NKK M2123TCFW01 Led tipped toggle Datasheet

A
Electrical Capacity (Resistive Load)
Power Level (silver):
Logic Level (gold):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Bushing:
Housing:
Mounting Bracket:
Movable Contacts:
Stationary Contacts:
Lamp Contacts:
Base:
Switch Terminals:
Lamp Terminals:
Slides
Tactiles
Tilt
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Accessories
Indicators
Touch
Installation
Supplement
LED Tipped Toggles
General Specifications
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series M2100
Mounting Torque:
Soldering Time & Temp:
Cleaning:
Standards & Certifications
Flammability Standards:
UL:
CSA:
A76
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum
On-to-On Position
Off-to-On Position
Single Pole
3.19N
3.92N
Double Pole
4.41N
7.06N
20°
Brass with nickel plating
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
1.47Nm (13 lb•in) for double nut; .67Nm (6 lb•in) for single nut
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
File No. E44145
Single pole with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC
Add “/U” to end of part number to order UL mark on switch.
File No. 023535_0_000
All single pole with synchronous circuits certified at 6A @ 125V AC
Add “/C” to end of part number to order CSA mark on switch.
www.nkk.com
A
Rockers
Distinctive Characteristics
Toggles
Series M2100
LED Tipped Toggles
Pushbuttons
Industry’s first LED illumination at tip of toggle switches.
Programmable Illuminated PB
Single color LEDs of red, yellow, and green, plus bicolor red/green,
to meet varied design requirements.
LEDs can operate independently from or synchronously with
switching operation.
Antijamming feature to protect contacts from damage due
to excessive downward force on the toggle.
Keylocks
High torque bushing prevents the bushing from rotating
or separating from the metal frame during installation.
Rotaries
Stainless steel frame resists corrosion.
Slides
Silver contacts are of specially composed alloy for
hardness.
High insulating barriers protect against crossover
in double pole devices.
Tactiles
Terminals are molded in and epoxy sealed to lock
out flux, dust, and other contaminants.
Tilt
1,500V dielectric strength between switch contacts
and case is accomplished by clinching the frame
away from the terminals.
Supplement
Accessories
Indicators
Touch
Actual Size
www.nkk.com
A77
A
LED Tipped Toggles
TYPICAL SWITCH ORDERING EXAMPLE
M21
Pushbuttons
Rockers
Toggles
Series M2100
1
2
Programmable Illuminated PB
Poles
1
SPDT
*2
DPDT
T
L
Isolated
T
Synchronous
Circuits
W
Contact Materials
& Ratings
LED Circuits &
Actuator Types
* Available only with
Terminals 01, 02, 03
Keylocks
C
W
Silver; Rated
6A @ 125V AC
G
Gold; Rated 0.4VA max
@ 28V AC/DC max
LED Colors
2
ON
NONE
ON
3
ON
OFF
ON
Single Color
Rotaries
Slides
/M
1/4–40 Thread
(Inch)
6mm Thread
(Metric)
Terminals & Mounting Types
01
Solder Lug with Threaded Bushing*
02
Quick Connect with Threaded Bushing
E
Yellow
03
Straight PC with Threaded Bushing
F
Green
30
Right Angle PC with Smooth Bushing
(available with gold contacts only)
Red/Green
*Wire harness & cable assemblies
offered only in Americas
IMPORTANT:
Tilt
Tactiles
Switches are supplied without UL
& CSA marking unless specified.
