NKK M2T23S4A5G30 General specification Datasheet

Rockers
Toggles
Series M2
A
General Specifications
Electrical Capacity (Resistive Load)
Keylocks
Programmable Illuminated PB
Pushbuttons
Power Level (silver):
Logic Level (gold):
Logic/Power Level:
(gold over silver)
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Contact Timing:
Angle of Throw:
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Rotaries
Materials & Finishes
Supplement
Process Sealed Miniature Toggles
Toggle/Lever:
Support Bracket:
Bushing/Housing:
Sealing Ring:
Base:
Movable Contacts:
Stationary Contacts:
Terminals:
6A @ 125V AC or 3A @ 250V AC;
4A @ 30V DC (On-On circuit) & 3A @ 30V DC (all other circuits)
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines silver & gold ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum
25,000 operations minimum for silver; 50,000 operations minimum for gold
Nonshorting (break-before-make)
26°
Brass with nickel plating
Brass with tin plating
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Glass fiber reinforced polyamide (UL94V-0)
Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G);
or silver alloy with gold plating (code A)
Silver alloy with silver plating (code W); copper or brass with gold plating (code G);
or silver alloy with gold plating (code A)
Copper or brass with silver or gold plating
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in
1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering:
Wave Soldering Recommended: See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Cleaning:
Automated cleaning. See Cleaning specifications in Supplement section.
Standards & Certifications
Flammability Standards:
UL94V-0 rated bushing/housing & base
UL:
File No. E44145 - Recognized only when ordered with marking on switch.
Add “/U” or “/CUL” before first dash in part number to order UL recognized switch.
All models recognized at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC or 0.4A @ 28V DC.
CSA:
File No. 023535_0_000 - Certified only when ordered with marking on switch.
Add “/C” to end of part number to order CSA certified switch.
All models certified at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC.
A88
www.nkkswitches.com
A
Rockers
Distinctive Characteristics
Toggles
Series M2
Process Sealed Miniature Toggles
Pushbuttons
Antijamming actuator design protects against mechanism damage from
downward force on the toggle.
Programmable Illuminated PB
Single unit construction of the bushing and top of the housing
gives protection from cleaning fluids or other liquids.
Keylocks
O-ring surrounding actuator at top of bushing interior
prevents liquids from reaching switch mechanism.
Rotaries
Ultrasonic welding of upper and lower housing
seals out contaminants and allows automated
soldering and cleaning.
Slides
Terminals are epoxy sealed to prevent entry of
flux, solvents, and other contaminants.
Tilt
Tactiles
Bracketed models have crimped legs to ensure
secure PC mounting and prevent dislodging
during automated soldering.
Touch
Logic level and power capabilities are available to suit
varying applications.
Supplement
Accessories
Indicators
Actual Size
www.nkkswitches.com
A89
Process Sealed Miniature Toggles
A
TYPICAL SWITCH ORDERING EXAMPLE
M2T
1
2
S
A5
G
03
Poles
1
SPDT
2
DPDT
Bushing
A5
Circuits
PC Terminals
.250” (6.35mm)
Double Flatted
Contact Materials & Ratings
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series M2
W
Silver; Rated
6A @ 125V AC & 3A @ 250V AC
G
Gold; Rated
0.4VA max @ 28V AC/DC max
A
Gold over Silver; Rated
6A @ 125V AC &
0.4VA max @ 28V AC/DC max
( ) = Momentary
03
Straight
13
Straight with
.460” (11.7mm) Bracket
30
.150” (3.81mm) Right Angle
40
.150” (3.81mm) Vertical
05
.390” (9.9mm) Extended PC
06
.728” (18.5mm) Extended PC
07
.945” (24.0mm) Extended PC
S
.500” (12.7mm) Bat Lever (standard combination
with code 03 straight terminals)
S4
.300” (7.62mm) Bat Lever (standard combinations
with codes 13, 30 & 40 bracketed terminals)
Tactiles
Slides
Actuators
IMPORTANT:
Touch
Tilt
Switches are supplied without UL, cULus & CSA marking unless specified.
UL, cULus & CSA recognized only when ordered with marking on the switch.
Specific models, ratings & ordering instructions are noted on the General
Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
M2T12SA5G03
Accessories
.500” (12.7mm)
Bat Lever
.250” (6.35mm) Bushing
with Double Flat
Supplement
Gold Contacts
with 0.4VA Rating
SPDT
ON-NONE-ON Circuit
Straight PC Terminals
A90
www.nkkswitches.com
A
POLES & CIRCUITS
Up
Down
Center
Up
M2T12
M2T13
M2T15
M2T18
M2T19
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3
OPEN
2-1
M2T22
M2T23
M2T25
M2T28
M2T29
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3 5-6
Terminal numbers are not
actually on the switch.
