Connor-Winfield M78E-010.0M Precision sub-miniature 3.2x5.0mm tcxo / vctcxo Datasheet

Precision Sub-Miniature
3.2x5.0mm
TCXO / VCTCXO
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630- 851- 4722
Fax: 630- 851- 5040
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Description
Features:
The Connor-Winfield
3.2x5.0mm Temperature
Compensated Crystal Oscillators and
Voltage Controlled Temperature
Compensated Crystal Oscillators are
designed for use in applications
requiring tight frequency stability in a
small package. Through the use of
Analog Temperature Compensation,
this device is capable of holding sub
1-ppm stabilities over wide
temperature ranges.
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
±0.50ppm, ±1.00ppm or ±2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
Applications
Ordering Information
GPS Receivers
Instrumentation
Femtocells
FTTH, FTTC
M77F - 010.0M
TCXO
SERIES
Top
View
0.065
(1.65mm)
0.006 Typ.
(0.15mm)
0.028
(0.71mm)
Pad
1
2
3
4
5
6
7
8
0.042
(1.07mm)
0.016
(0.41mm)
M77F 0719
10.0MHZ
0.197
(5.0mm)
0.083 Max.
(2.1mm)
0.050
(1.27mm)
0.028
(0.71mm)
Pad 8
Pad 1
Dimensional Tolerance:
+/-0.005 (+/-0.127mm)
CENTER
FREQUENCY
Pin Connections
Package Layout
0.126
(3.2mm)
Example Part Number
0.008 Typ.
(0.20mm)
Bottom
View
0.042
(1.07mm)
Connection
Voltage Control or N/C
N/C
Do not connect
Ground
Output
N/C
Do not connect
Supply, Vcc
Ordering Information
-
M
7
7
F
Type:
Precision
TCXO
VCTCXO
3.2x5mm
Features:
4 = TCXO, Clipped Sinewave, 2.5Vdc.
7 = TCXO, Clipped Sinewave, 3.3Vdc.
8 = VCTCXO, Clipped Sinewave, 2.5Vdc.
9 = VCTCXO, Clipped Sinewave, 3.3Vdc.
Temperature Range:
5 = 0 to 70° C
7 = -20 to 70° C
8 = -30 to 85° C
Frequency Stability:
E = ± 0.50 ppm
F = ± 1.00 ppm
G = ± 2.00 ppm
010.0M
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
Example:
M77F-010.0M = 3.2x5mm, TCXO, Clipped Sinwave,
3.3Vdc, -20 to 70C, +/-1.00ppm, Output Frequency 10.0MHz
To order an M77F with an output frequency of:
6.4 MHz = M77F-006.4M
20 MHz = M77F-020.0M
38.88 MHz = M77F-038.88M
Bulletin
Page
Revision
Date
Tx193
1 of 4
P05
29 May 2008
Standard Frequencies Available *
6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz
13.5 MHz 19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz
* Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Model Specifications
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M45E
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M47E
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M48E
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M45F
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M47F
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M48F
TCXO
2.5Vdc
M75E
TCXO
3.3Vdc
M85E
VCTCXO
2.5Vdc
M95E
VCTCXO
3.3Vdc
Note
Features
±0.50ppm
0 to 70°C
M77E
TCXO
3.3Vdc
1
M87E
VCTCXO
2.5Vdc
M97E
VCTCXO
3.3Vdc
Note
±0.50ppm
-20 to 70°C
M78E
TCXO
3.3Vdc
1
M88E
VCTCXO
2.5Vdc
M98E
VCTCXO
3.3Vdc
Note
±0.50ppm
-30 to 85°C
M75F
TCXO
3.3Vdc
1
M85F
VCTCXO
2.5Vdc
M95F
VCTCXO
3.3Vdc
Note
±1.00ppm
0 to 70°C
M77F
TCXO
3.3Vdc
1
M87F
VCTCXO
2.5Vdc
M97F
VCTCXO
3.3Vdc
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
±0.50ppm, ±1.00ppm or ±2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
Note
±1.00ppm
-20 to 70°C
Test Circuit
1
DNC N/C
M78F
TCXO
3.3Vdc
M88F
VCTCXO
2.5Vdc
M98F
VCTCXO
3.3Vdc
Note
±1.00ppm
-30 to 85°C
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M45G
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M47G
TCXO
2.5Vdc
Model Number
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
M48G
TCXO
2.5Vdc
M75G
TCXO
3.3Vdc
1
.01 uF
Bypass
M85G
VCTCXO
2.5Vdc
M95G
VCTCXO
3.3Vdc
6
5
M97G
VCTCXO
3.3Vdc
1
2
3
N/C
N/C
N/C - TCXO
VC - VCTCXO
4
Note
±2.0ppm
-20 to 70°C
1
M88G
VCTCXO
2.5Vdc
M98G
VCTCXO
3.3Vdc
Note
±2.0ppm
-30 to 85°C
Note:
1) Frequency stability vs. change in temperature. [±(Fmax – Fmin)/2.Fo].