Specific models & ratings noted
on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
M2112TCW01
Red LED
Synchronous LED Circuit
in Actuator
Indicators
No
Code
Red
CF
SPDT
ON-NONE-ON
Switch Circuit
Accessories
Threaded Bushings
C
Bicolor
1/4–40 Threaded Bushing
Silver Contacts with
6-Amp Rating
Solder Lug Terminals
Supplement
A78
01
www.nkk.com
A
POLES & CIRCUITS & LED ILLUMINATION
Toggle Position & Terminal Numbers
NONE
NONE
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
NONE
NONE
Green
5-4
ON
2-3
OFF
OPEN
ON
2-1
Isolated LEDs (see schematics)
Connected LED Terminals
ON
4-6
ON
4-6
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
OFF
OPEN
ON
4-6
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
OFF
OPEN
Green
5-4
ON
2-3 5-6
NONE
NONE
ON
2-1 5-4
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
NONE
NONE
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
NONE
NONE
Green
8-7
ON
2-3 5-6
OFF
OPEN
ON
2-1 5-4
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
ON
7-9
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
OPEN
OFF
ON
7-9
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
OFF
OPEN
Green
8-7
LED Circuit
M2113
SPDT
LED Circuit
Connected Power Terminals
M2122
DPDT
LED Circuit
Connected Power Terminals
M2123
DPDT
LED Circuit
Connected Power Terminals
Isolated
Single Color
LED
Rockers
ON
4-6
SPDT
2 (COM)
L(+)
3
1
Pushbuttons
Isolated LEDs (see schematics)
Connected LED Terminals
M2112
Connected Power Terminals
L(-)
4
6
2 (COM)
Isolated
Bicolor LED
Red
Green
3
1
Programmable Illuminated PB
ON
2-1
Pole & Throw
(+) Red
6 ( ) Green
4 COM
2 (COM)
Synchronous
Single Color
LED
L(+)
3
1
L(-)
4
6
2 (COM)
Red
Synchronous
Bicolor LED
Green
3
1
6
5 COM (+)
Keylocks
NONE
NONE
Model
4
External Connection
Isolated
Single Color
LED
2 (COM)
5
L(+)
3
1
Isolated
Bicolor LED
6
4
2 (COM)
3
Synchronous
Single Color
LED
Synchronous
Bicolor LED
9
5
1
Red
Green
6
2 (COM)
3
L(-)
7
Rotaries
ON
2-3
Notes: Terminal numbers are not actually on the switch.
LEDs require an external power source.
4
(+) Red
9 ( ) Green
7 COM
Slides
Up
5
1
6
4
2 (COM)
7
L(+)
9
5
L(-)
Tactiles
Center
Keyway
Red
Green
3
1
6
4
9
8 COM (+)
7
External Connection
Tilt
Down
Schematics
Toggles
Series M2100
LED Tipped Toggles
LED COLORS & SPECIFICATIONS
E
F
CF
Color
Red
Yellow
Green
Red/Green
Forward Peak Current
I FM
25
30
30
25
Continuous Forward Current
IF
20
20
20
10
Forward Voltage
VF
2.1
2.1
2.1
1.9
Reverse Peak Voltage
VRM
4
4
4
–––
Current Reduction Rate Above 25°C
∆I F
0.33
0.40
0.40
0.33/0.33
Ambient Temperature Range
Indicators
C
Bicolor LED is translucent white when unlit.
Accessories
Not available separately
Bicolor
Supplement
Single Color
LED factory assembled
Touch
Single Element LED
–10° ~ +55°C
www.nkk.com
A79
A
L
Pushbuttons
T
Standard Hardware: 2 AT513H Hex
Nuts, 1 AT507H Locking Ring, 1 AT509
Lockwasher Standard & optional
hardware details in Accessories &
Hardware section.
Threaded Bushing
combines with Terminal
codes 01, 02, & 03.
Solder Lug
Smooth Bushing
combines with
Terminal code 30.