2 (COM)
SPDT
3
2
OPEN
2-1 5-4
DPDT
3
1
(COM)
1
Programmable Illuminated PB
SP
Note:
Pushbuttons
Center
Model
Rockers
Throw & Schematics
Down
Pole
DP
Connected Terminals
5
6
4
.500” (12.7mm)
Bat Lever
Material:
Nickel over Brass
(2.8) Dia
.110
S4
26°
.300” (7.62mm)
Bat Lever
(2.7) Dia
.106
(12.7)
.500
Material:
Nickel over Brass
Standard Combinations: S Bat Lever with straight terminals
(code 03) with silver or gold contacts.
26°
Rotaries
S
Keylocks
ACTUATORS
(7.62)
.300
Standard Combinations: S4 Bat Lever with bracketed terminals
(codes 13, 30, 40) with silver or gold contacts.
.250” (6.35mm) Double Flatted
(6.8)
.268
(6.2)
.244
(5.2)
.205
Tilt
A5
Tactiles
BUSHING
(6.35)
.250
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Indicators
W
Touch
CONTACT MATERIALS & RATINGS
Power Level
or Logic Level
6A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Supplement
Gold over Silver
Accessories
Complete explanation of operating range in Supplement section.
A
Slides
Toggle Position
( ) = Momentary
Toggles
Series M2
Process Sealed Miniature Toggles
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits
within the same application. See Supplement section for complete explanation of dual rating and operating range.
www.nkkswitches.com
A91
Process Sealed Miniature Toggles
A
PC TERMINALS
03
Rockers
Toggles
Series M2
(4.8)
.189
Straight
3
(4.8) (5.9)
.189 .232
Epoxy Seal
1
Pushbuttons
Programmable Illuminated PB
Single Pole
Straight with
.460” (11.7mm) Bracket
(7.9) Typ
.311
2
(4.7) Typ
.185
1
(11.7)
.460
1
4
Single Pole
.150” (3.81mm) Right Angle
Rotaries
3
2
(4.7) Typ
.185
1
Double Pole
(1.6) Typ
.063
(2.4) Typ
.095
3
6
2
5
1
4
CL
Slides
Tactiles
40
.150” (3.81mm) Vertical
6
5
4
3
2
1
Double Pole
(3.81) Typ
.150
4
A
2
(4.7) Typ
.185
1
Thk = (0.8)
.031
(3.81) Typ
.150
(2.54) Typ
.100
(1.8) Dia Typ
.073
Tilt
Touch
Indicators
Accessories
Supplement
5
1
Double Pole
(4.8)
.189
.728” (18.5mm)
Extended PC
.945” (24.0mm)
Extended PC
2
(2.4) Typ
.094
(2.54) Typ
.100
(1.8) Dia Typ
.073
3
(1.27)
.050
07
6
(12.7)
.500
.390” (9.9mm)
Extended PC
Epoxy Seal
06
3
(12.7)
.500
Single Pole
05
(3.81)
.150
(2.54) Typ
.100
(1.8) Dia Typ
.073
1
(3.81)
.150
(4.7) Typ
.185
(12.7)
.500
3
2
(4.7) Typ
.185
Double Pole
(1.8) Dia Typ
.073
(2.54) Typ
.100
Single Pole
(7.9) Typ
.311
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(12.7)
.500
(3.81)
.150
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(5.9)
.232
Keylocks
5
(1.6) Typ
.063
3
30
6
2
(1.8) Dia Typ
.073
(1.17)
.046
Thk = (0.8)
.031
13
(4.7) Typ
.185
2
3
(1.8) Dia Typ
.073
Single Pole
3
6
2
5
1
4
(4.7) Typ
.185
(1.8) Dia Typ
.073
Double Pole
Dimension A = terminal lengths as shown beside the terminal codes at the left.