1
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Tx193
Page
2 of 4
Revision
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
Output
10Kohm 10 pF
1
M87G
VCTCXO
2.5Vdc
M78G
TCXO
3.3Vdc
7
8
Note
±2.0ppm
0 to 70°C
M77G
TCXO
3.3Vdc
AC Coupling
Capacitor
Vcc
Supply
Voltage
Date
P05
29 May 2008
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Electrical Specifications for all Models
ABSOLUTE MAXIMUM RATINGS
PARAMETER
UNITS
Storage Temperature
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
125
°C
Supply Voltage
(Vcc)
-0.5
-
6.0
Vdc
Input Voltage
(Vc)
-0.5
-
Vcc+0.5
Vdc
MINIMUM
NOMINAL
MAXIMUM
UNITS
6.4
-
40
MHz
-1.00
-
1.00
ppm
NOTE
OPERATING SPECIFICATIONS
PARAMETER
Frequency Range
Frequency Calibration
(TCXO Models)
Aging First Year
-1.0
-
1.0
ppm
Total Aging for 10 years
-4.6
-
4.6
ppm
Supply Voltage Variation. (Vcc±5%)
-0.025
-
0.025
ppm
Load Coefficient, ±5pF
NOTE
-0.025
-
0.025
ppm
Static Temperature Hysteresis
-0.4
-
0.4
ppm
2
Frequency shift after reflow soldering
-1.00
-
1.00
ppm
3
Supply Voltage
2.5v Models
(Vcc)
2.375
2.500
2.625
Vdc
4
3.3V Models
(Vcc)
3.135
3.300
3.465
Vdc
4
(Icc)
-
-
2
mA
Supply Current
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
-
-
1
ps rms
SSB Phase Noise at 10Hz offset
-
-80
-
dBc/Hz
SSB Phase Noise at 100Hz offset
-
-110
-
dBc/Hz
SSB Phase Noise at 1KHz offset
-
-130
-
dBc/Hz
SSB Phase Noise at >10KHz offset
-
-145
-
dBc/Hz
Features
1
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
±0.50ppm, ±1.00ppm or ±2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
INPUT CHARACTERISTICS for VOLTAGE CONTROL (Pad 1)
PARAMETER
Control Voltage Range
2.5v Models
(Vc)
3.3v Models
(Vc)
Frequency Tuning
Linearity
Slope
MINIMUM
NOMINAL
MAXIMUM
UNITS
0.2
1.2
2.2
Vdc
0.5
1.5
2.5
±10
-
-
ppm
±5
-
-
%
Notes
Test Circuit
DNC N/C
Positive
AC Coupling
Capacitor
Vcc
Supply
Voltage
CLIPPED SINEWAVE OUTPUT CHARACTERISTICS (Pad 6)
PARAMETER
MINIMUM
NOMINAL
MAXIMUM
UNITS
Output Voltage
1.00
-
-
V pk-pk
Output Load Resistance
-
10K
-
Ohms
Output Load Capacitance
-
10
-
pF
Notes
Load
.01 uF
Bypass
7
8
6
5
1
2
3
N/C
N/C
N/C - TCXO
VC - VCTCXO
4
5
PACKAGE CHARACTERISTICS
Package
Ceramic Surface Mount Package.
ENVIRONMENTALS
Vibration:
Shock:
Soldering:
Sollderability
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant, lead free. See solder profile page 4.
Sollderability per Mil Std 883E Method 2003
Note:
1) TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of
operation.
2) Frequency change after reciprocal temperature ramped over the operating range.
Frequency measured before and after at 25ºC.
3) Within two hours after reflow.
4) For best in application performance, careful selection of an external power source is
critical. Select an external regulator that meets or exceeds to following specifications
regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage
noise, and low voltage noise density. Factory Test Conditions: Initial Accuracy ±2mv,
Noise (0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/sqrt Hz, Temperature
Coefficient < 5ppm/°C.
5) Output is DC coupled
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
Output
10Kohm 10 pF
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Tx193
Page
3 of 4
Revision
Date
P05
29 May 2008
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Suggested Pad Layout
To
Output
0.028
(0.71mm)
Typical Phase Noise
Model M77F-010.0MHz
External AC
Coupling
Capacitor
5
0.053
(1.35mm)
4
Top
View
External
Bypass
Capacitor
0.01 uF
0.098
(2.49mm)
1
8
0.050
(1.27mm)
0.050
(1.27mm)
To
Ground
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
120 S
Max.
Tape and Reel Specifications
Time
10 S
60 S
Max.
360 Sec. Max.
Output Waveform
0
200 mV/Div
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Tx193
Page
4 of 4
Revision
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
Date
P05
29 May 2008
Similar pages