(6.5) Dia
.256
(2.2) Dia
.087
(5.6)
.220
(6.5)
.256
(6.5) Dia
.256
(0.6)
.024
Single Pole
Keyway
(4.8)
.189
1/4-40 Thd
20°
Rotaries
(2.5) Dia
.098
(5.0) Dia
.197
(12.7)
.500
(4.7) Typ
.185
(14.7)
.579
Solder Lug
(8.0)
.315
(0.9)
.035
(20.3)
.799
(6.35)
.250
(1.17) Typ
.046
Keyway
(4.8)
.189
1/4-40 Thd
20°
(2.5) Dia
.098
(5.0) Dia
.197
(17.5)
.689
(8.0)
.315
(0.9)
.035
4
1
(13.0)
.512
(2.0) Typ
.079
(4.8)
.189
(20.3)
.799
9
6
3
8
5
2
7
4
1
(13.0)
.512
(2.0) Typ
.079
(4.8) Typ
.189
(1.17) Typ
.046
(6.35)
.250
Single Pole Only
(2.5) Dia
.098
Indicators
(6.2) Dia
.244
(5.0) Dia
.197
Accessories
2
Single color LED switch does not have terminal 8.
Keyway
(2.9)
.114
(1.4)
.055
A80
3
5
(0.8) Typ
.031
(4.7) Typ
.185
(14.7)
.579
Right Angle PC
M2112TCFG30
6
Double Pole
(6.35)
.250
Tilt
(0.8) Typ
.031
Single color LED switch does not have terminal 5.
Tactiles
Slides
(6.2) Dia
.244
1/4-40 Thd
TYPICAL SWITCH DIMENSIONS
M2122TCFW01
Touch
(14.7)
.579
(14.7)
.579
Max. Panel
Thickness without
Locking Ring
.134” (3.4mm)
Finish: Brushed aluminum
M2112TCFW01
Supplement
(5.0) Dia
.197
(5.0) Dia
.197
Toggle with Synchronous LED Circuit
Max. Panel
Thickness with
Standard Hardware
.102” (2.6mm)
20°
20°
Toggle with Isolated LED Circuit
Keylocks
Programmable Illuminated PB
LED Tipped Toggles
LED CIRCUIT, TOGGLE, & MOUNTING TYPE COMBINATIONS
Rockers
Toggles
Series M2100
4
5
6
1
2
3
(12.7)
.500
(4.3)
.169
(5.1)
.201
(13.0)
.512
(14.7)
.579
(7.6)
.299
(0.4)
.016
(1.1)
.043
Single color LED switch does not have terminal 5.
www.nkk.com
(16.4)
.646
(1.27) Typ
.050
(3.81)
.150
(0.8) Typ
.031
(4.7) Typ
.185
Gold contact material only
A
CONTACT MATERIALS & RATINGS
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Pushbuttons
Rockers
W
Complete explanation of operating range in Supplement section.
02
(2.0)
.079
(4.0)
.157
(6.35) (4.8)
.250 .189
Quick Connect
(6.35) (4.8)
.250 .189
(2.0)
.079
(1.1)
.043
(1.17)
.046
(4.8)
.189
Thk = (0.8) Typ
.031
(4.8)
.189
Thk = (0.8) Typ
.031
03
Straight PC with
Turret LED Terminal
Single Pole
(4.8)
.189
3
(6.35) (4.8)
.250 .189
Epoxy Seal
(1.17) Typ
.046
(4.8)
.189
Thk = (0.8) Typ
.031
2
1
Double Pole
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
6
5
Epoxy Seal
(1.57) Typ
.062
Keylocks
Epoxy Seal
(4.7) Typ
.185
4
3
6
9
2
5
8
1
4
7
(4.8) Typ
.189
(4.7) Typ
.185
Single color LED
& isolated bicolor
LED switches do not
have terminal 8.