A92
www.nkkswitches.com
A
TYPICAL SWITCH DIMENSIONS
Straight PC
Rockers
Single Pole
Toggles
Series M2
Process Sealed Miniature Toggles
26°
(4.8)
.189
(9.4)
.370
(21.6)
.850
(1.17)
.046
(6.6)
.260
M2T12SA5G03
Actuator in Down Position
Double Pole
Straight PC
(4.8)
.189
NKK P/N This Side
(6.2)
.244
(4.7) Typ
.185
26°
(0.8) Typ
.031
(2.8) Dia
.110
(6.35)
.250
(12.7)
.500
(5.2)
.205
(9.4)
.370
(21.6)
.850
Keylocks
(6.35)
.250
(12.7)
.500
6
3
5
2
4
1
Rotaries
(5.2)
.205
1
(12.7)
.500
(1.17) Typ
.046
(4.8)
.189
(11.5)
.453
Slides
(2.8) Dia
.110
(12.7)
.500
2
(0.8) Typ
.031
Programmable Illuminated PB
3
(4.7) Typ
.185
M2T22SA5G03
Actuator in Down Position
Straight PC • Bracket
Tilt
Single & Double Pole
Tactiles
(6.2)
.244
Pushbuttons
NKK P/N This Side
26°
(2.7) Dia
.106
Touch
(6.2)
.244
(5.8)
.228
NKK P/N
This Side
2
3
(4.8)
.189
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
(4.7) Typ
.185
(4.8)
.189
(3.2) Typ
.126
(1.17) Typ
.046
(1.17) Typ
.046
(15.75)
.620
(8.0)
.315
Accessories
1
Indicators
(11.7) Typ
.460
(11.5)
.453
M2T12S4A5G13
Actuator in Down Position
www.nkkswitches.com
A93
Supplement
(7.62)
.300
Toggles
Series M2
Process Sealed Miniature Toggles
A
TYPICAL SWITCH DIMENSIONS
Single Pole
Rockers
Right Angle PC
Pushbuttons
NKK P/N
This Side
(2.7) Dia
.106
1
2
3
Programmable Illuminated PB
(5.2)
.205
(6.6)
.260
(1.3) Typ
.051
(5.08)
.200
(7.62)
.300
M2T12S4A5G30
(6.15)
.242
(0.4)
.016
(12.7)
.500
(1.27)
.050
(4.7) Typ
.185
(0.8) Typ
.031
(12.7)
.500
Actuator in Down Position
Right Angle PC
Double Pole
NKK P/N
This Side
Rotaries
Keylocks
(6.2)
.244
(6.2)
.244
(2.7) Dia
.106
4
5
6
(11.5)
.453
(5.2)
.205
Slides
(0.5)
.020
1
(1.3) Typ
.051
(5.08)
.200
(6.15)
.242
(0.4)
.016
(12.7)
.500
(1.27) Typ
.050
(3.81)
.150
(4.7) Typ
.185
(3.7)
.146
3
(0.8) Typ
.031
(12.7)
.500
Tactiles
(7.62)
.300
2
Actuator in Down Position
Vertical PC
Single Pole
Touch
Tilt
M2T22S4A5G30
(7.2)
.283
NKK P/N This Side
3
Indicators
(6.2)
.244
Supplement
Accessories
(1.3) Typ
.051
(5.08)
.200
M2T12S4A5G40
A94
2
(1.0)
.039
(0.5)
.020
26°
1
(4.2)
.165
(2.7) Dia
.106
(7.62)
.300
(6.15)
.242
(0.4)
.016
(12.7)
.500
(0.8) Typ
.031
(3.81) Typ
.150
Actuator in Down Position
www.nkkswitches.com
(12.7)
.500
(6.6)
.260
(1.27)
.050
(3.2)
.126
A
TYPICAL SWITCH DIMENSIONS
(0.5)
.020
(2.7) Dia
.106
(1.3) Typ
.051
(5.08)
.200
(7.62)
.300
(6.15)
.242
(0.4)
.016
(12.7)
.500
3
5
2
4
1
(0.8) Typ
.031
(3.81) Typ
.150
Actuator in Down Position
Pushbuttons
(1.0)
.039
26°
6
(12.7)
.500
(4.2)
.165
(11.5)
.453
Programmable Illuminated PB
(6.2)
.244
(4.8)
.189
NKK P/N This Side
(1.27) Typ
.050
M2T22S4A5G40
HANDLING PRECAUTION
When an application employs M2T model with silver contacts, 5 to 6A @ 125V AC, and the switch will be actuated 100 or more times per day, note these instructions:
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Rotaries
Peel off the film seal on the switch body situated over the part number after cleaning.
Keylocks
(7.2)
.283
Vertical PC
Rockers
Double Pole
Toggles
Series M2
Process Sealed Miniature Toggles
www.nkkswitches.com
A95
Similar pages