blue (LXZ1-PR01)
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 16. Typical spatial radiation pattern for green, cyan, blue and royal-blue LUXEON Z.
LUXEON Z Typical Polar Radiation Pattern for Green, Cyan, Blue and
Royal-Blue
0°
1
-30°
30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
Green (LXZ1-PM01)
Royal Blue (LXZ1-PR01)
-120°
120°
-150°
150°
180°
180
Figure 17. Typical polar radiation pattern for green, cyan, blue and royal-blue LUXEON Z.
LUXEON Z Datasheet DS105 20120516
18
LUXEON Z Typical Spatial Radiation Pattern for Red, Red-Orange and
Deep Red
120%
Rela
ative Inten
nsity (%)
100%
80%
60%
Red (LXZ1-PD01)
40%
Red Orange (LXZ1-PH01)
Deep Red (LXZ1-PA01)
20%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 18. Typical spatial radiation pattern for red, red-orange and deep red.
LUXEON Z Typical Polar Radiation Pattern for Red, Red-Orange and
Deep Red
0°
1
-30°
30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
-120°
Deep Red (LXZ1-PA01)
Red Orange (LXZ1-PH01)
120°
Red (LXZ1-PD01)
(LXZ1 PD01)
-150°
150°
180°
180
Figure 19. Typical polar radiation pattern for red, red-orange and deep red.
LUXEON Z Datasheet DS105 20120516
19
LUXEON Z Typical Spatial Radiation Pattern for Amber
120%
Relativ
ve Intensity (%)
100%
80%
60%
40%
Amber (LXZ1
(LXZ1-PL01)
PL01)
20%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 20. Typical spatial radiation pattern for deep red lambertian.
LUXEON Z Typical Polar Radiation Pattern for Amber
0°
1
-30°
30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
Amber (LXZ1-PL01)
-120°
120°
-150°
150°
180°
180
Figure 21. Typical polar radiation pattern for deep red lambertian.
LUXEON Z Datasheet DS105 20120516
20
Emitter Pocket Tape Packaging
Figure 22. Emitter pocket tape packaging for Blue, Green, Royal-Blue and Cyan.
LUXEON Z Datasheet DS105 20120516
21
Figure 23. Emitter pocket tape packaging for Red, Red-Orange, Amber and Deep Red.
LUXEON Z Datasheet DS105 20120516
22
Emitter Reel Packaging
Figure 24. Emitter reel packaging.
LUXEON Z Datasheet DS105 20120516
23
Luminous Flux Bins
Tables 9 and 10 list the standard photometric luminous flux/radiometric power bins for LUXEON Z colors and LUXEON Z white emitters (tested
and binned at 350 mA and 700 mA respectively). Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
Table 9.
Bin Code
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
LUXEON Z Flux Bins - All Colors and White
Minimum Flux (lm)
24
32
40
48
56
64
72
80
88
96
104
114
124
134
144
154
Maximum Flux (lm)
32
40
48
56
64
72
80
88
96
104
114
124
134
144
154
164
Table 10.
LUXEON Z Radiometric Power Bins for Royal-Blue and Deep Red
Bin Code
Minimum Radiometric Flux (mW)
Maximum Radiometric Flux (mW)
A
250
300
B
300
350
C
350
400
D
400
450
E
450
500
F
500
550
G
550
600
H
600
650
I
650
700
J
700
750
K
750
800
LUXEON Z Datasheet DS105 20120516
24
Forward Voltage Bins
The following forward voltage bins include the minimum and maximum Vf bin values for the emitter. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance.
Table 11. Voltage Bins
Vf Bins
Bin Code
1
2
3
4
5
6
7
LUXEON Z Datasheet DS105 20120516
Minimum Forward Voltage
(V)
Maximum Forward Voltage
(V)
1.75
2.00
2.25
2.50
2.75
3.00
3.25
2.00
2.25
2.50
2.75
3.00
3.25
3.50
25
Color Bins
Dominant Wavelength Bin Structure for LUXEON Z Green
Table 12.
Bin Code
1
2
3
4
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 520
525
530
535
525
530
535
540
Dominant Wavelength Bin Structure for LUXEON Z Cyan
Table 13.
Bin Code
1
2
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 490
498
498
508
Dominant Wavelength Bin Structure for LUXEON Z Blue
Table 14.
Bin Code
1
2
3
4
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 460
465
470
475
465
470
475
480
Dominant Wavelength Bin Structure for LUXEON Z Royal-Blue
Table 15.
Bin Code
3
4
5
6
Minimum PeakWavelength
(nm)
Maximum Peak Wavelength
(nm) 440
445
450
455
445
450
455
460
Dominant Wavelength Bin Structure for LUXEON Z Red
Table 16.
Bin Code
4
5
LUXEON Z Datasheet DS105 20120516
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 620
630
630
640
26
Dominant Wavelength Bin Structure for LUXEON Z Red-Orange
Table 17.
Bin Code
2
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 610
620
Dominant Wavelength Bin Structure for LUXEON Z Amber
Table 18.
Bin Code
1
2
4
6
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 584
587
590
592
587
590
592
595
Dominant Wavelength Bin Structure for LUXEON Z Deep Red
Table 19.
Bin Code
6
7
LUXEON Z Datasheet DS105 20120516
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 650
660
660
670
27
Company Information
Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output,
efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology
and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for
power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting,
shop lighting, home lighting, digital imaging, display and automotive lighting.
Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and
white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in
San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is
dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s
LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com.
www.philipslumileds.com
www.philipslumileds.cn.com
www.futurelightingsolutions.com
For technical assistance or the
location of your nearest sales
office contact any of the
following:
North America:
1 888 589 3662
[email protected]
©2012 Philips Lumileds Lighting Company. All rights reserved.
Product specifications are subject to change without notice.
LUXEON is a registered trademark of the Philips Lumileds
Lighting Company in the United States and other countries.
Europe:
00 800 443 88 873
[email protected]
Asia Pacific:
800 5864 5337
[email protected]
Japan:
800 5864 5337
[email protected]
Similar pages