Renesas M38D2GCXXXHP Single-chip 8-bit cmos microcomputer Datasheet

38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
Standard Characteristics Example
Standard characteristics described below are just examples of the 38D2 Group's characteristics and are not guaranteed.
For rated values, refer to "38D2 Group Data sheet".
(1) Power Source Current Standard Characteristics Example (Vcc-Icc)
When system is operating in frequency/2 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
f(XIN) = 12 MHz
f(XIN) = 8 MHz
Power Source Current Icc [mA]
6.0
f(XIN) = 4 MHz
f(XIN) = 2 MHz
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 1. Vcc-Icc (frequency/2 mode)
When system is operating in frequency/4 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
f(XIN)
f(XIN)
f(XIN)
f(XIN)
f(XIN)
Power Source Current Icc [mA]
6.0
= 16 MHz
= 12 MHz
= 8 MHz
= 4 MHz
= 2 MHz
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 2. Vcc-Icc (frequency/4 mode)
When system is operating in frequency/8 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
f(XIN)
f(XIN)
f(XIN)
f(XIN)
f(XIN)
Power Source Current Icc [mA]
6.0
= 16 MHz
= 12 MHz
= 8 MHz
= 4 MHz
= 2 MHz
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 3. Vcc-Icc (frequency/8 mode)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 1 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
At WIT instruction executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
3.0
f(XIN)
f(XIN)
f(XIN)
f(XIN)
f(XIN)
Power Source Current Icc [mA]
2.5
= 16 MHz
= 12 MHz
= 8 MHz
= 4 MHz
= 2 MHz
2.0
1.5
1.0
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 4. Vcc-Icc (at WIT instruction executed)
At STP instruction executed (Ta = 25 °C, output transistor is in the cut-off state)
30
Power Source Current Icc [nA]
27
24
21
18
15
12
9
6
3
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Power Source Voltage Vcc [V]
Fig. 5. Vcc-Icc (at STP instruction executed)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 2 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
At 12 MHz frequency/2, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
7.0
A/D conversion executed
A/D conversion not executed
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Power Source Voltage Vcc [V]
Fig. 6. Vcc-Icc (increment at A/D conversion executed)
At 16 MHz frequency/4 mode, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
7.0
A/D conversion executed
A/D conversion not executed
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Power Source Voltage Vcc [V]
Fig. 7. Vcc-Icc (increment at A/D conversion executed)
At 16 MHz frequency/8 mode, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
7.0
A/D conversion executed
A/D conversion not executed
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Power Source Voltage Vcc [V]
Fig. 8. Vcc-Icc (increment at A/D conversion executed)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 3 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
When system is operating in low-speed mode (crystal oscillation, ceramic oscillation stop, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
f(XCIN) = 32.768 kHz
Power Source Current Icc [μA]
25
20
15
10
5
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 9. Vcc-Icc (low-speed mode)
At WIT instruction executed (crystal oscillation, ceramic oscillation stop, Ta = 25 °C, output transistor is in the cut-off state)
f(XCIN) = 32.768 kHz
Power Source Current Icc [μA]
10
8
6
4
2
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 10. Vcc-Icc (at WIT instruction executed)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 4 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
When system is operating in on-chip oscillator mode (external oscillation stop, output transistor is in the cut-off state)
