NKK M2T12SA5G30 Process sealed miniature toggle Datasheet

Process Sealed Miniature Toggles
Series M2
Distinctive Characteristics
Antijamming actuator design protects against mechanism damage from
downward force on the toggle.
Single unit construction of the bushing and top of the housing
gives protection from cleaning fluids orother liquids.
O-ring surrounding actuator at top of bushing interior
prevents liquids from reaching switch mechanism.
Ultrasonic welding of upper and lower housing
seals out contaminants and allows automated
soldering and cleaning.
Terminals are epoxy sealed to prevent entry of
flux, solvents, and other contaminants.
Bracketed models have crimped legs to ensure
secure PC mounting and prevent dislodging
during automated soldering.
Logic level and power capabilities are available to suit
varying applications.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Miniature Toggles
Series M2
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
Logic Level (code G):
Logic/Power Level (code A):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Contact Timing:
Angle of Throw:
Materials & Finishes
Toggle/Lever:
Support Bracket:
Bushing/Housing:
Sealing Ring:
Base:
Movable Contacts:
Stationary Contacts:
Terminals:
6A @ 125V AC or 3A @ 250V AC;
4A @ 30V DC (On-On circuit) & 3A @ 30V DC (all other circuits)
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum
25,000 operations minimum for silver; 50,000 operations minimum for gold
Nonshorting (break-before-make)
26°
Brass with chrome plating
Brass with tin plating
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Glass fiber reinforced polyamide (UL94V-0)
Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G);
or silver alloy with gold plating (code A)
Silver alloy with silver plating (code W); copper or brass with gold plating (code G);
or silver alloy with gold plating (code A)
Copper or brass with silver or gold plating
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering:
Cleaning:
Wave Soldering Recommended: See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
Standards & Certifications
Flammability Standards:
UL Recognized:
C-UL Recognized:
R
CSA Certified:
UL94V-0 rated bushing/housing & base
All models recognized at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC or 0.4A @ 28V DC;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
All models recognized at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC or 0.4A @ 28V DC;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All models certified at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC;
CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series M2
Process Sealed Miniature Toggles
TYPICAL SWITCH ORDERING EXAMPLE
M2T
2
1
S
POLES
G
A5
BUSHING
1
SPDT
2
DPDT
A5
CIRCUITS
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
03
PC TERMINALS
.250” (6.35mm)
Double Flatted
03
Straight
13
Straight with
.460” (11.7mm) Bracket
30
.150” (3.81mm) Right Angle
40
.150” (3.81mm) Vertical
05
.425” (10.8mm) Extended PC
CONTACT MATERIALS & RATINGS
06
.750” (19.05mm) Extended PC
W
Silver; Rated
6A @ 125V AC & 3A @ 250V AC
07
.964” (24.5mm) Extended PC
G
Gold; Rated
0.4VA max @ 28V AC/DC max
A
Gold over Silver; Rated 6A @
125V AC & 0.4VA max @ 28V
AC/DC max
( ) = Momentary
ACTUATORS
S
.500” (12.7mm)
Bat Lever
S4
.300” (7.62mm)
Bat Lever
IMPORTANT:
Switches are supplied without UL,
C-UL & CSA marking unless specified. Specific models & ratings noted
on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
M2T12SA5G03
.500” (12.7mm Bat Lever)
.250” (6.35mm) Bushing
with Double Flat
Gold Contacts
with 0.4VA Rating
SPDT
ON-NONE-ON Circuit
Straight PC Terminals
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series M2
Process Sealed Miniature Toggles
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Connected Terminals
Throw & Schematics
Down
Center
Up
Down
Center
Up
SP
M2T12
M2T13
M2T15
M2T18
M2T19
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3
OPEN
2-1
SPDT
DP
M2T22
M2T23
M2T25
M2T28
M2T29
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3 5-6
OPEN
2-1 5-4
DPDT
Pole
Model
Note:
Terminal numbers are not
actually on the switch.
2 (COM)
3
2
3
1
5
(COM)
1
6
4
ACTUATORS
S
.500” (12.7mm)
Bat Lever
Material:
Chrome over brass
(2.8) Dia
.110
S4
26°
.300” (7.62mm)
Bat Lever
(2.7) Dia
.106
(12.7)
.500
Material:
Chrome over brass
Standard Combinations: S Bat Lever with straight terminals
(code 03) with silver or gold contacts.
26°
(7.62)
.300
Standard Combinations: S4 Bat Lever with bracketed terminals
(codes 13, 30, 40) with silver or gold contacts.
BUSHING
A5
.250” (6.35mm) Double Flatted
(6.8)
.268
(6.2)
.244
(5.2)
.205
(6.35)
.250
CONTACT MATERIALS & RATINGS
W
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Complete explanation of operating range in Supplement section.
