MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Features • Non-Magnetic Package Suitable for MRI Applications • Rectangular MELF SMQ Ceramic Package • Hermetically Sealed • Low Rs for Lower Series Loss • Long τL for Low Intermodulation Distortion • Low Cj for High Series Isolation • High Average Incident Power Handling Capability Description and Applications The MA4P7470F-1072T is a surface mountable PIN diode in a non-magnetic Metal Electrode Leadless Faced (MELF) package.The device incorporates M/A-COM’s time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. The package utilizes M/A-COM’s new non- magnetic plating process to provide an extremely low permeability, hermetically sealed package. Incorporated in the package is a passivated PIN diode that is full face bonded on both the cathode and anode of the chip to maximize surface area for low electrical and thermal resistance. The MA4P7470F-1072T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. This MA4P7470F1072T non-magnetic device is similar in electrical performance to the MA4P7417F-1072T magnetic part number. The diode is well suited for use in low loss, low distortion, and high power switching circuits applicable for high magnetic field environments from HF through UHF frequencies. The lower thermal resistance of this device provides excellent higher average performance at RF power incident levels up to 200 watts CW. This device is designed to meet the most rigorous electrical and mechanical requirements of MRI testing environments. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods. Absolute Maximum Ratings1 @ +25°C Parameter Absolute Maximum Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C Diode Junction Temperature +175°C Continuous Diode Mounting Temperature +265 °C for 10 seconds RF C.W. Incident Power + 53dBm C.W. Forward D.C. Current + 150mA Reverse D.C. Voltage @ -10 uA - 800V 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Environmental Capability HIPAX devices are applicable for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. MIL-STD-750 Test Method Description High Temperature Storage 1031 +150 °C, for 340 Hours Temperature Shock 1051 -65 °C to +125 °C, 20 Cycles HTRB 1038 80% of rated VB, +150 °C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85 % RH, +85° C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000 G’s, 60 Hz, x, y, z axis Solderability 2026 Test Temperature = +245 °C Ordering Information Part Number Package MA4P7470F-1072T Tape and Reel 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Electrical Specifications @ +25 °C Parameter Symbol Condition Unit Value Forward Voltage (Maximum) VF IF = +100mA 1.0VDC Voltage Rating (Minimum) VR Ir = -10uA l – 800 l VDC Total Capacitance (Maximum) CT -100V @ 100MHz 0.7pF Series Resistance (Maximum) RS +100mA @ 100MHz 0.8 Ohms Parallel Resistance (Minimum) RP -10V @ 100MHz 50K Ω Carrier Lifetime (Nominal) τL +6mA / -10mA @ (50% - 90% Voltage) 6.5 us I-Region Length (Nominal) μm - 140 μm C.W. Thermal Resistance (Maximum) θ IH = 1A, IL = 10mA, T = 1mS 13°C/W Power Dissipation in Free Air (Maximum) W IF = +100mA 4W Power Dissipation with Diode Case at Tambient (Maximum) PD IF = +100mA 12W 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Mechanical Outline Case Style 1072 Dimensions in Inches (mm) A Square Min / Max B Min / Max C Min / Max 0.080 / 0.095 (2.03 / 2.41) 0.115 / 0.135 (2.92/ 3.43) 0.008 / 0.030 (.203 / .762) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Typical Electrical Performance MA4P7470F-1072T Rs vs I 1000 1 GHz Rs (Ohms) 100 100 MHz 10 1 0.1 0.01 0.10 1.00 10.00 100.00 I ( mA ) MA4P7470F-1072T Rp vs Voltage Rp ( Ohms ) 1.0E+ 05 Rp_ 1.5 GHz 1.0E+ 04 1.0E+ 03 1.00 10.00 100.00 V oltage ( V ) 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Typical Electrical Performance MA4P7470F-1072T Ct vs Voltage 1 Ct (pF) 1500 MHz 100 MHz 0.1 0.1 1.0 10.0 100.0 Voltage ( V ) MA4P7470F-1072T Ls vs Frequency 1 Ls (nH) Ls_50 mA 0.1 100.0 Frequency ( MHz ) 1000.0 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Rev. V2 Typical Non-Magnetic Performance Comparison of Magnetic Moment vs H Field for MA4P7400-1072T Non-Magnetic Series & MA4P1250-1072T Magnetic Devices 2.50E-02 2.00E-02 Device Magnetic Moment (EMU) 1.50E-02 MA4P1250-1072T Magnetic 1.00E-02 5.00E-03 0.00E+00 -5.00E-03 MA4P7400-1072T Non-Magnetic Series -1.00E-02 -1.50E-02 -2.00E-02 -2.50E-02 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Table 1 - Typical Magnetic Properties of Non-Magnetic MA4P7470F-1072T Device vs. A Conventional MA4P1250-1072T Magnetic Device Magnetic Property MA4P7470F-1072T Value MA4P1250-1072T Value Saturation Moment (EMU) @ H = HMAX Oersteads 2.3 x E-4 2.1 x E-2 Remanance Moment (EMU) @ H = 0 Oersteads 4.2 x E-8 7.1 x E-3 Coercivity (Oersteads) @ EMU = 0 Moment 1 59.2 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.