Rotaries
Solder Lug with
Turret LED Terminal
Programmable Illuminated PB
TERMINALS
01
(1.8) Dia Typ
.073
(1.8) Dia Typ
.073
Slides
Single Pole
(4.7) Typ
.185
Right Angle PC
6
5
4
3
2
1
(3.81)
.150
(16.4)
.646
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
Tactiles
30
Toggles
Series M2100
LED Tipped Toggles
Tilt
(1.8) Dia Typ
.073
(2.54) Typ
.100
(6.35) Dia
.250
(12.0) Dia
.472
(2.0)
.079
(6.4) Dia (10.2) Dia
.252
.402
Accessories
1/4-40 Thd
(8.0)
.315
AT509
Lockwasher (1 per switch)
Material: Steel with chromate over zinc
(5.5) or
.229
(9.0)
.354
(1.5)
.059
(1.7)
.067
(0.8)
.031
(0.5)
.020
Optional Hardware: Knurled nuts, dress nuts, and ON-OFF plates are available; see details in Accessories & Hardware section.
www.nkk.com
Indicators
AT507H
Locking Ring (1 per switch)
Material: Steel with chromate over zinc
A81
Supplement
AT513H
Hexagon Nuts (2 per switch)
Material: Brass with nickel plating
Touch
STANDARD MOUNTING HARDWARE
Series M2100
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
General Specifications
B
Electrical Capacity (Resistive Load)
Power Level (silver):
Logic Level (gold):
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance:
10 milliohms maximum for silver; 20 milliohms maximum for gold
Insulation Resistance:
1,000 megohms minimum @ 500V DC
Dielectric Strength:
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
Mechanical Life:
50,000 operations minimum
Electrical Life:
25,000 operations minimum
Nominal Operating Force:
On-to-On Position
Off-to-On Position
Paddles
Single Pole
3.19N
3.92N
Double Pole
4.41N
7.06N
Rockers
Single Pole
6.37N
9.80N
Double Pole
13.73N
17.65N
Angle of Throw:
20°
Materials & Finishes
Housing:
Mounting Bracket:
Movable Contacts:
Stationary Contacts:
Lamp Contacts:
Base:
Switch Terminals:
Lamp Terminals:
Slides
Tactiles
Tilt
Touch
Indicators
Accessories
Supplement
LED Tipped Rockers & Paddles
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Installation
Soldering Time & Temp:
Cleaning:
Standards & Certifications
Flammability Standards:
UL:
CSA:
B92
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F) for rockers
–25°C through +70°C (–13°F through +158°F) for paddles
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
File No. E44145
Single pole rockers with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC.
Add “/U” to end of part number to order UL mark on switch.
File No. 023535_0_000
All single pole rockers with synchronous circuits certified at 6A @ 125V AC.
Add “/C” to end of part number to order CSA mark on switch.
www.nkk.com
TYPICAL SWITCH ORDERING EXAMPLE
N
Poles
1
SPDT
*2
DPDT
CF
W
LED Colors
* Available only with Rockers
with Terminals 01, 02, 03
Red
E
Yellow
F
Green
B
Contact Materials
& Ratings
Single Color
C
01
Pushbuttons
2
W
Silver; Rated
6A @ 125V AC
G
Gold; Rated 0.4VA max
@ 28V AC/DC max
Programmable Illuminated PB
1
Bicolor
OFF
ON
LED Circuits &
Actuator Types
Rocker
Terminals &
Mounting Types
01
Solder Lug with Flat Frame*
R
Isolated
02
Quick Connect with Flat Frame
N
Synchronous
03
Straight PC with Flat Frame
13
Straight PC with Bracket Mount
01
Solder Lug with Snap-in Frame*
Paddle
P
Isolated
02
Quick Connect with Snap-in Frame
J
Synchronous
03
Straight PC with Snap-in Frame
13
Straight PC with Bracket Mount
IMPORTANT:
* Wire harness & cable assemblies offered only in Americas
Optional Bezel
& Colors
For Snap-in Frame
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
Touch
Switches are supplied without UL
& CSA marking unless specified.
Specific models & ratings noted
on General Specifications page.
