Vishay M55342M02T10E0T Thick film chip resistors, military/established reliability mil-prf-55342 qualified, type rm Datasheet

RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
FEATURES
MATERIAL SPECIFICATIONS
Resistive element
Encapsulation
Substrate
Termination
Solder finish
Ruthenium oxide
Epoxy
96 % alumina
Solder-coated nickel barrier
Tin/lead solder alloy
• Fully conforms to the requirements of
MIL-PRF-55342
• Established reliability - verified failure rate; M, P, R, U, S,
V, and T levels
• Construction is sulfur impervious against a high sulfur
environment (ASTM B 809-95 test method)
• 100 % group A screening per MIL-PRF-55342
• Termination style B - tin/lead wraparound over nickel
barrier
• Operating temperature range is -55 °C to +150 °C
• For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s
RCWPM
Jumper
(Military
M32159)
datasheet
(www.vishay.com/doc?31028)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
MIL-PRF-55342 MIL
SPEC. TERM.
STYLE
SHEET
CASE
SIZE
RCWPM-0502,
RCWPM-0502-98
RM0502
01
B
0502
RCWPM-550,
RCWPM-550-98
RM0505
02
B
0505
RCWPM-5100,
RCWPM-5100-98
RM1005
03
B
1005
RCWPM-5150,
RCWPM-5150-98
RM1505
04
B
1505
RCWPM-7225,
RCWPM-7225-98
RM2208
05
B
2208
RCWPM-575,
RCWPM-575-98
RM0705
06
B
0705 (3)
RCWPM-1206,
RCWPM-1206-98
RM1206
07
B
1206
RCWPM-2010,
RCWPM-2010-98
RM2010
08
B
2010
RCWPM-2512,
RCWPM-2512-98
RM2512
09
B
2512
RCWPM-1100,
RCWPM-1100-98
RM1010
10
B
1010
RCWPM-0402,
RCWPM-0402-98
RM0402
11
B
0402
Revision: 15-Oct-15
POWER
MAX.
RATING WORKING RESISTANCE TOLERANCE TEMPERATURE
COEFFICIENT (2)
RANGE
P70 °C VOLTAGE (1)
±%

± ppm/°C
V
W
1 to 9.1
2, 5, 10
200, 300
0.05
40
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
0.125
40
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.20
75
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.15
125
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.225
175
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.15
50
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.25
100
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.80
150
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
1.0
200
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 5.1
2, 5, 10
200, 300
0.50
75
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
0.05
30
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
Document Number: 31010
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
MIL
MIL-PRF-55342
SPEC. TERM.
STYLE
SHEET
VISHAY DALE
MODEL
CASE
SIZE
RCWPM-0603,
RCWPM-0603-98
RM0603
12
B
0603
RCWPM-0302,
RCWPM-0302-98
RM0302
13
B
0302
POWER
MAX.
TEMPERATURE
RESISTANCE
RATING WORKING
TOLERANCE
COEFFICIENT (2)
RANGE
P70 °C VOLTAGE (1)
±%

± ppm/°C
W
V
1 to 5.1
2, 5, 10
200, 300
0.10
50
5.6 to 22M
1, 2, 5, 10
100, 200, 300
5.62 to 10M
0.5
100, 200, 300
1 to 9.1
2, 5, 10
200, 300
0.04
15
10 to 22M
1, 2, 5, 10
100, 200, 300
10 to 10M
0.5
100, 200, 300
Notes
• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as
follows:
MAX. WORKING
POWER RATING
DSCC DRAWING VISHAY DALE
RES. RANGE RES. TOL. TEMP. COEF.
VOLTAGE (1)
TERM.
P70 °C
NUMBER
MODEL

±%
± ppm/°C
W
V
10 to 46.4
200
07009
RCWP-0201
B
0.05
1, 5
30
47 to 1M
100
This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg.
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
(2) Characteristics: K = ± 100 ppm/°C; L = ± 200 ppm/°C; M = ± 300 ppm/°C.
(3) MIL case size 0705 and EIA case size 0805 are dimensionally the same.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)
M
MIL
STYLE
D55342
applies to
Style 07
(RM1206)
only.
5
5
3
CHARACTERISTICS
K = 100 ppm
L = 200 ppm
M = 300 ppm
4
2
SPEC.
SHEET
M
0
TERMINATION
STYLE
2
B
1
VALUE AND
TOLERANCE
(see Standard B = Pre-tinned (see Tolerance
Electrical
nickel barrier, and Multipliers
Specifications wraparound
table)
table)
M55342
applies to
all other
styles.
0
E
FAILURE
RATE
0
R
W
PACKAGING (1)
B
SPECIAL
C = Non-ER
Blank =
TP = Tin/lead,
M = 1.0 %/1000 h
T/R (full)
Standard
P = 0.1 %/1000 h
(Dash number)
TN = Tin/lead,
R = 0.01 %/1000 h
(Up to 1 digits)
T/R (full), w/ESD
U = 0.01 %/1000 h (2) UL = Tin/lead, T/R
D = 0.5 %
tolerance (3)
S = 0.001 %/1000 h single lot date code
V = 0.001 %/1000 h (2)
S3 = Tin/lead,
S=
T/R (1000 pieces)
Space level
T = Space level
SV = Tin/lead, T/R w/option 1 part
(1000 pieces), w/ESD marking (-97) (4)
WB = Tin/lead,
T=
waffle tray
Space level (-98)
2=
WA = Tin/lead,
Option 1
waffle tray,
part marking
w/ESD
(-20) (4)
WL = Tin/lead,
waffle tray,
3=
single lot date code Options 2 and 3
part marking
S2 = Tin/lead,
(-30) (4)
T/R (500 pieces)
SU = Tin/lead, T/R
(500 pieces), w/ESD
S6 = Tin/lead,
T/R (300 pieces)
ST = Tin/lead, T/R
(300 pieces), w/ESD
Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)
M55342
MIL
STYLE
M
CHARACTERISTICS
02
B
10E0
R
WB
SPEC. SHEET
TERMINATION
STYLE
VALUE AND
TOLERANCE
FAILURE
RATE
PACKAGING
CODE
Notes
• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543).
(1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the
ESD pack codes are an optional type of packaging.
(2) Failure rates U and V require group A and B inspection ran on each production lot.
(3) Add a “D” after the packaging code at the end of the global part number to specify Vishay Dale Thick Film product with a tolerance of 0.5 %.
(4) MIL spec option 1, 2, and 3 part marking is not offered for the slash sheet 01, 02, 11, and 13 sizes.
Revision: 15-Oct-15
Document Number: 31010
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
RESISTANCE TOLERANCE AND MULTIPLIERS
TOLERANCE
MULTIPLIER
VALUE
RANGE ()
M
1
1 to 9xx
K
N
1000
1K to 9xxK
L
P
1 000 000
1M to 22M
± 0.5 %
±1%
±2%
±5%
± 10 %
W
D
G
J
Y
E
H
Z
F
T
15J0 = 15  ± 5 %
10K0 = 10 k ± 5 %
560K = 560 k ± 5 %
8L20 = 8.2 M ± 5 %
10M0 = 10  ± 10 %
10N0 = 10 k ± 10 %
2P70 = 2.7 M ± 10 %
8P20 = 8.2 M ± 10 %
11D3 = 11.3 ± 1 %
10E0 = 10 k ± 1 %
332D = 332  ± 1 %
2F21 = 2.21 M ± 1 %
51G0 = 51 ± 2 %
10H0 = 10 k ± 2 %
33H0 = 33 k ± 2 %
22T0 = 22 M ± 2 %
Examples:

38W8 = 38.8  ± 0.5 %
10Y0 = 10 k ± 0.5 %
988W = 988  ± 0.5 %
2Z13 = 2.13 M ± 0.5 %
DIMENSIONS in inches (millimeters)
D
C
B
A
E
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL
SPEC.
SHEET
A
(LENGTH)
B
(WIDTH)
C
(HEIGHT)
D
(TOP TERM)
E
(BOTTOM TERM)
RCWPM-0502
RM0502
01
0.055 ± 0.005
(1.40 ± 0.13)
0.023 ± 0.003
(0.58 ± 0.08)
0.015 ± 0.003
(0.38 ± 0.08)
0.010 ± 0.005
(0.25 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-550
RM0505
02
0.055 ± 0.005
(1.40 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.010 ± 0.005
(0.25 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-5100
RM1005
03
0.105 ± 0.005
(2.67 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-5150
RM1505
04
0.155 ± 0.005
(3.94 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-7225
RM2208
05
0.230 ± 0.005
(5.84 ± 0.13)
0.075 ± 0.005
(1.91 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-575
RM0705
06
0.080 ± 0.005
(2.03 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.016 ± 0.008
(0.41 ± 0.20)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-1206
RM1206
07
0.125 ± 0.005
(3.18 ± 0.13)
0.063 ± 0.005
(1.60 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-2010
RM2010
08
0.197 ± 0.006
(5.00 ± 0.15)
0.098 ± 0.005
(2.49 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-2512
RM2512
09
0.250 ± 0.005
(6.35 ± 0.13)
0.124 ± 0.005
(3.15 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
RCWPM-1100
RM1010
10
0.105 ± 0.005
(2.67 ± 0.13)
0.100 ± 0.005
(2.54 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-0402
RM0402
11
0.039 ± 0.003
(0.99 ± 0.08)
0.020 ± 0.003
(0.51 ± 0.08)
0.013 ± 0.003
(0.33 ± 0.08)
0.010 ± 0.005
(0.25 ± 0.13)
0.010 ± 0.005
(0.25 ± 0.13)
RCWPM-0603
RM0603
12
0.063 ± 0.005
(1.60 ± 0.13)
0.032 ± 0.005
(0.81 ± 0.13)
0.018 ± 0.005
(0.46 ± 0.13)
0.012 ± 0.005
(0.30 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
RCWPM-0302
RM0302
13
0.034 ± 0.004
(0.86 ± 0.10)
0.021 ± 0.003
(0.53 ± 0.08)
0.013 ± 0.003
(0.33 ± 0.08)
0.007 ± 0.005
(0.18 ± 0.13)
0.008 ± 0.005
(0.20 ± 0.13)
0.024 ± 0.002
(0.61 ± 0.05)
0.012 ± 0.002
(0.30 ± 0.05)
0.009 ± 0.002
(0.23 ± 0.05)
0.006 ± 0.003
(0.15 ± 0.08)
0.006 + 0.002 - 0.004
(0.15 + 0.05 - 0.10)
RCWP-0201
Revision: 15-Oct-15
Document Number: 31010
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWPM (Military M/D55342)
www.vishay.com
Vishay Dale
Rated Power in %
DERATING CURVE
120
100
80
60
40
20
0
- 55 - 25
0
25
50
75 100 125 150 175
70 Ambient Temperature in °C
CAGE CODE: 91637 and 2799A (formerly SH903)
Revision: 15-Oct-15
Document Number: 31010
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages