Gamewell-FCI M46-DL Conventional fire alarm pull station Datasheet

M46-L Series
Conventional Fire Alarm Pull Stations
Description
The Gamewell-FCI M46-L Series is a cost-effective, feature-packed series of non-coded manual fire alarm pull stations. It was designed to meet multiple applications used
by the installer and end-user. The M46-L Series features a
variety of models including single- and dual-action
versions.
The M46-L Series provides conventional Fire Alarm Control Panels (FACPs), such as the Flex 400 Series with an
alarm initiating input signal. Its innovative design, durable
construction, and multiple mounting options make the
M46-L Series simple to install, maintain, and operate.
Operation
The M46-L manual pull stations provide a textured fingerhold area that includes Braille text. In addition, the terms
PUSH-IN and PULL-DOWN are labeled on the station handle, and down arrows are engraved to show the direction
to operate the station handle.
To activate the normally open alarm switch, push-in and
then pull down on the handle. When the handle is latched
in the down position, the word “ACTIVATED,” appears in
bright yellow at the top of the handle.
To reset the station, do the following:
1. Insert the key or hex (model dependent).
2. Twist clockwise, one quarter-turn.
3. Open the station’s front cover, causing the springloaded operation handle to return to its original
position.
4. To reset the alarm switch to normal (non-alarm),
manually position or close the station’s front cover.
The switch is automatically reset.
Construction
• Cover, backplate and operation handle are all molded of
durable polycarbonate material.
• Cover features white lettering and trim.
• Red color matches System Sensor’s popular
SpectrAlert® Horn/Strobe Series.
M46-L Series
Features
• Compact, aesthetic design, highly visible color,
attractive contoured shape, and light textured finish.
• Meets with ADA 5 lb. maximum pull force.
• Complies with UL® Standard 38, for manually acuated
signaling boxes.
• Easily operated ( single- or dual-action), yet designed to
prevent false alarms when bumped, shaken, or jarred.
• Push In/Pull Down handle latches in the down position
to clearly indicate the station was operated.
• The word, “Activated,” appears in bright yellow on top of
the handle, indicating the station was operated, and the
operation of the station
• Operation handle engraved with white, down arrows to
show the direction to pull the handle.
• Braille text imprinted on the finger-hold area of the operation handle and across the top of the handle
• Multiple hex- and key-lock models available
• U.S. patent pending hex-lock needs only a quarterturn to lock/unlock
• Station can be opened for inspection & maintenance
without initiating an alarm
• Product ID label is visible when opening the cover; label
is made of a durable long-life material
• The terms, “Normal” and “Activated,” are molded into
the plastic adjacent to the alarm switch( located inside)
SpectrAlert® is a trademark of Honeywell International Inc.
An ISO 9000-2000 Company
SIGNALING
®
UL is a registered trademark of Underwriter’s Laboratories Inc.
Lexan® is a registered trademark of GE Plastics, a subsidiary of General Electric
Company.
S281
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
CS-2483 Rev. A page 1 of 2
©2008 by Honeywell International Inc. All rights reserved.
Engineer’s Specifications
Features (Continued)
Manual Fire Alarm Stations shall be non-code, with a keyor hex-operated reset lock in order that they may be
tested, and so designed that after actual emergency operation, they cannot be restored to normal except by use of a
key or hex. An operated station shall automatically condition itself so as to be visually detected as activated.
• Four-position terminal strip molded into backplate.
• Terminal strip includes Phillips combination-head captive 8/32 screws for easy connection to Initiating Device
Circuit (IDC).
• Terminal screws backed-out at factory and shipped
ready to accept field wiring (up to 12 AWG/3.25 mm²).
• Switch contacts are normally open.
• Can be surface-mounted (with SB-I/O) or semi-flush
mounted. Semi-flush mount to a standard single-gang,
double-gang, or 4” (10.16 cm) square electrical box.
• Backplate is large enough to overlap a single-gang
backbox cutout by 1/2” (1.27 cm).
• Optional trim ring (BG-TR).
• Models packaged in attractive, clear plastic (PVC),
clamshell-style, packages. Packaging includes a cutaway dust/paint cover in shape of pull station.
Manual stations shall be constructed of red colored
LEXAN® (or polycarbonate equivalent) with clearly visible
operating instructions provided on the cover. The word,
FIRE, shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for the following:
• surface mounting on matching backbox SB-I/0
• semi-flush mounting on a standard single-gang, doublegang, or 4.0” (10.16 cm) square electrical box.
The stations shall be installed in compliance with the
Americans with Disabilities Act (ADA) or per national and
local requirements. Manual stations shall be Listed with
Underwriters’ Laboratories.
Specifications
Ordering Information
Electrical Specifications:
Part Number
Description
M46-SL
M46-DL
M46-OL
Manual pull station, single with key.
Manual pull station, dual with key.
Manual pull station, on door with key, no
backbox.
Manual pull station, on door with key
and backbox.
Surface backbox.
Switch
Contact Ratings: Gold-plated,
rated 0.25 A @ 30 VAC or VDC.
Auxiliary
Contact Circuit: (Terminals 3 & 4, NBG-12LA):
rated to 3.0 @ 30 VAC or VDC.
Physical Specifications:
Model
M46-L
SB-10
WP-10
M46-OLB
SB-IO
Dimensions
5.5” H x 4.12” W x 1.4” D
(13.97 H x 10.47 W x 3.5 D cm)
5.5” H x 4.3” W x 1.4” D
(13.97 H x 10.47 W x 3.5 D cm)
6” H x 4.7” W x 2” D
(15.24 H x 11.9 W x 5.08 cm)
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
CS-2483 Rev. A page 2 of 2
www.gamewell-fci.com
Similar pages