Keylocks
ON
Rotaries
3
Tactiles
ON
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
M2112NCFW01
Indicators
NONE
Red/Green LED
SPDT
ON-NONE-ON
Switch Circuit
Silver Contacts with
6-Amp Rating
Synchronous LED Circuit
in Rocker Actuator
Accessories
ON
Supplement
2
Red/Green
Tilt
CF
Circuits
Slides
M21
Rockers
Toggles
Series M2100
LED Tipped Rockers & Paddles
Solder Lug Terminals
www.nkk.com
B93
Toggle Position & Terminal Numbers
B
Down
Center
Up
ON
2-3
NONE
NONE
ON
2-1
Isolated LEDs (see schematics)
Connected LED Terminals
ON
4-6
NONE
NONE
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
NONE
NONE
Green
5-4
ON
2-3
OFF
OPEN
ON
2-1
Isolated LEDs (see schematics)
Connected LED Terminals
ON
4-6
ON
4-6
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
OFF
OPEN
ON
4-6
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
OFF
OPEN
Green
5-4
ON
2-3 5-6
NONE
NONE
ON
2-1 5-4
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
NONE
NONE
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
NONE
NONE
Green
8-7
ON
2-3 5-6
OFF
OPEN
ON
2-1 5-4
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
ON
7-9
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
OPEN
OFF
ON
7-9
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
OFF
OPEN
Green
8-7
Model
Pole & Throw
M2112
SPDT
LED Circuit
Connected Power Terminals
M2113
SPDT
Connected Power Terminals
M2122
DPDT
LED Circuit
Slides
Rotaries
Connected Power Terminals
M2123
DPDT
Tilt
LED Circuit
Connected Power Terminals
Tactiles
LED Tipped Rockers & Paddles
POLES & CIRCUITS & LED ILLUMINATION
LED Circuit
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series M2100
Schematics
Notes: Terminal numbers are not actually on the switch.
LEDs require an external power source.
Isolated
Single Color
LED
2 (COM)
L(+)
3
1
L(-)
4
6
2 (COM)
Isolated
Bicolor LED
Red
Green
3
1
(+) Red
6 ( ) Green
4 COM
2 (COM)
Synchronous
Single Color
LED
L(+)
3
1
L(-)
4
6
2 (COM)
Red
Synchronous
Bicolor LED
Green
3
1
6
5 COM (+)
4
External Connection
Isolated
Single Color
LED
2 (COM)
5
L(+)
3
1
Isolated
Bicolor LED
6
4
2 (COM)
3
Synchronous
Single Color
LED
Red
Green
6
2 (COM)
Synchronous
Bicolor LED
9
5
1
3
L(-)
7
4
(+) Red
9 ( ) Green
7 COM
5
1
6
4
2 (COM)
7
L(+)
9
5
L(-)
Red
Green
3
1
6
4
9
8 COM (+)
7
External Connection
LED COLORS & SPECIFICATIONS
Single Color
C
Color
Red
E
Paddles
Bicolor
F
CF
Yellow Green Red/Green
Single Color
C
Red
E
Bicolor
F
CF
Yellow Green Red/Green
Units
Forward Peak Current
I FM
25
30
30
25
10
30
30
30/25
mA
Accessories
LED factory assembled
Not available separately
Bicolor LED is translucent
white when unlit.
Rockers
Continuous Forward Current
IF
20
20
20
20
8
24
24
20/20
mA
Forward Voltage
VF
2.1
2.1
2.1
2.1
1.9
2.0
2.1
2.0/2.2
V
Reverse Peak Voltage
VRM
4
4
4
–––
5
5
5
–––
V
Supplement
Indicators
Touch
Single Element LED
Current Reduction Rate Above 25°C
∆I F
0.33
0.40
0.40
0.33/0.33
0.13
0.40
0.40
0.43/0.38
mA/°C
Ambient Temperature Range
B94
–10° ~ +55°C
www.nkk.com
–25° ~ +70°C
LED CIRCUIT, ROCKER, & MOUNTING TYPE COMBINATIONS
N
Rocker with
Synchronous LED Circuit
(16.8)
.661
(13.5)
.531
20°
(12.0)
.472
(9.8)
.386
Material: Polyamide
Finish: Matte
B
(12.0)
.472
(9.8)
.386
(17.8)
.701
(23.8)
.937
(3.5)
.138
(3.5)
.138
(0.6)
.024
Color: Black
Maximum Panel Thickness
.126” (3.2mm)
(16.8)
.661
(13.5)
.531
20°
Pushbuttons
Rocker with
Isolated LED Circuit
Bracket combines with
Terminal code 13.
Flat Frame combines with
Terminal codes 01, 02, & 03.
(10.1)
.398
(2.6) Dia Typ
.102
TYPICAL ROCKER SWITCH DIMENSIONS
Single Pole
(12.0)
.472
(4.8)
.189
(23.8)
.937
20°
(29.5)
1.161
Solder Lug
(0.6)
.024
(0.8) Typ
.031
(4.7) Typ
.185
6
3
5
2
4
1
Keylocks
(2.4) Dia Typ
.094
Programmable Illuminated PB
R
Rockers
Toggles
Series M2100
LED Tipped Rockers & Paddles
(13.0)
.512
(3.5)
.138
(9.8)
.386
(20.3)
.799
(1.17) Typ
.046
(6.35)
.250
(2.0) Typ
.079
(4.8)
.189
(12.7)
.500
M2112NCFW01
Single color LED switch does not have terminal 5.
Double Pole
(2.4) Dia Typ
.094
(12.0)
.472
(0.6)
.024
(4.8)
.189
(23.8)
.937
20°
(0.8) Typ
.031
(4.7) Typ
.185
9
6
3
8
5
2
7
4
1
(13.0)
.512
Tilt
(29.5)
1.161
Solder Lug
Tactiles
(6.35)
.250
Slides
(6.9)
.272
(9.3)
.366
Rotaries
(2.5) Dia
.098
(2.5) Dia
.098
M2122NCFW01
Single color LED switch does not have terminal 8.
Single Pole Only
(2.5) Dia
.098
(9.3)
.366
(9.8)
.386
(3.5)
.138
(20.3)
.799
(6.35)
.250
(0.5) Typ
.020
(1.17) Typ
.046
(3.2) Typ
.126
6
3
5
2
4
1
(4.8)
.189
(12.7)
.500
(17.8)
.701
(13.0)
.512
(1.17) Typ
.046
Direction of Actuation
(0.8) Typ
.031
(4.7) Typ (15.8)
.622
.185
20°
Straight PC • Bracket
(9.0)
.354
(4.5)
.177
(12.0)
.472
Touch
(17.5)
.689
(10.1)
.398
Single color LED switch does not have terminal 5. Silver contact material is standard.
www.nkk.com
Indicators
(20.3)
.799
(2.0) Typ
.079
(4.8) Typ
.189
(1.17) Typ
.046
(6.35)
.250
Accessories
(9.8)
.386
(3.5)
.138
Supplement
(6.9)
.272
(9.3)
.366
M2112NCFW13
B95
Programmable Illuminated PB
LED Tipped Rockers & Paddles
LED CIRCUIT, PADDLE, & MOUNTING TYPE COMBINATIONS
P
B
J
Pushbuttons
Rockers
Toggles
Series M2100
Paddle with Isolated LED Circuit
Maximum Panel Thickness
.039” ~ .126” (1.0 ~ 3.2mm)
without Bezel
.039” ~ .098” (1.0 ~ 2.5mm)
with Bezel
Paddle with Synchronous LED Circuit
(3.2)
.126
Material: Polyamide
(13.7)
.539
Finish: Matte
Color: Black
Maximum
Panel
Thickness
.126” (3.2mm)
20°
(3.2)
.126
(4.5)
.177
(15.9)
.626
(5.9) R
.232
(0.5)
.020
(7.1)
.280
(20.1)
.791
Keylocks
(12.7)
.500
(5.9) R
.232
(12.4)
.490
(3.5)
.138
Bracket combines with Terminal code 13
TYPICAL PADDLE SWITCH DIMENSIONS
Solder Lug • Snap-in
Single Pole Only
(4.8)
.189
(0.5)
.020
Slides
Rotaries
(4.5)
.177
(13.1)
.516
(2.8)
.110
Snap-in combines with Terminal codes 01, 02, & 03
(18.0)
.709
20°
(2.0)
.079
(5.0)
.197
(11.5)
.453
(12.2)
.480
Tactiles
Tilt
20°
M2112JCFW01
(3.2)
.126
(0.8) Typ
.031
6
(4.7) Typ
.185
(2.8)
.110
(13.7)
.539
(7.1)
.280
(26.5)
1.043
(1.17) Typ
.046
(6.35)
.250
3
5
2
4
1
(13.0)
.512
(2.0) Typ
.079
(4.8)
.189
(12.7)
.500
Single color LED switch does not have terminal 5.