A/D conversion not executed
450
Ta = -20 °C
Ta = 25 °C
400
Power Source Current Icc [μA]
Ta = 85°C
350
300
250
200
150
100
50
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 11. Vcc-Icc (on-chip oscillator mode)
On-chip oscillator operating mode, at WIT instruction executed (external oscillation stop, output transistor is in the cut-off state)
450
Ta = -20 °C
Ta = 25 °C
400
Power Source Current Icc [μA]
Ta = 85°C
350
300
250
200
150
100
50
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 12. Vcc-Icc (on-chip oscillator mode at WIT instruction executed)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 5 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(2) Power Supply Current Standard Characteristics Example (f(XIN) -Icc)
When system is operating in frequency/2 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
2
4
6
8
10
12
14
16
Oscillation Frequency f(XIN) [ MHz]
Fig. 13. f(XIN) -Icc (frequency/2 mode)
When system is operating in frequency/4 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
2
4
6
8
10
12
14
16
Oscillation Frequency f(XIN) [ MHz]
Fig. 14. f(XIN) -Icc (frequency/4 mode)
When system is operating in frequency/8 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
A/D conversion not executed
7.0
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [mA]
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
2
4
6
8
10
12
14
16
Oscillation Frequency f(XIN) [ MHz]
Fig. 15. f(XIN) -Icc (frequency/8 mode)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 6 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
At WIT instruction executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state)
3.0
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [mA]
2.5
2.0
1.5
1.0
0.5
0.0
0
2
4
6
8
10
12
14
16
Oscillation Frequency f(XIN) [ MHz]
Fig. 16. f(XIN) -Icc (at WIT instruction executed)
(3) Power Supply Current Standard Characteristics Example (Ta-Icc)
When system is operating in on-chip oscillator mode (external oscillation stop, output transistor is in the cut-off state)
A/D conversion not executed
450
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [μA]
400
350
300
250
200
150
100
50
0
-40
-20
0
20
40
60
80
100
Operating Temperature Range Ta [°C]
Fig. 17. Ta-Icc (on-chip oscillator mode)
On-chip oscillator operating mode at WIT instruction executed (external oscillation stop, output transistor is in the cut-off state)
450
Vcc = 5.0V
Vcc =3.0V
Power Source Current Icc [μA]
400
350
300
250
200
150
100
50
0
-40
-20
0
20
40
60
80
100
Operating Temperature Range Ta [°C]
Fig. 18. Ta-Icc (on-chip oscillator mode at WIT instruction executed)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 7 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(4) Port Standard characteristics Example (VOH-IOH)
VOH-IOH (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27)
-50
"H" Output Current IOH [mA]
-40
Ta = -20 °C
Ta = 25 °C
-30
Ta = 85 °C
-20
-10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
"H" Output Voltage VOH [V]
Fig. 19. VOH-IOH (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27)
VOH-IOH (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27)
-30
"H" Output Current IOH [mA]
-25
Ta = -20 °C
-20
Ta = 25 °C
Ta = 85 °C
-15
-10
-5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
"H" Output Voltage VOH [V]
Fig. 20. VOH-IOH (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27)
VOH-IOH (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27)
-12
"H" Output Current IOH [mA]
-10
-8
Ta = -20 °C
Ta = 25 °C
Ta =85 °C
-6
-4
-2
0
0.0
0.5
1.0
1.5
2.0
2.5
"H" Output Voltage VOH [V]
Fig. 21. VOH-IOH (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 8 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