A
Gold over Silver
Power Level
or Logic Level
6A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits
within the same application. See Supplement section for complete explanation of dual rating and operating range.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Miniature Toggles
Series M2
PC TERMINALS
03
(4.8)
.189
Straight
3
(4.8) (5.9)
.189 .232
Epoxy Seal
2
1
Single Pole
Straight with
.460” (11.7mm) Bracket
5
1
4
(7.9) Typ
.311
2
(4.7) Typ
.185
1
(11.7)
.460
Double Pole
(1.6) Typ
.063
(2.4) Typ
.095
3
6
2
5
1
4
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(5.9)
.232
Single Pole
.150” (3.81mm) Right Angle
3
2
(4.7) Typ
.185
1
CL
40
.150” (3.81mm) Vertical
6
5
4
3
2
1
Double Pole
(3.81) Typ
.150
5
1
4
A
2
(4.7) Typ
.185
1
Thk = (0.8)
.031
(3.81) Typ
.150
(2.54) Typ
.100
(1.8) Dia Typ
.073
Double Pole
(4.8)
.189
.750” (19.05mm)
Extended PC
.964” (24.5mm)
Extended PC
2
(2.4) Typ
.094
(2.54) Typ
.100
(1.8) Dia Typ
.073
3
(1.27)
.050
07
6
(12.7)
.500
.425” (10.8mm)
Extended PC
Epoxy Seal
06
3
(12.7)
.500
Single Pole
05
(3.81)
.150
(2.54) Typ
.100
(1.8) Dia Typ
.073
1
(3.81)
.150
(4.7) Typ
.185
(12.7)
.500
3
2
(4.7) Typ
.185
Double Pole
(1.8) Dia Typ
.073
(2.54) Typ
.100
Single Pole
(7.9) Typ
.311
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(12.7)
.500
(3.81)
.150
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.6) Typ
.063
3
30
6
2
(1.8) Dia Typ
.073
(1.17)
.046
Thk = (0.8)
.031
13
(4.7) Typ
.185
3
(1.8) Dia Typ
.073
Single Pole
3
6
2
5
1
4
(4.7) Typ
.185
(1.8) Dia Typ
.073
Double Pole
Dimension A = terminal lengths as shown beside the terminal codes at the left.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series M2
Process Sealed Miniature Toggles
TYPICAL SWITCH DIMENSIONS
Single Pole
Straight PC
NKK P/N This Side
(6.2)
.244
3
(4.7) Typ
.185
26°
(0.8) Typ
.031
(2.8) Dia
.110
(5.2)
.205
(6.35)
.250
(12.7)
.500
M2T12SA5G03
(9.4)
.370
(21.6)
.850
(12.7)
.500
2
1
(4.8)
.189
(1.17)
.046
(6.6)
.260
Actuator in Down Position
Double Pole
Straight PC
(4.8)
.189
NKK P/N This Side
(6.2)
.244
(4.7) Typ
.185
26°
(0.8) Typ
.031
(2.8) Dia
.110
(6.35)
.250
(12.7)
.500
(5.2)
.205
M2T22SA5G03
(9.4)
.370
(21.6)
.850
6
3
5
2
4
1
(12.7)
.500
(1.17) Typ
.046
(4.8)
.189
(11.5)
.453
Actuator in Down Position
Single & Double Pole
Straight PC • Bracket
26°
(2.7) Dia
.106
(7.62)
.300
(6.2)
.244
(5.8)
.228
NKK P/N
This Side
(11.7) Typ
.460
1
2
3
(4.8)
.189
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
(4.8)
.189
(3.2) Typ
.126
(1.17) Typ
.046
(1.17) Typ
.046
(15.75)
.620
M2T12S4A5G13
(4.7) Typ
.185
(8.0)
.315
(11.5)
.453
Actuator in Down Position
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Miniature Toggles
Series M2
TYPICAL SWITCH DIMENSIONS
Right Angle PC
Single Pole
NKK P/N
This Side
(6.2)
.244
(2.7) Dia
.106
1
2
3
(5.2)
.205
(6.6)
.260
(1.3) Typ
.051
(5.08)
.200
(7.62)
.300
M2T12S4A5G30
(6.15)
.242
(0.4)
.016
(12.7)
.500
(1.27)
.050
(4.7) Typ
.185
(0.8) Typ
.031
(3.2)
.126
(12.7)
.500
Actuator in Down Position
Right Angle PC
Double Pole
NKK P/N
This Side
(6.2)
.244
(2.7) Dia
.106
4
5
6
(11.5)
.453
(5.2)
.205
(0.5)
.020
1
(1.3) Typ
.051
(5.08)
.200
(7.62)
.300
M2T22S4A5G30
(6.15)
.242
(0.4)
.016
(12.7)
.500
(1.27) Typ
.050
(3.81)
.150
2
(3.7)
.146
3
(0.8) Typ
.031
(4.7) Typ
.185
(12.7)
.500
Actuator in Down Position
Vertical PC
Single Pole
(7.2)
.283
NKK P/N This Side
3
(6.2)
.244
(1.0)
.039
(0.5)
.020
26°
(12.7)
.500
2
1
(4.2)
.165
(2.7) Dia
.106
(1.3) Typ
.051
(5.08)
.200
(7.62)
.300
M2T12S4A5G40
(6.15)
.242
(0.4)
.016
(12.7)
.500
(0.8) Typ
.031
(3.81) Typ
.150
(1.27)
.050
Actuator in Down Position
Vertical PC
Double Pole
(7.2)
.283
(6.2)
.244
(1.3) Typ
.051
(5.08)
.200
(4.8)
.189
NKK P/N This Side
(1.0)
.039
26°
(0.5)
.020
(2.7) Dia
.106
M2T22S4A5G40
(6.6)
.260
(7.62)
.300
(6.15)
.242
(0.4)
.016
(12.7)
.500
(0.8) Typ
.031
(3.81) Typ
.150
6
3
5
2
4
1
(12.7)
.500
(4.2)
.165
(11.5)
.453
(1.27) Typ
.050
Actuator in Down Position
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages