New Product M30L40C Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier FEATURES • Guardring for overvoltage protection TO-220AB • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation 3 2 • Solder dip 260 °C, 40 s 1 PIN 1 PIN 2 PIN 3 CASE • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection applications. PRIMARY CHARACTERISTICS IF(AV) 2 x 15 A VRRM 40 V EAS 20 mJ IFSM 280 A VF at IF = 15 A 0.413 V TJ max. 150 °C MECHANICAL DATA Case: TO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL M30L40C UNIT VRRM 40 V IF(AV) 30 15 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 280 A Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz IRRM 1.0 A Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) total device per diode Non-repetitive avalanche energy at 25 °C, IAS = 2 A, L = 10 mH per diode Voltage rate of change (rated VR) Operating junction and storage temperature range www.vishay.com 430 EAS 20 mJ dV/dt 10 000 V/µs TJ, TSTG - 65 to + 150 °C For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89012 Revision: 27-Aug-08 New Product M30L40C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Instantaneous forward voltage per diode (1) IF = 8 A IF = 15 A IF = 30 A SYMBOL TYP. MAX. 0.430 0.490 0.595 0.55 - 0.331 0.413 0.572 0.48 - IR 88 12 360 45 µA mA CJ 750 - pF TJ = 25 °C V VF IF = 8 A IF = 15 A IF = 30 A TJ = 125 °C Reverse current per diode (2) VR = 40 V TJ = 25 °C TJ = 100 °C Typical junction capacitance per diode 4.0 V, 1 MHz UNIT Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL M30L40C UNIT RθJC 2.0 °C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE M30L40C-E3/4W 2.068 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 35 9 D = 0.3 8 30 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 25 20 15 10 5 D = 0.2 7 D = 0.8 D = 0.5 D = 0.1 D = 1.0 6 5 4 T 3 2 D = tp/T 1 0 tp 0 0 25 50 75 100 125 150 0 2 4 6 8 10 12 14 16 18 Case Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode Document Number: 89012 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 431 New Product M30L40C Vishay General Semiconductor 10 000 TJ = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 125 °C TJ = 100 °C 10 TJ = 25 °C 1 1000 100 0.1 0 0.2 0.4 0.6 0.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 1000 TJ = 150 °C 100 TJ = 125 °C TJ = 100 °C 10 1 0.1 TJ = 25 °C 20 30 40 50 60 70 80 90 1 0.1 0.01 0.01 10 Junction to Case 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) www.vishay.com 432 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89012 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1