VOH-IOH (Vcc = 5.5 V, Ports P40-P47,P50-P57,P60-P62)
-50
Ta = -20 °C
"H" Output Current IOH [mA]
-40
Ta = 25 °C
Ta = 85 °C
-30
-20
-10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
"H" Output Voltage VOH [V]
Fig. 22. VOH-IOH (Vcc = 5.5 V, Ports P40-P47,P50-P57,P60-P62)
VOH-IOH (Vcc = 4.0 V, Ports P40-P47,P50-P57,P60-P62)
-30
"H" Output Current IOH [mA]
-25
Ta = -20 °C
Ta = 25 °C
-20
Ta = 85 °C
-15
-10
-5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
"H" Output Voltage VOH [V]
Fig. 23. VOH-IOH (Vcc = 4.0 V, Ports P40-P47,P50-P57,P60-P62)
VOH-IOH (Vcc = 2.5 V, Ports P40-P47,P50-P57,P60-P62)
-12
"H" Output Current IOH [mA]
-10
-8
Ta = -20 °C
Ta = 25 °C
Ta = 85 °C
-6
-4
-2
0
0.0
0.5
1.0
1.5
2.0
2.5
"H" Output Voltage VOH [V]
Fig. 24. VOH-IOH (Vcc = 2.5 V, Ports P40-P47,P50-P57,P60-P62)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 9 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(5) Port Standard Characteristics Example (VOL-IOL)
VOL-IOL (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27)
75
70
65
"L" Output Current IOL [mA]
60
55
50
45
Ta =- 20 °C
Ta = 25 °C
Ta = 85 °C
40
35
30
25
20
15
10
5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
"L" Output Voltage VOL [V]
Fig. 25. VOL-IOL (Vcc = 5.5 V, Ports Ports P30-P37,P52,P53)
VOL-IOL (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27)
50
45
"L" Output Current IOL [mA]
40
35
30
Ta = -20 °C
Ta = 25 °C
Ta = 85 °C
25
20
15
10
5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
"L" Output Voltage VOL [V]
Fig. 26. VOL-IOL (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27)
VOL-IOL (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27)
20
18
"L" Output Current IOL [mA]
16
14
12
Ta = -20 °C
Ta = 25 °C
10
Ta =85 °C
8
6
4
2
0
0.0
0.5
1.0
1.5
2.0
2.5
"L" Output Voltage VOL [V]
Fig. 27. VOL-IOL (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 10 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
VOL-IOL (Vcc = 5.5 V,Ports P30-P37,P52,P53)
75
Ta =- 20 °C
70
"L" Output Current IOL [mA]
65
60
Ta = 25 °C
55
Ta = 85 °C
50
45
40
35
30
25
20
15
10
5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
"L" Output Voltage VOL [V]
Fig. 28. VOL-IOL (Vcc = 5.5 V, Ports P30-P37,P52,P53)
VOL-IOL (Vcc = 4.0 V, Ports P30-P37,P52,P53)
50
Ta = -20 °C
45
"L" Output Current IOL [mA]
40
Ta = 25 °C
Ta = 85 °C
35
30
25
20
15
10
5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
"L" Output Voltage VOL [V]
Fig. 29. VOL-IOL (Vcc = 4.0 V, Ports P30-P37,P52,P53)
VOL-IOL (Vcc = 2.5 V, Ports P30-P37,P52,P53)
20
Ta = -20 °C
18
Ta = 25 °C
"L" Output Current IOL [mA]
16
Ta = 85 °C
14
12
10
8
6
4
2
0
0.0
0.5
1.0
1.5
2.0
2.5
"L" Output Voltage VOL [V]
Fig. 30. VOL-IOL (Vcc = 2.5 V, Ports P30-P37,P52,P53)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 11 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
VOL-IOL (Vcc = 5.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62)
75
Ta =- 20 °C
70
65
Ta = 25 °C
"L" Output Current IOL [mA]
60
Ta = 85 °C
55
50
45
40
35
30
25
20
15
10
5
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
"L" Output Voltage VOL [V]
Fig. 31. VOL-IOL (Vcc = 5.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62)
VOL-IOL (Vcc = 4.0 V, Ports P40-P47, P51-P57, P60, P61,P62)
50
Ta = -20 °C
Ta = 25 °C
"L" Output Current IOL [mA]
40
Ta = 85 °C
30
20
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
"L" Output Voltage VOL [V]
Fig. 32. VOL-IOL (Vcc = 4.0 V, Ports P40-P47,P50,P51,P54-P57,P60-P62)
VOL-IOL (Vcc = 2.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62)
20
Ta = -20 °C
Ta = 25 °C
"L" Output Current IOL [mA]
16
Ta = 85 °C
12
8
4
0
0.0
0.5
1.0
1.5
2.0
2.5
"L" Output Voltage VOL [V]
Fig. 33. VOL-IOL (Vcc = 2.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 12 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(6) Port Standard Characteristics Example (Vcc-IIL)
Vcc-IIL (Ports P00-P07, P10-P17, P20-P27 when connecting pull-up transistor) (clerical error revised in rev.2.00)
-180
Ta = -20 °C
Ta = 25 °C
-160
Ta = 85°C
"L" Input Current IIL [μA]
-140
-120
-100
-80
-60
-40
-20
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 34. Vcc-IIL (when connecting pull-up transistor)
Vcc-IIL (Ports P30-P37, P40-P47, P50-P57, P60-P62 when connecting pull-up transistor)
-180
Ta = -20 °C
Ta = 25 °C
"L" Input Current IIL [μA]
-160
Ta = 85°C
-140
-120
-100
-80
-60
-40
-20
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 35. Vcc-IIL (when connecting pull-up transistor)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 13 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(7) Port Standard Characteristics Example (Vcc-VIHL)
Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P04-P07, P10-P17, P20-P27, P30, P32, P35, P36, P40-P47, P52, P53, P61, P62)
5
Input Voltage VIHL [V]
4
3
2
1
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 36. Vcc-VIHL (I/O Port (CMOS) )
Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P00-P03, P31,P33, P34, P37, P50, P51, P54-P57, P60)
5
"H" input voltage <VIH>
"L" input voltage <VIL>
Input Voltage VIHL [V]
4
3
2
1
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 37. Vcc-VIHL (I/O Port (CMOS) )
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 14 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
Vcc-VIHL (RESET pin, Ta = 25 °C)
5
"H" input voltage <VIH>
"L" input voltage <VIL>
Input Voltage VIHL [V]
4
3
2
1
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 38. Vcc-VIHL (RESET pin)
Vcc-VIHL (XIN pin, Ta = 25 °C)
5
Input Voltage VIHL [V]
4
3
2
1
0
1.5
2.0
2.5
3.0
3.5
4.0
Power Source Voltage Vcc [V]
Fig. 39. Vcc-VIHL (XIN pin)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 15 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
Vcc-HYS (RESET pin, Ta = 25 °C)
1.0
Hysteresis HYS [V]
0.8
0.6
0.4
0.2
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
4.5
5.0
5.5
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 40. Vcc-HYS (RESET pin)
Vcc-HYS (SIO function pin (RXD, SCLK) , Ta = 25 °C)
1.0
Hysteresis HYS [V]
0.8
0.6
0.4
0.2
0.0
1.5
2.0
2.5
3.0
3.5
4.0
Power Source Voltage Vcc [V]
Fig. 41. Vcc-HYS (SIO function pin)
Vcc-HYS (INT0- INT2, CNTR0, CNTR1, KW0-KW7, Ta = 25 °C)
1.0
Hysteresis HYS [V]
0.8
0.6
0.4
0.2
0.0
1.5
2.0
2.5
3.0
3.5
4.0
Power Source Voltage Vcc [V]
Fig. 42. Vcc-HYS (INT0- INT2, CNTR0, CNTR1, KW0-KW7)
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 16 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(8) Port Standard Characteristics Example (VIN-IIA, A/D conversion mode = 10bit )
VIN-IIA (A/D converter operation, f(Xin) = 12 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C )
2.0
1.5
Input Current IIA [μA]
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN [V]
Fig. 43. VIN-IIA (f(Xin) = 12 MHz frequency/2 mode )
VIN-IIA (A/D converter operation, f(Xin) = 10 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C )
2.0
1.5
Input Current IIA [μA]
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN [V]
Fig. 44. VIN-IIA (f(Xin) = 10 MHz frequency/2 mode )
VIN-IIA (A/D converter operation, f(Xin) = 8 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C )
2.0
1.5
Input Current IIA [μA]
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN [V]
Fig. 45. VIN-IIA (f(Xin) = 8 MHz frequency/2 mode )
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 17 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
VIN-IIA (A/D converter operating, f(Xin) = 4 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C )