Single Pole Only
Touch
Straight PC • Bracket
(9.0)
.354
Indicators
(4.5)
.177
20°
(2.0)
.079
(5.0)
.197
(9.0)
.354
(11.5)
.453
Accessories
Supplement
(0.8) Typ
.031
(4.7) Typ (15.8)
.622
.185
M2112JCFW13
B96
(3.2)
.126
(20.1)
.791
(6.35)
.250
(3.5)
.138
(0.5) Typ
.020
(20.2)
.795
Silver contact material is standard. Single color LED switch does not have terminal 5.
www.nkk.com
(1.17) Typ
.046
(3.2) Typ
.126
6
3
5
2
4
1
(4.8)
.189
(12.7)
.500
(13.0)
.512
(1.17) Typ
.046
Series M2100
CONTACT MATERIALS & RATINGS
Power Level
6A @ 125V AC & 3A @ 250V AC
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
B
Pushbuttons
G
Silver over Silver
Complete explanation of operating range in Supplement section.
02
(2.0)
.079
(4.0)
.157
Epoxy Seal
(6.35) (4.8)
.250 .189
Quick Connect
(6.35) (4.8)
.250 .189
(2.0)
.079
(1.1)
.043
(1.17)
.046
(4.8)
.189
Thk = (0.8) Typ
.031
Straight PC with
Turret LED Terminal
Single Pole
(4.8)
.189
Epoxy Seal
(1.17) Typ
.046
(4.8)
.189
Thk = (0.8) Typ
.031
6
2
5
1
4
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
(4.7) Typ
.185
3
6
9
2
5
8
1
4
7
(4.8) Typ
.189
(4.7) Typ
.185
Single color LED
& isolated bicolor
LED switches do not
have terminal 8.
(1.8) Dia Typ
.073
(1.8) Dia Typ
.073
Single Pole
Straight PC with Bracket
& Turret LED Terminal
Tactiles
13
3
Double Pole
(1.6) Typ
.063
(2.4) Typ
.095
3
6
2
5
1
4
CL
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
(7.9) Typ
.311
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
Touch
(6.35) (4.8)
.250 .189
Keylocks
(4.8)
.189
Thk = (0.8) Typ
.031
03
Epoxy Seal
(1.57) Typ
.062
Slides
Solder Lug with
Turret LED Terminal
Tilt
01
Programmable Illuminated PB
TERMINALS
AT2107 Bezel for Snap-in Panel Frame
(11.8)
.465
Finish: Matte
(12.0)
.472
(15.6)
.614
Black
B
White
(13.1)
.516
(21.5)
.846
C
Red
E
Accessories
(15.9)
.626
(2.2)
.087
Yellow
www.nkk.com
F
Green
G
Blue
H
Supplement
Material: Polyamide
A
Indicators
OPTIONAL BEZEL & COLORS
Colors Available:
Rotaries
W
Rockers
Toggles
LED Tipped Rockers & Paddles
Gray
B97
Similar pages