Vishay M8340103K1004JAD05 Thick film resistor networks, military, mil-prf-83401 qualified, type rz030, schematics a (11), b (12), j (15) Datasheet

DFM (Military M83401)
Vishay Dale
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ030, Schematics A (11), B (12), J (15)
FEATURES
• 11, 12, 15 Schematics; hot-solder dipped
• MIL-PRF-83401 qualified
• Thick film resisitive elements
• TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)
characteristic
• 100 % screen tested per Group A, Subgroup 1 of
MIL-PRF-83401
• 0.065" [1.65 mm] height for high density packaging
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
POWER RATING
P70 °C
ELEMENT
W
P70 °C
PACKAGE
W
CIRCUIT
SCHEMATIC
LIMITING ELEMENT
VOLTAGE
MAX.
V≅
TEMPERATURE
COEFFICIENT (1)
(- 55 °C to + 125 °C)
STANDARD (2)
TOLERANCE
%
RESISTANCE
RANGE
Ω
0.050
0.025
0.015
0.350
0.325
0.350
11
12
15
50
50
50
K, M
K, M
K, M
2
2
2
10R0 - 1M0
10R0 - 1M0
see table
DFM
Notes
(1) K = ± 100 ppm/°C; M = ± 300 ppm/°C
(2) ± 1 % and ± 5 % tolerance available
• Consult factory for stocked values
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340103M6801GAD05 (preferred part numbering format)
M
8
3
4
0
1
0
3
M
6
8
0
1
G
RESISTANCE
TOLERANCE
VALUE
M83401
03
3 digit significant
F=±1%
K = 100 ppm
M = 300 ppm
figure, followed
G=±2%
by a multiplier
J=±5%
10R0 = 10 Ω
3302 = 33 k Ω
1004 = 1 MΩ
Historical Part Number example: M8340103M6801G A (will continue to be accepted)
MIL STYLE
SPEC SHEET CHARACTERISTIC
A
D
0
5
SCHEMATIC
PACKAGING
A = Isolated
B = Bussed
D05 = Tin/Lead, Tube
DSL = Tin/Lead, Tube,
Single Lot Date Code
M83401
03
M
6801
G
A
D05
MIL STYLE
SPEC SHEET
CHARACTERISTIC
RESISTANCE
VALUE
TOLERANCE
SCHEMATIC
PACKAGING
New Global Part Numbering: M8340103KA001GJD05 (preferred part numbering format)
M
MIL STYLE
M83401
8
3
4
0
1
0
SPEC SHEET CHARACTERISTIC
03
K = 100 ppm
M = 300 ppm
3
K
A
RESISTANCE
VALUE
Per Std. MIL. Spec
(see Impedence
Codes table)
0
0
1
G
J
D
0
5
TOLERANCE
SCHEMATIC
PACKAGING
F=±1%
G=±2%
J=±5%
J = Dual
Terminator
D05 = Tin/Lead, Tube
DSL = Tin/Lead, Tube,
Single Lot Date Code
Historical Part Number example: M8340103KA001GJ (will continue to be accepted)
M83401
03
K
A001
G
J
D05
MIL STYLE
SPEC SHEET
CHARACTERISTIC
RESISTANCE
VALUE
TOLERANCE
SCHEMATIC
PACKAGING
www.vishay.com
330
For technical questions, contact: [email protected]
Document Number: 31517
Revision: 08-Jul-08
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ030, Schematics A (11), B (12), J (15)
Vishay Dale
DIMENSIONS in inches [millimeters]
Pin #1
0.050 [1.27]
Typ.
0.365 [9.27] Min.
0.385 [9.78] Max.
0.019 ± 0.006
[0.483 ± 0.15]
0.250 [6.35]
Min.
0.075
[1.91]
Max.
12 Schematic
DFM1411
Package
0.350
0.200
15 Schematic
Power Rating (W)
Power Rating (W)
Power Rating (W)
0.400
0.400
DFM1412
Package
0.325
DFM1415
Package
0.350
Single
Resistor
0.050
0.025
Derating
0.400
0.200
0.200
Single
Resistor
- 55
+ 25
+ 70
+ 125 + 150
0.005 + 0.004
- 0.002
[0.127 + 0.102
- 0.051]
0.825 [20.96]
Max.