1.0
0.8
Input Current IIA [μA]
0.6
0.4
0.2
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN [V]
Fig. 46. VIN-IIA (f(Xin) = 4 MHz frequency/2 mode )
VIN-IIA (A/D converter operating, f(Xin) = 2 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF =5.5 V, Ta = 25 °C )
0.5
0.4
Input Current IIA [μA]
0.3
0.2
0.1
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN [V]
Fig. 47. VIN-IIA (f(Xin) = 2 MHz frequency/2 mode )
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 18 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(9) On-chip Oscillator Frequency Characteristics Example
On-chip oscillator frequency characteristics (Vcc-OCO)
On-chip oscillator frequency OCO [ kHz]
8000
Ta = -20 °C
Ta = 25 °C
7000
Ta = 85 °C
6000
5000
4000
3000
2000
1000
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 48. Vcc-OCO
On-chip oscillator frequency characteristics (Ta-OCO)
On-chip oscillator frequency OCO [ kHz]
8000
Vcc = 5.0V
Vcc =3.0V
7000
6000
5000
4000
3000
2000
1000
0
-40
-20
0
20
40
60
80
100
Temperature [°C]
Fig. 49. Ta-OCO
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 19 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(10) A/D Conversion Accuracy Characteristics
A/D conversion accuracy standard characteristics example-1
A/D CONVERTER STEP WIDTH MEASUREMENT
• Temp. = 25[°C]
• CPU mode = frequency/2 mode
• A/D conversion clock = f(XIN) /2
• Vcc = 5.12[V]
• VREF = 5.12[V]
• f(XIN) = 12[MHz]
• 1LSB Width = 5.12[V] / 1024 = 5[mV]
• A/D conversion mode = 10bit
15.0
1LSB Width
Error
Absolute accuracy [mV]
10.0
5.0
1LSB
0.0
-5.0
Error
-10.0
-15.0
0
16
32
48
64
80
96
112
128
144
160
176
192
208
224
240
256
400
416
432
448
464
480
496
512
656
672
688
704
720
736
752
768
912
928
944
960
976
992
1008
1024
Conversion value
15.0
Absolute accuracy [mV]
10.0
5.0
0.0
-5.0
-10.0
-15.0
256
272
288
304
320
336
352
368
384
Conversion value
15.0
Absolute accuracy [mV]
10.0
5.0
0.0
-5.0
-10.0
-15.0
512
528
544
560
576
592
608
624
640
Conversion value
15.0
Absolute accuracy [mV]
10.0
5.0
0.0
-5.0
-10.0
-15.0
768
784
800
816
832
848
864
880
896
Conversion value
Fig. 50. A/D conversion accuracy standard characteristics example-1
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 20 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
A/D conversion accuracy standard characteristics example-2
A/D CONVERTER STEP WIDTH MEASUREMENT
• Vcc = 5.12[V]
• VREF = 5.12[V]
• f(XIN) = 12[MHz]
• 1LSB Width = 5.12[V] / 1024 = 5[mV]
• Temp. = 25[°C]
• CPU mode = frequency/2 mode
• A/D conversion clock = f(XIN) /8
• A/D conversion mode = 10bit
15.0
1LSB Width
Error
Absolute accuracy [mV]
10.0
5.0
1LSB Width
0.0
-5.0
Error
-10.0
-15.0
0
16
32
48
64
80
96
112
128
144
160
176
192
208
224
240
256
400
416
432
448
464
480
496
512
656
672
688
704
720
736
752
768
912
928
944
960
976
992
1008
1024
Conversion value
15.0
Absolute accuracy [mV]
10.0
5.0
0.0
-5.0
-10.0
-15.0
256
272
288
304
320
336
352
368
384
Conversion value
15.0
Absolute accuracy [mV]
10.0
5.0
0.0
-5.0
-10.0
-15.0
512
528
544
560
576
592
608
624
640
Conversion value
Absolute accuracy [LSB]
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
768
784
800
816
832
848
864
880
896
Conversion value
Fig. 51. A/D conversion accuracy standard characteristics example-2
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 21 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
A/D conversion accuracy standard characteristics example-3
A/D CONVERTER STEP WIDTH MEASUREMENT
• Vcc = 5.12[V]
• VREF = 5.12[V]
• f(XIN) = 12[MHz]
• 1LSB Width = 5.12[V] / 256 = 20[mV]
• Temp. = 25[°C]
• CPU mode = frequency/2 mode
• A/D conversion clock = f(XIN)/2
• A/D conversion mode = 8bit
60.0
1LSB Width
Error
Absolute accuracy [mV]
40.0
20.0
1LSB Width
0.0
Error
-20.0
-40.0
-60.0
0
16
32
48
64
80
96
208
224
112
128
Conversion value
60.0
Absolute accuracy [mV]
40.0
20.0
0.0
-20.0
-40.0
-60.0
128
144
160
176
192
240
256
Conversion value
Fig. 52. A/D conversion accuracy standard characteristics example-3
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 22 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
A/D conversion accuracy standard characteristics example-4
A/D CONVERTER STEP WIDTH MEASUREMENT
• Vcc = 5.12[V]
• VREF = 5.12[V]
• f(XIN) = 12[MHz]
• 1LSB Width = 5.12[V] / 256 = 20[mV]
• Temp. = 25[°C]
• CPU mode = frequency/2 mode
• A/D conversion clock = f(XIN) /8
• A/D conversion mode = 8bit
60.0
1LSB Width
Error
Absolute accuracy [mV]
40.0
20.0
1LSB Width
0.0
Error
-20.0
-40.0
-60.0
0
16
32
48
64
80
96
208
224
112
128
Conversion value
60.0
Absolute accuracy [mV]
40.0
20.0
0.0
-20.0
-40.0
-60.0
128
144
160
176
192
240
256
Conversion value
Fig. 53. A/D conversion accuracy standard characteristics example-4
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 23 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
A/D conversion accuracy standard characteristics example-5
A/D CONVERTER STEP WIDTH MEASUREMENT
• Vcc = 1.8[V]
• VREF = 1.8[V]
• OCO
• 1LSB Width = 1.8[V] / 1024 = 1.76[mV]
• Temp. = 25[°C]
• CPU mode = OCO
• A/D conversion clock = OCO
• A/D conversion mode = 10bit
5.28
1LSB Width
Error
Absolute accuracy [mV]
3.52
1.76
1LSB Width
0.00
-1.76
Error
-3.52
-5.28
0
16
32
48
64
80
96
112
128
144
160
176
192
208
224
240
256
400
416
432
448
464
480
496
512
656
672
688
704
720
736
752
768
912
928
944
960
976
992
1008
1024
Conversion value
5.28
Absolute accuracy [mV]
3.52
1.76
0.00
-1.76
-3.52
-5.28
256
272
288
304
320
336
352
368
384
Conversion value
5.28
Absolute accuracy [mV]
3.52
1.76
0.00
-1.76
-3.52
-5.28
512
528
544
560
576
592
608
624
640
Conversion value
5.28
Absolute accuracy [mV]
3.52
1.76
0.00
-1.76
-3.52
-5.28
768
784
800
816
832
848
864
880
896
Conversion value
Fig. 54. A/D conversion accuracy standard characteristics example-5
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 24 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
A/D conversion accuracy standard characteristics example-6
A/D CONVERTER STEP WIDTH MEASUREMENT
• Vcc = 1.8[V]
• VREF = 1.8[V]
• OCO
• 1LSB Width = 1.8[V] / 256 = 7.03[mV]
• Temp. = 25[°C]
• CPU mode = OCO
• A/D conversion clock = OCO
• A/D conversion mode = 8bit
21.09
1LSB Width
Error
Absolute accuracy [mV]
14.06
7.03
1LSB Width
0.00
Error
-7.03
-14.06
-21.09
0
16
32
48
64
80
96
112
128
208
224
240
256
Conversion value
21.09
Absolute accuracy [mV]
14.06
7.03
0.00
-7.03
-14.06
-21.09
128
144
160
176
192
Conversion value
Fig. 55. A/D conversion accuracy standard characteristics example-6
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 25 of 26
38D2 Group Standard Characteristics
M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP
M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP
(11) Icc increment by on-chip oscillator operation at f(Xin) operation (added in rev.2.00)
f(Xin)=8 MHz (high-speed mode),Vcc= 1.8V to 5.5V, Ta = 25°C, output transistor is in cut-off state, A/D converter not operating)
200
Icc Increment by OCO Operation [uA]
180
160
140
120
100
80
60
40
20
0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Power Source Voltage Vcc [V]
Note:The increment changes since the on-chip oscillator frequency changes depending on the
ambient temperature and VCC.
Fig. 56. Icc increment by on-chio oscillator operation at f(Xin) operation
REJ99B1154-0200
©2007. Renesas Technology Corp., All rights reserved.
November 2007
Page 26 of 26
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
Similar pages