Panasonic MA196 Silicon epitaxial planar type Datasheet

Switching Diodes
MA2C196 (MA196)
Silicon epitaxial planar type
Unit : mm
For switching circuits
φ 0.45 max.
COLORED BAND
INDICATES
CATHODE
Unit
VR
50
V
Repetitive peak reverse voltage
VRRM
50
V
Average forward current
IF(AV)
100
mA
Repetitive peak forward current
IFRM
225
mA
Non-repetitive peak forward
surge current*
IFSM
500
mA
Junction temperature
Tj
200
°C
Storage temperature
Tstg
−55 to +200
°C
13 min.
Rating
0.2 max.
Forward voltage (DC)
Symbol
2.2 ± 0.3
1st Band
2nd Band
■ Absolute Maximum Ratings Ta = 25°C
Parameter
13 min.
• Low forward dynamic resistance rf
• Small terminal capacitance, Ct
1
0.2 max.
■ Features
2
φ 1.75 max.
1 : Cathode
2 : Anode
JEDEC : DO-34
Note) * : t = l s
■ Electrical Characteristics Ta = 25°C
Parameter
Reverse current (DC)
Symbol
Conditions
Min
Typ
Max
Unit
5
nA
IR1
VR = 15 V
IR2
VR = 50 V
10
nA
IR3
VR = 50 V, Ta = 150°C
100
µA
Forward voltage (DC)
VF
IF = 100 mA
1.2
V
Reverse voltage (DC)
VR
IR = 100 µA
Terminal capacitance
Ct
VR = 0 V, f = 1 MHz
4
pF
Forward dynamic resistance
rf1
IF = 3 mA, f = 30 MHz
2.5
Ω
rf2
IF = 3 mA, f = 30 MHz
3.6
Ω
trr
IF = 10 mA, VR = 1 V
Irr = 0.1 · IR, RL = 100 Ω
0.2
ms
Reverse recovery
time*
Note) 1. Rated input/output frequency: 2.5 kHz
2. * : trr measuring circuit
50
Bias Application Unit N-50BU
V
Input Pulse
tp
tr
10%
A
VR
■ Cathode Indication
Type No.
Color
MA2C196
1st Band
Green
2nd Band
Green
Pulse Generator
(PG-10N)
Rs = 50 Ω
W.F.Analyzer
(SAS-8130)
Ri = 50 Ω
90%
tp = 2 µs
tr = 0.35 ns
δ = 0.05
Output Pulse
t
IF
trr
t
Irr = 0.1 · IR
IF = 10 mA
VR = 1 V
RL = 100 Ω
Note) The part number in the parenthesis shows conventional part number.
201
MA2C196
Switching Diodes
VF  Ta
0.8
10
Ta = 150°C
1
100°C
25°C
− 20°C
10−1
10−2
0
0.2
0.4
0.6
0.8
1.0
IF = 10 mA
3 mA
0.6
1 mA
0.4
0.1 mA
0
−40
1.2
40
Ct  VR
Forward dynamic resistance rf (Ω)
Terminal capacitance Ct (pF)
120
5
4
3
2
1
0
10
20
30
40
160
50
60
f = 30 MHz
10
1
0.1
0.01
0.1
10
100°C
1
0.3
1
3
10
30
Forward current IF (mA)
25°C
0
10
20
30
40
Reverse voltage VR (V)
r f  IF
Reverse voltage VR (V)
202
80
100
f = 1 MHz
Ta = 25°C
Ta = 150°C
10−2
0
Ambient temperature Ta (°C)
6
102
10−1
0.2
Forward voltage VF (V)
0
IR  V R
103
Reverse current IR (µA)
102
VF (V)
1.0
Forward voltage
Forward current IF (mA)
IF  VF
103
100
50
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
Similar pages