0.305
[7.75]
Max.
11 Schematic
0.250 [6.35]
Min.
Single
Resistor
0.015
- 55
+ 25
+ 70
+ 125 + 150
- 55
Ambient Temperature °C
Ambient Temperature °C
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Permanency testing per MIL-PRF-83401
Solderability
Per MIL-PRF-83401
Per MIL-STD-1276
DFM1411, DFM1412 and DFM1415 = Type G (hot solder dipped)
Hot solder dipped leads supplied as standard finish.
Terminals
Body
Epoxy filled ceramic sandwich
IMPEDANCE CODES
CODE
R1 (Ω)
R2 (Ω)
CODE
R1 (Ω)
R2 (Ω)
A001
82
130
A010
330
470
A002
120
200
A011
330
680
A003
130
210
A012
1.5K
3.3K
A004
160
260
A013
3K
6.2K
A005
180
240
A014
180
270
A006
180
390
A015
270
270
A007
220
270
A016
560
560
A008
220
330
A017
560
1.2K
A009
330
390
A018
620
2.7K
Document Number: 31517
Revision: 08-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
331
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ030, Schematics A (11), B (12), J (15)
Vishay Dale
CIRCUIT APPLICATIONS
11 Schematic
DFM1411 (M8340103xxxxxxA)
7 isolated resistors
The DFM1411 provides the user with 7 nominally equal resistors with each resistor isolated from
all others. Commonly used in the following applications:
DFM1411
Pin #1
• “Wired OR” Pull-up
• Line Termination
• LED Current Limiting
• Power Driven Pull-up
• ECL Output Pull-down
• Power Gate Pull-up
• TTL Input Pull-down
• Long-line Impedance balancing
12 Schematic
DFM1412 (M8340103xxxxxxB)
13 resistors with one pin common
The DFM1412 provides the user with a choice of 13 nominally equal resistors, each connected
• • • • • • •
to a common pin. Commonly used in the following applications:
DFM1412
Pin #1
• MOS/ROM Pull-up/
• “Wired OR” Pull-up
• Pull-down
• Power Driven Pull-up
• Digital Pulse Squaring
• TTL Input Pull-down
• Open Collector Pull-up
• TTL Unused Gate Pull-up
• High Speed Parallel Pull-up
15 Schematic
DFM1415 (M8340103xxxxxxJ)
14
R1
R1
R2
R1
1R2
R1
R2
R1
R2
R1
R2
R2
R1
R2
R1
R1
R2
R2
R1
R2
12 pairs of resistors
R1
R2
R1
R2
The DFM1415 provides the user with a choice of 12 pairs of R1/R2 resistor values for pulse
squaring and TTL dual-line terminating requirements.
DFM1415
CAGE CODE: 91637
www.vishay.com
332
For technical questions, contact: [email protected]
Document Number: 31517
Revision: 08-Jul-08
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ030, Schematics A (11), B (12), J (15)
Vishay Dale
PERFORMANCE
MAX. ΔR (Typical Test Lots)
TEST
CONDITIONS
Power Conditioning
1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature
± 0.50 % ΔR
Thermal Shock
5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
Short Time Overload
2.5 x rated working voltage for 5 s
± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Low Temperature Operation
45 min at full rated working voltage at - 65 °C
± 0.25 % ΔR (Char. K)
± 0.50 % ΔR (Char. M)
Moisture Resistance
240 h with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Resistance to Soldering Heat
Leads immersed in + 260 °C solder to within 1/16" of body for 10 s
± 0.25 % ΔR
Shock
Total of 18 shocks at 100 g's
± 0.25 % ΔR
Vibration
12 h at maximum of 20 g's between 10 and 2000 Hz
± 0.25 % ΔR
Load Life
1000 h at + 70 °C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
Terminal Strength
1.5 pound pull for 30 s
± 0.25 % ΔR
Insulation Resistance
10 000 MΩ (minimum)
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 V RMS for 1 min)
-
Document Number: 31517
Revision: 08-Jul-08
For technical questions, contact: [email protected]
± 0.50 % ΔR (Char. K)
± 2.0 % ΔR (Char. M)
www.vishay.com
333
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages