LITEON LZ-B12HMSE-KHV-UC Power relay 1 pole - 1/3/5/10a medium load control lz sery Datasheet

FTR-K1 SERIES
POWER RELAY
1 POLE - 1/3/5/10A Medium Load Control
LZ Series
n FEATURES
l
l
l
l
l
l
l
l
UL, CSA, SEV recognized
Contact rating types - Low level to 10 amps switching
Standard and high sensitivity types available
High surge strength version available
UL class B (130°C) insulation type available (only plastic sealed type)
Printed circuit terminals - 0.1" grid pitch
Plastic sealed type, RTIII
RoHS compliant.
Please see page 9 for more information
n PARTNUMBER INFORMATION
[Example]
(a)
LZ
(a)
-
B 12 H M S E (b) (c) (d) (e) (f ) (g)
Relay type
(b)
Coil wire class
K HV - UC
(h) (i)
(j)
LZ
: LZ Series
Nil
B
: Standard type
: UL class B insulation type (130 °C) (c)
Coil rated voltage
12
(d)
Contact type
Nil
H
V
W
: 1.5....100VDC
Coil rating table at page 3
(e)
Contact configuration
Nil
M
: 1 form C (SPDT)
: 1 form A (SPST-NO)
(f)
Coil type
Nil
S
: Standard type (450-600mW)
: High sensitive type (300mW)
(g)
Contact material
Nil
Nil
Nil
E
: Gold overlay silver-palladium (1A) (only LZ-W)
: Gold overlay silver-nickel (3A, 5A)
: Silver alloy (10A) (only LZ-V) (contains cadmium)
: Silver-nickel (3A, 5A)
(h)
Enclosure
Nil
K
C
: Flux proof type, RTII
: Plastic sealed type (recommended for new designs) RTIII
: Plastic sealed type (with tape) RTIII
(i)
Surge strength
Nil
HV
: Standard type (4,000V)
: High surge strength type (6,000V)
UC
: UL, CSA approved type
(j)
Approvals
: 3A
: 5A
: 10A (standard coil power only)
: 1A (bifurcated contact)
1
FTR-K1
SERIES
LZ SERIES
n SPECIFICATION
LZ-( ) (Standard type)
Item
Contact
Data
Life
Coil Data
Timing Data
Insulation
5A Type
3A Type
1A Type
LZ - ( ) V
LZ - ( ) VM
LZ - ( ) H
LZ - ( ) HE
LZ - ( )
LZ - ( ) E
LZ- ( ) W
Configuration
1 form A (SPST-NO), 1 form C (SPDT)
Construction
Single
Single (crossbar)
Bifurcated (crossbar)
Material
Silver alloy
(contains
cadmium)
Gold overlay silver alloy
Silver alloy (LZ-HE, E)
Gold overlay
silverpalladium
Resistance (initial) (at 6 VDC, 1A)
Max. 100
mOhm
Max. 70 mOhm (LZ-H, LZ)
Max. 100 mOhm (LZ-HE, E)
Max. 50 mOhm
Contact rating (resistive)
10A, 120VAC/
24VDC
1/4HP,
120VAC
5A, 120VAC/
24VDC
1/8 HP,
120VAC
Max. carrying current
10A
5A
Max. switching voltage
250VAC, 150 VDC
Max. switching power
1,680VA,
240W
960VA, 120W
600VA, 90W 190VA, 30W
Max. switching current
10A
5A
3A
Min. switching load *
100mA 5VDC
10mA,
10mA, 5VDC
5VDC(LZ-)
(LZ-H)
100mA,
100mA, 5VDC
5VDC (LZ(LZ-HE)
E)
Mechanical
Min. 20 x 106 operations
Electrical
Min. 100 x 103 operations (contact rating)
Rated Power (at 20 °C)
450 - 600mW
Operate Power (at 20 °C)
170 - 220 mW (LZ- ( ) V : 290 - 390 mW)
Operating temperature range
-30 °C to +70 °C (no frost)
Operate (at nominal voltage)
Max. 7 ms (without bounce)
Release (at nominal voltage)
Max. 4 ms (no diode)
Resistance (initial)
Min. 250MOhm at 500VDC
Dielectric strength
Surge strength
Other
10A Type
Vibration resistance
Shock
Weight
3A,120VAC/
24VDC
1A, 120VAC /
1/10HP,
30VDC
120VAC
1A
1A
0.1mA, 100mVDC
Open contacts
750VAC, 1min
Contacts to coil
2,000VAC, 1min
Coil to contacts
4,000V / High surge: 6,000V, 1.2 x 50µs standard wave
Misoperation
10 to 55Hz double amplitude 3.3 mm
Endurance
10 to 55Hz double amplitude 3.3 mm
Misoperation
Min. 100m/s² (11 ± 1ms)
Endurance
Min. 1,000m/s² (6 ± 1ms)
Approximately 7.7g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
2
FTR-K1
SERIES
LZ SERIES
n SPECIFICATION
LZ-( ) S (High sensitive type)
Item
Contact
Data
Coil Data
Timing Data
Insulation
1A Type
LZ-( )S, LZ-( )SE
LZ-( )WS
1 form A (SPST-NO), 1 form C (SPDT)
Construction
Single (crossbar)
Material
Gold overlay silver
nickel
Resistance (initial) (at 6VDC, 1A)
Max. 70mOhm (LZ-HS, S)
Max. 100mOhm (LZ-HSE, SE)
Bifurcated (crossbar)
Silver nickel (LZHSE, SE)
Gold overlay silverpalladium
Max. 50mOhm
Resistive
5A, 120VAC / 24VDC 3A, 120VAC / 30VDC 1A, 120VAC / 30VDC
Motor load
1/8 HP, 120VAC
1/10 HP, 120VAC
-
Max. carrying current
5A
Max. switching voltage
250VAC, 150 VDC
Max. switching power
960VA, 120W
600VA, 90W
190VA, 30W
Max. switching current
5A
3A
1A
Min. switching load *
10 mA, 5VDC (LZ-HS, S)
100 mA, 5VDC (LZ-HSE, SE)
Mechanical
Min. 20 x 106 operations
Electrical
Min. 100 x 103 operations
Rated power (at 20 °C)
330 mW
Operate power (at 20 °C)
140 mW
Operating temperature range
-30 °C to +80 °C (no frost)
Operate (at nominal voltage)
Max. 7 ms
Release (at nominal voltage)
Max. 4 ms
Resistance (initial)
Min. 250MOhm at 500VDC
Dielectric strength
Surge strength
Other
3A Type
LZ-( )HS, LZ -( )HSE
Configuration
Contact rating
Life
5A Type
Vibration resistance
Shock
Weight
1A
0.1 mA, 100mVDC
Open contacts
750VAC, 1min
Contacts to coil
2,000VAC, 1min
Coil to contacts
4,000V / -HV type: 6,000V, 1.2 x 50µs standard wave
Misoperation
10 to 55Hz double amplitude 3.3 mm
Endurance
10 to 55Hz double amplitude 3.3 mm
Misoperation
Min. 100m/s² (11 ± 1ms)
Endurance
Min. 1,000m/s² (6 ± 1ms)
Approximately 7.7 g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
3
LZ SERIES
FTR-K1
SERIES
n COIL RATING
Standard type (450 mW)
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate Voltage
(VDC) *
LZ-(B) ( ) VM
LZ-(B) ( ) (M) (E)
LZ-(B) ( ) W (M)
LZ-(B) ( ) V
Must ReleaseVoltage
(VDC) *
Rated
Power
(mW)
1.5
1.5
5
0.97
1.2
0.08
3
3
20
1.95
2.4
0.15
5
5
56
3.25
4
0.25
6
6
80
3.9
4.8
0.3
9
9
180
5.85
7.2
0.45
12
12
320
7.8
9.6
0.6
18
18
720
11.7
14.4
0.9
24
24
1,280
15.6
19.2
1.2
48
48
3,800
28.8
38.4
2.4
600
100
100
22,200
65
80
5
450
450
High sensitive type (330 mW)
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *¹
Must ReleaseVoltage
(VDC) *¹
1.5
1.5
6.8
0.97
0.08
3
3
27
1.95
0.15
5
5
80
3.25
0.25
6
6
110
3.9
0.3
9
9
250
5.85
0.45
12
12
440
7.8
0.6
18
18
990
11.7
0.9
24
24
1,780
15.6
1.2
Rated Power
(mW)
330
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
4
FTR-K1
SERIES
LZ SERIES
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508
Flammability: UL 94-V0 (plastics)
E 56149, E 45026
CSA
C22.2 No. 14
LR 35579
[LZ-( )W, LZ-( )WS]
0.8A, 240VDC (resistive)
1A, 120VAC / 30VDC (resistive)
[LZ-( ), LZ-( )S]
2.5A, 240 VDC (resistive)
3A, 120 VAC / 30VDC (resistive)
1/10 HP, 120VAC/2400VAC
Pilot duty: D150
[LZ-( ), LZ-( )S]
2.5A, 240 VAC (resistive)
3A, 120 VAC / 30VDC (resistive)
1/10 HP, 120VAC/2400VAC
Pilot duty: D150
[LZ-( )V]
7A, 240 VDC (resistive)
10A, 120 VAC / 30VDC (resistive)
1/4 HP, 120VAC/2400VAC
Also complies with SEV.
5
FTR-K1
SERIES
JV
LZ SERIES
n CHARACTERISTIC DATA
6
FTR-K1
SERIES
LZ SERIES
SERIES
JV
n REFERENCE DATA
7
FTR-K1
SERIES
LZ SERIES
n DIMENSIONS
l Dimensions
l Schematics
(BOTTOM VIEW)
LZ-M type (Flux proof type)
l PC board mounting
hole layout
(BOTTOM VIEW)
LZ-M-K, LZ-M-C type (Plastic sealed type or sealed with tape)
LZ type (Flux proof type)
LZ-K, LZ-C type (Plastic sealed type or sealed with tape)
8
FTR-K1
SERIES
JV
LZSERIES
SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
9
FTR-K1
SERIES
JV
LZSERIES
SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. August 6, 2010
10
Similar pages